tests/test-convert-svn-source.t

hgwebdir: avoid redundant repo and directory entries when 'web.name' is set

Previously, when 'web.name' was set on a subrepo parent and 'web.collapse=True',
the parent repo would show in the list with the configured 'web.name', and a
directory with the parent repo's filesystem name (with a trailing slash) would
also appear.  The subrepo(s) would unexpectedly be excluded from the list of
repositories.  Clicking the directory entry would go right to the repo page.

Now both the parent and the subrepos show up, without the additional directory
entry.

The configured hgweb paths used '**' for finding the repos in this scenario.


A couple of notes about the tests:

- The area where the subrepo was added has a comment that it tests subrepos,
  though none previously existed there.  One now does.

- The 'web.descend' option is required for collapse to work.  I'm not sure what
  the previous expectations were for the test.  Nothing changed with it set,
  prior to adding the code in this patch.  It is however required for this test.

- The only output changes are for the hyperlinks, obviously because of the
  'web.name' parameter.

- Without this code change, there would be an additional diff:

    --- /usr/local/mercurial/tests/test-hgwebdir.t
    +++ /usr/local/mercurial/tests/test-hgwebdir.t.err
    @@ -951,7 +951,7 @@
       /rcoll/notrepo/e/
       /rcoll/notrepo/e/e2/
       /rcoll/notrepo/f/
    -  /rcoll/notrepo/f/f2/
    +  /rcoll/notrepo/f/


     Test repositories inside intermediate directories

I'm not sure why the fancy name doesn't come out, but it is enough to
demonstrate that the parent is not listed redundantly, and the subrepo isn't
skipped.

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > [convert]
  > svn.trunk = mytrunk
  > EOF

  $ svnadmin create svn-repo
  $ SVNREPOPATH=`pwd`/svn-repo
#if windows
  $ SVNREPOURL=file:///`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
  $ SVNREPOURL=file://`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif
  $ INVALIDREVISIONID=svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1
  $ VALIDREVISIONID=svn:a2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk/mytrunk@1

Now test that it works with trunk/tags layout, but no branches yet.

Initial svn import

  $ mkdir projB
  $ cd projB
  $ mkdir mytrunk
  $ mkdir tags
  $ cd ..

  $ svn import -m "init projB" projB "$SVNREPOURL/proj%20B" | sort
  
  Adding         projB/mytrunk (glob)
  Adding         projB/tags (glob)
  Committed revision 1.

Update svn repository

  $ svn co "$SVNREPOURL/proj%20B/mytrunk" B
  Checked out revision 1.
  $ cd B
  $ echo hello > 'letter .txt'
  $ svn add 'letter .txt'
  A         letter .txt
  $ svn ci -m hello
  Adding         letter .txt
  Transmitting file data .
  Committed revision 2.

  $ "$TESTDIR/svn-safe-append.py" world 'letter .txt'
  $ svn ci -m world
  Sending        letter .txt
  Transmitting file data .
  Committed revision 3.

  $ svn copy -m "tag v0.1" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.1"
  
  Committed revision 4.

  $ "$TESTDIR/svn-safe-append.py" 'nice day today!' 'letter .txt'
  $ svn ci -m "nice day"
  Sending        letter .txt
  Transmitting file data .
  Committed revision 5.
  $ cd ..

Convert to hg once and also test localtimezone option

NOTE: This doesn't check all time zones -- it merely determines that
the configuration option is taking effect.

An arbitrary (U.S.) time zone is used here.  TZ=US/Hawaii is selected
since it does not use DST (unlike other U.S. time zones) and is always
a fixed difference from UTC.

  $ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
  initializing destination B-hg repository
  scanning source...
  sorting...
  converting...
  3 init projB
  2 hello
  1 world
  0 nice day
  updating tags

Update svn repository again

  $ cd B
  $ "$TESTDIR/svn-safe-append.py" "see second letter" 'letter .txt'
  $ echo "nice to meet you" > letter2.txt
  $ svn add letter2.txt
  A         letter2.txt
  $ svn ci -m "second letter"
  Sending        letter .txt
  Adding         letter2.txt
  Transmitting file data ..
  Committed revision 6.

  $ svn copy -m "tag v0.2" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.2"
  
  Committed revision 7.

  $ "$TESTDIR/svn-safe-append.py" "blah-blah-blah" letter2.txt
  $ svn ci -m "work in progress"
  Sending        letter2.txt
  Transmitting file data .
  Committed revision 8.
  $ cd ..

