hgwebdir: avoid redundant repo and directory entries when 'web.name' is set
Previously, when 'web.name' was set on a subrepo parent and 'web.collapse=True',
the parent repo would show in the list with the configured 'web.name', and a
directory with the parent repo's filesystem name (with a trailing slash) would
also appear. The subrepo(s) would unexpectedly be excluded from the list of
repositories. Clicking the directory entry would go right to the repo page.
Now both the parent and the subrepos show up, without the additional directory
entry.
The configured hgweb paths used '**' for finding the repos in this scenario.
A couple of notes about the tests:
- The area where the subrepo was added has a comment that it tests subrepos,
though none previously existed there. One now does.
- The 'web.descend' option is required for collapse to work. I'm not sure what
the previous expectations were for the test. Nothing changed with it set,
prior to adding the code in this patch. It is however required for this test.
- The only output changes are for the hyperlinks, obviously because of the
'web.name' parameter.
- Without this code change, there would be an additional diff:
--- /usr/local/mercurial/tests/test-hgwebdir.t
+++ /usr/local/mercurial/tests/test-hgwebdir.t.err
@@ -951,7 +951,7 @@
/rcoll/notrepo/e/
/rcoll/notrepo/e/e2/
/rcoll/notrepo/f/
- /rcoll/notrepo/f/f2/
+ /rcoll/notrepo/f/
Test repositories inside intermediate directories
I'm not sure why the fancy name doesn't come out, but it is enough to
demonstrate that the parent is not listed redundantly, and the subrepo isn't
skipped.
"""This unit test primarily tests parsers.parse_index2().
It also checks certain aspects of the parsers module as a whole.
"""
from mercurial import parsers
from mercurial.node import nullid, nullrev
import struct
import subprocess
import sys
# original python implementation
def gettype(q):
return int(q & 0xFFFF)
def offset_type(offset, type):
return long(long(offset) << 16 | type)
indexformatng = ">Qiiiiii20s12x"
def py_parseindex(data, inline) :
s = 64
cache = None
index = []
nodemap = {nullid: nullrev}
n = off = 0
l = len(data) - s
append = index.append
if inline:
cache = (0, data)
while off <= l:
e = struct.unpack(indexformatng, data[off:off + s])
nodemap[e[7]] = n
append(e)
n += 1
if e[1] < 0:
break
off += e[1] + s
else:
while off <= l:
e = struct.unpack(indexformatng, data[off:off + s])
nodemap[e[7]] = n
append(e)
n += 1
off += s
e = list(index[0])
type = gettype(e[0])
e[0] = offset_type(0, type)
index[0] = tuple(e)
# add the magic null revision at -1
index.append((0, 0, 0, -1, -1, -1, -1, nullid))
return index, cache
data_inlined = '\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x01\x8c' \
'\x00\x00\x04\x07\x00\x00\x00\x00\x00\x00\x15\x15\xff\xff\xff' \
'\xff\xff\xff\xff\xff\xebG\x97\xb7\x1fB\x04\xcf\x13V\x81\tw\x1b' \
'w\xdduR\xda\xc6\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
'x\x9c\x9d\x93?O\xc30\x10\xc5\xf7|\x8a\xdb\x9a\xa8m\x06\xd8*\x95' \
'\x81B\xa1\xa2\xa2R\xcb\x86Pd\x9a\x0b5$vd_\x04\xfd\xf6\x9c\xff@' \
'\x11!\x0b\xd9\xec\xf7\xbbw\xe7gG6\xad6\x04\xdaN\xc0\x92\xa0$)' \
'\xb1\x82\xa2\xd1%\x16\xa4\x8b7\xa9\xca\xd4-\xb2Y\x02\xfc\xc9' \
'\xcaS\xf9\xaeX\xed\xb6\xd77Q\x02\x83\xd4\x19\xf5--Y\xea\xe1W' \
'\xab\xed\x10\xceR\x0f_\xdf\xdf\r\xe1,\xf5\xf0\xcb\xf5 \xceR\x0f' \
'_\xdc\x0e\x0e\xc3R\x0f_\xae\x96\x9b!\x9e\xa5\x1e\xbf\xdb,\x06' \
'\xc7q\x9a/\x88\x82\xc3B\xea\xb5\xb4TJ\x93\xb6\x82\x0e\xe16\xe6' \
'KQ\xdb\xaf\xecG\xa3\xd1 \x01\xd3\x0b_^\xe8\xaa\xa0\xae\xad\xd1' \
'&\xbef\x1bz\x08\xb0|\xc9Xz\x06\xf6Z\x91\x90J\xaa\x17\x90\xaa' \
'\xd2\xa6\x11$5C\xcf\xba#\xa0\x03\x02*2\x92-\xfc\xb1\x94\xdf\xe2' \
'\xae\xb8\'m\x8ey0^\x85\xd3\x82\xb4\xf0`:\x9c\x00\x8a\xfd\x01' \
'\xb0\xc6\x86\x8b\xdd\xae\x80\xf3\xa9\x9fd\x16\n\x00R%\x1a\x06' \
'\xe9\xd8b\x98\x1d\xf4\xf3+\x9bf\x01\xd8p\x1b\xf3.\xed\x9f^g\xc3' \
'^\xd9W81T\xdb\xd5\x04sx|\xf2\xeb\xd6`%?x\xed"\x831\xbf\xf3\xdc' \
'b\xeb%gaY\xe1\xad\x9f\xb9f\'1w\xa9\xa5a\x83s\x82J\xb98\xbc4\x8b' \
'\x83\x00\x9f$z\xb8#\xa5\xb1\xdf\x98\xd9\xec\x1b\x89O\xe3Ts\x9a4' \
'\x17m\x8b\xfc\x8f\xa5\x95\x9a\xfc\xfa\xed,\xe5|\xa1\xfe\x15\xb9' \
'\xbc\xb2\x93\x1f\xf2\x95\xff\xdf,\x1a\xc5\xe7\x17*\x93Oz:>\x0e'
data_non_inlined = '\x00\x00\x00\x01\x00\x00\x00\x00\x00\x01D\x19' \
'\x00\x07e\x12\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff' \
'\xff\xff\xff\xff\xd1\xf4\xbb\xb0\xbe\xfc\x13\xbd\x8c\xd3\x9d' \
'\x0f\xcd\xd9;\x8c\x07\x8cJ/\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
'\x00\x00\x00\x00\x00\x00\x01D\x19\x00\x00\x00\x00\x00\xdf\x00' \
'\x00\x01q\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff' \
'\xff\xff\xff\xc1\x12\xb9\x04\x96\xa4Z1t\x91\xdfsJ\x90\xf0\x9bh' \
'\x07l&\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
'\x00\x01D\xf8\x00\x00\x00\x00\x01\x1b\x00\x00\x01\xb8\x00\x00' \
'\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\x02\n' \
'\x0e\xc6&\xa1\x92\xae6\x0b\x02i\xfe-\xe5\xbao\x05\xd1\xe7\x00' \
'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01F' \
'\x13\x00\x00\x00\x00\x01\xec\x00\x00\x03\x06\x00\x00\x00\x01' \
'\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x12\xcb\xeby1' \
'\xb6\r\x98B\xcb\x07\xbd`\x8f\x92\xd9\xc4\x84\xbdK\x00\x00\x00' \
'\x00\x00\x00\x00\x00\x00\x00\x00\x00'
def parse_index2(data, inline):
index, chunkcache = parsers.parse_index2(data, inline)
return list(index), chunkcache
def importparsers(hexversion):
"""Import mercurial.parsers with the given sys.hexversion."""
# The file parsers.c inspects sys.hexversion to determine the version
# of the currently-running Python interpreter, so we monkey-patch
# sys.hexversion to simulate using different versions.
code = ("import sys; sys.hexversion=%s; "
"import mercurial.parsers" % hexversion)
cmd = "python -c \"%s\"" % code
# We need to do these tests inside a subprocess because parser.c's
# version-checking code happens inside the module init function, and
# when using reload() to reimport an extension module, "The init function
# of extension modules is not called a second time"
# (from http://docs.python.org/2/library/functions.html?#reload).
p = subprocess.Popen(cmd, shell=True,
stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
return p.communicate() # returns stdout, stderr
def printhexfail(testnumber, hexversion, stdout, expected):
try:
hexstring = hex(hexversion)
except TypeError:
hexstring = None
print ("FAILED: version test #%s with Python %s and patched "
"sys.hexversion %r (%r):\n Expected %s but got:\n-->'%s'\n" %
(testnumber, sys.version_info, hexversion, hexstring, expected,
stdout))
def testversionokay(testnumber, hexversion):
stdout, stderr = importparsers(hexversion)
if stdout:
printhexfail(testnumber, hexversion, stdout, expected="no stdout")
def testversionfail(testnumber, hexversion):
stdout, stderr = importparsers(hexversion)
# We include versionerrortext to distinguish from other ImportErrors.
errtext = "ImportError: %s" % parsers.versionerrortext
if errtext not in stdout:
printhexfail(testnumber, hexversion, stdout,
expected="stdout to contain %r" % errtext)
def makehex(major, minor, micro):
return int("%x%02x%02x00" % (major, minor, micro), 16)
def runversiontests():
"""Check the version-detection logic when importing parsers."""
info = sys.version_info
major, minor, micro = info[0], info[1], info[2]
# Test same major-minor versions.
testversionokay(1, makehex(major, minor, micro))
testversionokay(2, makehex(major, minor, micro + 1))
# Test different major-minor versions.
testversionfail(3, makehex(major + 1, minor, micro))
testversionfail(4, makehex(major, minor + 1, micro))
testversionfail(5, "'foo'")
def runtest() :
# Only test the version-detection logic if it is present.
try:
parsers.versionerrortext
except AttributeError:
pass
else:
runversiontests()
# Check that parse_index2() raises TypeError on bad arguments.
try:
parse_index2(0, True)
except TypeError:
pass
else:
print "Expected to get TypeError."
# Check parsers.parse_index2() on an index file against the original
# Python implementation of parseindex, both with and without inlined data.
py_res_1 = py_parseindex(data_inlined, True)
c_res_1 = parse_index2(data_inlined, True)
py_res_2 = py_parseindex(data_non_inlined, False)
c_res_2 = parse_index2(data_non_inlined, False)
if py_res_1 != c_res_1:
print "Parse index result (with inlined data) differs!"
if py_res_2 != c_res_2:
print "Parse index result (no inlined data) differs!"
ix = parsers.parse_index2(data_inlined, True)[0]
for i, r in enumerate(ix):
if r[7] == nullid:
i = -1
try:
if ix[r[7]] != i:
print 'Reverse lookup inconsistent for %r' % r[7].encode('hex')
except TypeError:
# pure version doesn't support this
break
print "done"
runtest()