treemanifests: remove _loadalllazy in _diff()
The benchmarks below use a similar setup as in ee7ee0c516ca and my other recent
commits. Yes, in some cases this runs in literally 5% of the time it
previously took.
before = a6f8ab53
diff --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.301 s +- 0.004 s | 1.309 s +- 0.012 s | 100.6%
m-u | | x | 1.303 s +- 0.009 s | 1.302 s +- 0.006 s | 99.9%
m-u | x | | 1.308 s +- 0.006 s | 1.309 s +- 0.007 s | 100.1%
m-u | x | x | 85.7 ms +- 0.6 ms | 86.0 ms +- 0.3 ms | 100.4%
l-d-r | | | 197.5 ms +- 0.7 ms | 197.8 ms +- 2.2 ms | 100.2%
l-d-r | | x | 199.4 ms +- 0.6 ms | 199.3 ms +- 0.9 ms | 99.9%
l-d-r | x | | 86.1 ms +- 0.5 ms | 85.8 ms +- 0.9 ms | 99.7%
l-d-r | x | x | 64.4 ms +- 0.4 ms | 64.4 ms +- 0.3 ms | 100.0%
diff -c . --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 236.7 ms +- 1.1 ms | 236.5 ms +- 1.3 ms | 99.9%
m-u | | x | 158.7 ms +- 1.0 ms | 128.0 ms +- 1.0 ms | 80.7% <--
m-u | x | | 239.7 ms +- 1.8 ms | 238.1 ms +- 1.5 ms | 99.3%
m-u | x | x | 132.4 ms +- 0.9 ms | 132.3 ms +- 0.6 ms | 99.9%
l-d-r | | | 81.8 ms +- 0.4 ms | 81.8 ms +- 0.3 ms | 100.0%
l-d-r | | x | 3.894 s +- 0.017 s | 193.6 ms +- 0.4 ms | 5.0% <--
l-d-r | x | | 106.9 ms +- 0.4 ms | 106.6 ms +- 0.3 ms | 99.7%
l-d-r | x | x | 182.7 ms +- 0.8 ms | 183.3 ms +- 0.9 ms | 100.3%
rebase -r . --keep -d .^^:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 5.615 s +- 0.109 s | 5.562 s +- 0.015 s | 99.1%
m-u | | x | 5.701 s +- 0.027 s | 5.715 s +- 0.023 s | 100.2%
m-u | x | | 5.572 s +- 0.128 s | 5.613 s +- 0.182 s | 100.7%
m-u | x | x | 633.3 ms +- 28.7 ms | 636.2 ms +- 13.8 ms | 100.5%
l-d-r | | | 666.4 ms +- 17.0 ms | 658.5 ms +- 9.3 ms | 98.8%
l-d-r | | x | 6.520 s +- 0.070 s | 6.505 s +- 0.026 s | 99.8%
l-d-r | x | | 279.0 ms +- 13.0 ms | 276.5 ms +- 4.7 ms | 99.1%
l-d-r | x | x | 1.636 s +- 0.058 s | 1.657 s +- 0.014 s | 101.3%
status --change . --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 218.6 ms +- 1.4 ms | 217.9 ms +- 1.5 ms | 99.7%
m-u | | x | 138.5 ms +- 0.4 ms | 108.4 ms +- 0.2 ms | 78.3% <--
m-u | x | | 220.1 ms +- 1.3 ms | 219.7 ms +- 1.5 ms | 99.8%
m-u | x | x | 113.2 ms +- 0.4 ms | 112.4 ms +- 0.8 ms | 99.3%
l-d-r | | | 80.2 ms +- 0.3 ms | 80.6 ms +- 0.6 ms | 100.5%
l-d-r | | x | 3.899 s +- 0.020 s | 194.8 ms +- 4.0 ms | 5.0% <--
l-d-r | x | | 83.4 ms +- 0.8 ms | 83.2 ms +- 0.2 ms | 99.8%
l-d-r | x | x | 732.2 ms +- 4.3 ms | 194.9 ms +- 1.0 ms | 26.6% <--
status --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.917 s +- 0.005 s | 1.914 s +- 0.004 s | 99.8%
m-u | | x | 1.909 s +- 0.012 s | 1.934 s +- 0.004 s | 101.3%
m-u | x | | 1.915 s +- 0.005 s | 1.904 s +- 0.004 s | 99.4%
m-u | x | x | 94.8 ms +- 0.3 ms | 94.7 ms +- 0.2 ms | 99.9%
l-d-r | | | 593.9 ms +- 1.2 ms | 594.6 ms +- 9.4 ms | 100.1%
l-d-r | | x | 595.2 ms +- 3.8 ms | 597.2 ms +- 2.6 ms | 100.3%
l-d-r | x | | 182.5 ms +- 1.6 ms | 182.1 ms +- 0.6 ms | 99.8%
l-d-r | x | x | 149.6 ms +- 0.9 ms | 149.1 ms +- 0.8 ms | 99.7%
update $rev^; ~/src/hg/hg{hg}/hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 3.121 s +- 0.007 s | 3.129 s +- 0.012 s | 100.3%
m-u | | x | 2.972 s +- 0.011 s | 2.981 s +- 0.012 s | 100.3%
m-u | x | | 3.144 s +- 0.014 s | 3.141 s +- 0.011 s | 99.9%
m-u | x | x | 312.2 ms +- 2.4 ms | 312.3 ms +- 2.1 ms | 100.0%
l-d-r | | | 444.4 ms +- 4.3 ms | 446.9 ms +- 5.3 ms | 100.6%
l-d-r | | x | 9.159 s +- 0.069 s | 9.182 s +- 0.040 s | 100.3%
l-d-r | x | | 254.6 ms +- 1.6 ms | 255.2 ms +- 1.6 ms | 100.2%
l-d-r | x | x | 1.525 s +- 0.007 s | 1.577 s +- 0.007 s | 103.4% <--?
