Mercurial > hg-stable
view mercurial/hbisect.py @ 39877:733db72f0f54
revlog: move revision verification out of verify
File revision verification is performing low-level checks of file
storage, namely that flags are appropriate and revision data can
be resolved.
Since these checks are somewhat revlog-specific and may not
be appropriate for alternate storage backends, this commit moves
those checks from verify.py to revlog.py.
Because we're now emitting warnings/errors that apply to specific
revisions, we taught the iverifyproblem interface to expose the
problematic node and to report this node in verify output. This
was necessary to prevent unwanted test changes.
After this change, revlog.verifyintegrity() and file verify code
in verify.py both iterate over revisions and resolve their fulltext.
But they do so in separate loops. (verify.py needs to resolve
fulltexts as part of calling renamed() - at least when using revlogs.)
This should add overhead.
But on the mozilla-unified repo:
$ hg verify
before: time: real 700.640 secs (user 585.520+0.000 sys 23.480+0.000)
after: time: real 682.380 secs (user 570.370+0.000 sys 22.240+0.000)
I'm not sure what's going on. Maybe avoiding the filelog attribute
proxies shaved off enough time to offset the losses? Maybe fulltext
resolution has less overhead than I thought?
I've left a comment indicating the potential for optimization. But
because it doesn't produce a performance regression on a large
repository, I'm not going to worry about it.
Differential Revision: https://phab.mercurial-scm.org/D4745
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Mon, 24 Sep 2018 11:27:47 -0700 |
parents | 71f189941791 |
children | 566daffc607d |
line wrap: on
line source
# changelog bisection for mercurial # # Copyright 2007 Matt Mackall # Copyright 2005, 2006 Benoit Boissinot <benoit.boissinot@ens-lyon.org> # # Inspired by git bisect, extension skeleton taken from mq.py. # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import import collections from .i18n import _ from .node import ( hex, short, ) from . import ( error, ) def bisect(repo, state): """find the next node (if any) for testing during a bisect search. returns a (nodes, number, good) tuple. 'nodes' is the final result of the bisect if 'number' is 0. Otherwise 'number' indicates the remaining possible candidates for the search and 'nodes' contains the next bisect target. 'good' is True if bisect is searching for a first good changeset, False if searching for a first bad one. """ changelog = repo.changelog clparents = changelog.parentrevs skip = set([changelog.rev(n) for n in state['skip']]) def buildancestors(bad, good): badrev = min([changelog.rev(n) for n in bad]) ancestors = collections.defaultdict(lambda: None) for rev in repo.revs("descendants(%ln) - ancestors(%ln)", good, good): ancestors[rev] = [] if ancestors[badrev] is None: return badrev, None return badrev, ancestors good = False badrev, ancestors = buildancestors(state['bad'], state['good']) if not ancestors: # looking for bad to good transition? good = True badrev, ancestors = buildancestors(state['good'], state['bad']) bad = changelog.node(badrev) if not ancestors: # now we're confused if (len(state['bad']) == 1 and len(state['good']) == 1 and state['bad'] != state['good']): raise error.Abort(_("starting revisions are not directly related")) raise error.Abort(_("inconsistent state, %d:%s is good and bad") % (badrev, short(bad))) # build children dict children = {} visit = collections.deque([badrev]) candidates = [] while visit: rev = visit.popleft() if ancestors[rev] == []: candidates.append(rev) for prev in clparents(rev): if prev != -1: if prev in children: children[prev].append(rev) else: children[prev] = [rev] visit.append(prev) candidates.sort() # have we narrowed it down to one entry? # or have all other possible candidates besides 'bad' have been skipped? tot = len(candidates) unskipped = [c for c in candidates if (c not in skip) and (c != badrev)] if tot == 1 or not unskipped: return ([changelog.node(c) for c in candidates], 0, good) perfect = tot // 2 # find the best node to test best_rev = None best_len = -1 poison = set() for rev in candidates: if rev in poison: # poison children poison.update(children.get(rev, [])) continue a = ancestors[rev] or [rev] ancestors[rev] = None x = len(a) # number of ancestors y = tot - x # number of non-ancestors value = min(x, y) # how good is this test? if value > best_len and rev not in skip: best_len = value best_rev = rev if value == perfect: # found a perfect candidate? quit early break if y < perfect and rev not in skip: # all downhill from here? # poison children poison.update(children.get(rev, [])) continue for c in children.get(rev, []): if ancestors[c]: ancestors[c] = list(set(ancestors[c] + a)) else: ancestors[c] = a + [c] assert best_rev is not None best_node = changelog.node(best_rev) return ([best_node], tot, good) def extendrange(repo, state, nodes, good): # bisect is incomplete when it ends on a merge node and # one of the parent was not checked. parents = repo[nodes[0]].parents() if len(parents) > 1: if good: side = state['bad'] else: side = state['good'] num = len(set(i.node() for i in parents) & set(side)) if num == 1: return parents[0].ancestor(parents[1]) return None def load_state(repo): state = {'current': [], 'good': [], 'bad': [], 'skip': []} for l in repo.vfs.tryreadlines("bisect.state"): kind, node = l[:-1].split() node = repo.lookup(node) if kind not in state: raise error.Abort(_("unknown bisect kind %s") % kind) state[kind].append(node) return state def save_state(repo, state): f = repo.vfs("bisect.state", "w", atomictemp=True) with repo.wlock(): for kind in sorted(state): for node in state[kind]: f.write("%s %s\n" % (kind, hex(node))) f.close() def resetstate(repo): """remove any bisect state from the repository""" if repo.vfs.exists("bisect.state"): repo.vfs.unlink("bisect.state") def checkstate(state): """check we have both 'good' and 'bad' to define a range Raise Abort exception otherwise.""" if state['good'] and state['bad']: return True if not state['good']: raise error.Abort(_('cannot bisect (no known good revisions)')) else: raise error.Abort(_('cannot bisect (no known bad revisions)')) def get(repo, status): """ Return a list of revision(s) that match the given status: - ``good``, ``bad``, ``skip``: csets explicitly marked as good/bad/skip - ``goods``, ``bads`` : csets topologically good/bad - ``range`` : csets taking part in the bisection - ``pruned`` : csets that are goods, bads or skipped - ``untested`` : csets whose fate is yet unknown - ``ignored`` : csets ignored due to DAG topology - ``current`` : the cset currently being bisected """ state = load_state(repo) if status in ('good', 'bad', 'skip', 'current'): return map(repo.changelog.rev, state[status]) else: # In the following sets, we do *not* call 'bisect()' with more # than one level of recursion, because that can be very, very # time consuming. Instead, we always develop the expression as # much as possible. # 'range' is all csets that make the bisection: # - have a good ancestor and a bad descendant, or conversely # that's because the bisection can go either way range = '( bisect(bad)::bisect(good) | bisect(good)::bisect(bad) )' _t = repo.revs('bisect(good)::bisect(bad)') # The sets of topologically good or bad csets if len(_t) == 0: # Goods are topologically after bads goods = 'bisect(good)::' # Pruned good csets bads = '::bisect(bad)' # Pruned bad csets else: # Goods are topologically before bads goods = '::bisect(good)' # Pruned good csets bads = 'bisect(bad)::' # Pruned bad csets # 'pruned' is all csets whose fate is already known: good, bad, skip skips = 'bisect(skip)' # Pruned skipped csets pruned = '( (%s) | (%s) | (%s) )' % (goods, bads, skips) # 'untested' is all cset that are- in 'range', but not in 'pruned' untested = '( (%s) - (%s) )' % (range, pruned) # 'ignored' is all csets that were not used during the bisection # due to DAG topology, but may however have had an impact. # E.g., a branch merged between bads and goods, but whose branch- # point is out-side of the range. iba = '::bisect(bad) - ::bisect(good)' # Ignored bads' ancestors iga = '::bisect(good) - ::bisect(bad)' # Ignored goods' ancestors ignored = '( ( (%s) | (%s) ) - (%s) )' % (iba, iga, range) if status == 'range': return repo.revs(range) elif status == 'pruned': return repo.revs(pruned) elif status == 'untested': return repo.revs(untested) elif status == 'ignored': return repo.revs(ignored) elif status == "goods": return repo.revs(goods) elif status == "bads": return repo.revs(bads) else: raise error.ParseError(_('invalid bisect state')) def label(repo, node): rev = repo.changelog.rev(node) # Try explicit sets if rev in get(repo, 'good'): # i18n: bisect changeset status return _('good') if rev in get(repo, 'bad'): # i18n: bisect changeset status return _('bad') if rev in get(repo, 'skip'): # i18n: bisect changeset status return _('skipped') if rev in get(repo, 'untested') or rev in get(repo, 'current'): # i18n: bisect changeset status return _('untested') if rev in get(repo, 'ignored'): # i18n: bisect changeset status return _('ignored') # Try implicit sets if rev in get(repo, 'goods'): # i18n: bisect changeset status return _('good (implicit)') if rev in get(repo, 'bads'): # i18n: bisect changeset status return _('bad (implicit)') return None def printresult(ui, repo, state, displayer, nodes, good): if len(nodes) == 1: # narrowed it down to a single revision if good: ui.write(_("The first good revision is:\n")) else: ui.write(_("The first bad revision is:\n")) displayer.show(repo[nodes[0]]) extendnode = extendrange(repo, state, nodes, good) if extendnode is not None: ui.write(_('Not all ancestors of this changeset have been' ' checked.\nUse bisect --extend to continue the ' 'bisection from\nthe common ancestor, %s.\n') % extendnode) else: # multiple possible revisions if good: ui.write(_("Due to skipped revisions, the first " "good revision could be any of:\n")) else: ui.write(_("Due to skipped revisions, the first " "bad revision could be any of:\n")) for n in nodes: displayer.show(repo[n]) displayer.close()