  $ hg convert -s svn "$SVNREPOURL/proj%20B/non-existent-path" dest
  initializing destination dest repository
  abort: no revision found in module /proj B/non-existent-path
  [255]

########################################

Test incremental conversion

  $ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
  scanning source...
  sorting...
  converting...
  1 second letter
  0 work in progress
  updating tags

  $ cd B-hg
  $ hg log -G --template '{rev} {desc|firstline} date: {date|date} files: {files}\n'
  o  7 update tags date: * +0000 files: .hgtags (glob)
  |
  o  6 work in progress date: * -1000 files: letter2.txt (glob)
  |
  o  5 second letter date: * -1000 files: letter .txt letter2.txt (glob)
  |
  o  4 update tags date: * +0000 files: .hgtags (glob)
  |
  o  3 nice day date: * -1000 files: letter .txt (glob)
  |
  o  2 world date: * -1000 files: letter .txt (glob)
  |
  o  1 hello date: * -1000 files: letter .txt (glob)
  |
  o  0 init projB date: * -1000 files: (glob)
  
  $ hg tags -q
  tip
  v0.2
  v0.1
  $ cd ..

Test filemap
  $ echo 'include letter2.txt' > filemap
  $ hg convert --filemap filemap "$SVNREPOURL/proj%20B/mytrunk" fmap
  initializing destination fmap repository
  scanning source...
  sorting...
  converting...
  5 init projB
  4 hello
  3 world
  2 nice day
  1 second letter
  0 work in progress
  $ hg -R fmap branch -q
  default
  $ hg log -G -R fmap --template '{rev} {desc|firstline} files: {files}\n'
  o  1 work in progress files: letter2.txt
  |
  o  0 second letter files: letter2.txt
  
Convert with --full adds and removes files that didn't change

  $ cd B
  $ echo >> "letter .txt"
  $ svn ci -m 'nothing'
  Sending        letter .txt
  Transmitting file data .
  Committed revision 9.
  $ cd ..

  $ echo 'rename letter2.txt letter3.txt' > filemap
  $ hg convert --filemap filemap --full "$SVNREPOURL/proj%20B/mytrunk" fmap
  scanning source...
  sorting...
  converting...
  0 nothing
  $ hg -R fmap st --change tip
  A letter .txt
  A letter3.txt
  R letter2.txt

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $INVALIDREVISIONID $VALIDREVISIONID
  > EOF
  $ hg convert --splicemap splicemap "$SVNREPOURL/proj%20B/mytrunk" smap
  initializing destination smap repository
  abort: splicemap entry svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1 is not a valid revision identifier
  [255]

Test stop revision
  $ hg convert --rev 1 "$SVNREPOURL/proj%20B/mytrunk" stoprev
  initializing destination stoprev repository
  scanning source...
  sorting...
  converting...
  0 init projB
  $ hg -R stoprev branch -q
  default

Check convert_revision extra-records.
This is also the only place testing more than one extra field in a revision.

  $ cd stoprev
  $ hg tip --debug | grep extra
  extra:       branch=default
  extra:       convert_revision=svn:........-....-....-....-............/proj B/mytrunk@1 (re)
  $ cd ..

Test converting empty heads (issue3347).
Also tests getting logs directly without debugsvnlog.

  $ svnadmin create svn-empty
  $ svnadmin load -q svn-empty < "$TESTDIR/svn/empty.svndump"
  $ hg --config convert.svn.trunk= --config convert.svn.debugsvnlog=0 convert svn-empty
  assuming destination svn-empty-hg
  initializing destination svn-empty-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir
  $ hg --config convert.svn.trunk= convert "$SVNREPOURL/../svn-empty/trunk"
  assuming destination trunk-hg
  initializing destination trunk-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir

Test that a too-new repository format is properly rejected:
  $ mv svn-empty/format format
  $ echo 999 > svn-empty/format
It's important that this command explicitly specify svn, otherwise it
can have surprising side effects (like falling back to a perforce
depot that can be seen from the test environment and slurping from that.)
  $ hg convert --source-type svn svn-empty this-will-fail
  initializing destination this-will-fail repository
  file:/*/$TESTTMP/svn-empty does not look like a Subversion repository to libsvn version 1.*.* (glob)
  abort: svn-empty: missing or unsupported repository
  [255]
  $ mv format svn-empty/format