Differential Revision: https://phab.mercurial-scm.org/D4845
Tests discovery against servers without getbundle support:
$ cat >> $HGRCPATH <<EOF
> [ui]
> logtemplate="{rev} {node|short}: {desc} {branches}\n"
> EOF
$ cp $HGRCPATH $HGRCPATH-withcap
$ CAP="getbundle known changegroupsubset bundle2"
$ . "$TESTDIR/notcapable"
$ cp $HGRCPATH $HGRCPATH-nocap
$ cp $HGRCPATH-withcap $HGRCPATH
Prep for test server without branchmap support
$ CAP="branchmap"
$ . "$TESTDIR/notcapable"
$ cp $HGRCPATH $HGRCPATH-nocap-branchmap
$ cp $HGRCPATH-withcap $HGRCPATH
Setup HTTP server control:
$ remote=http://localhost:$HGPORT/
$ export remote
$ tstart() {
> echo '[web]' > $1/.hg/hgrc
> echo 'push_ssl = false' >> $1/.hg/hgrc
> echo 'allow_push = *' >> $1/.hg/hgrc
> cp $HGRCPATH-nocap $HGRCPATH
> hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log
> cat hg.pid >> $DAEMON_PIDS
> }
$ tstop() {
> killdaemons.py
> cp $HGRCPATH-withcap $HGRCPATH
> }
Both are empty:
$ hg init empty1
$ hg init empty2
$ tstart empty2
$ hg incoming -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg outgoing -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg pull -R empty1 $remote
pulling from http://localhost:$HGPORT/
no changes found
$ hg push -R empty1 $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ tstop
Base repo:
$ hg init main
$ cd main
$ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
$ hg log -G
o 11 a19bfa7e7328: r11 both
|
o 10 8b6bad1512e1: r10 both
|
o 9 025829e08038: r9 both
|\
| o 8 d8f638ac69e9: r8 name2
| |
| o 7 b6b4d315a2ac: r7 name2
| |
| o 6 6c6f5d5f3c11: r6 name2
| |
| o 5 70314b29987d: r5 name2
| |
o | 4 e71dbbc70e03: r4 name1
| |
o | 3 2c8d5d5ec612: r3 name1
| |
o | 2 a7892891da29: r2 name1
|/
o 1 0019a3b924fd: r1
|
o 0 d57206cc072a: r0
$ cd ..
$ tstart main
Full clone:
$ hg clone main full
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd full
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is empty:
$ cd empty1
$ hg incoming $remote --rev name1
comparing with http://localhost:$HGPORT/
abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
[255]
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
requesting all changes
adding changesets
adding manifests
adding file changes
added 12 changesets with 24 changes to 2 files
new changesets d57206cc072a:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is subset:
$ cp $HGRCPATH-withcap $HGRCPATH
$ hg clone main subset --rev name2 ; cd subset
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cp $HGRCPATH-nocap $HGRCPATH
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets a7892891da29:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Remote is empty:
$ tstop ; tstart empty2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 12 changesets with 24 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is superset:
$ tstop
$ hg clone main subset2 --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ tstart subset2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
abort: push creates new remote branches: both, name1!
(use 'hg push --new-branch' to create new remote branches)
[255]
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 6 changesets with 12 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Partial pull:
$ tstop ; tstart main
$ hg clone $remote partial --rev name2
abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
[255]
$ hg init partial; cd partial
$ hg incoming $remote --rev name2
comparing with http://localhost:$HGPORT/
abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
[255]
$ hg pull $remote --rev name2
pulling from http://localhost:$HGPORT/
abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
[255]
$ cd ..
$ tstop
Exercise pushing to server without branchmap capability
$ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap
$ hg init rlocal
$ cd rlocal
$ echo A > A
$ hg ci -Am A
adding A
$ cd ..
$ hg clone rlocal rremote
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd rlocal
$ echo B > B
$ hg ci -Am B
adding B
$ cd ..
$ tstart rremote
$ cd rlocal
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
1 27547f69f254: B
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
1 local changesets published
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop