histedit: fix indent
The duplicatecopies call should be part of the rebase block.
# histedit.py - interactive history editing for mercurial
#
# Copyright 2009 Augie Fackler <raf@durin42.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""interactive history editing
With this extension installed, Mercurial gains one new command: histedit. Usage
is as follows, assuming the following history::
@ 3[tip] 7c2fd3b9020c 2009-04-27 18:04 -0500 durin42
| Add delta
|
o 2 030b686bedc4 2009-04-27 18:04 -0500 durin42
| Add gamma
|
o 1 c561b4e977df 2009-04-27 18:04 -0500 durin42
| Add beta
|
o 0 d8d2fcd0e319 2009-04-27 18:04 -0500 durin42
Add alpha
If you were to run ``hg histedit c561b4e977df``, you would see the following
file open in your editor::
pick c561b4e977df Add beta
pick 030b686bedc4 Add gamma
pick 7c2fd3b9020c Add delta
# Edit history between c561b4e977df and 7c2fd3b9020c
#
# Commits are listed from least to most recent
#
# Commands:
# p, pick = use commit
# e, edit = use commit, but stop for amending
# f, fold = use commit, but combine it with the one above
# r, roll = like fold, but discard this commit's description
# d, drop = remove commit from history
# m, mess = edit message without changing commit content
#
In this file, lines beginning with ``#`` are ignored. You must specify a rule
for each revision in your history. For example, if you had meant to add gamma
before beta, and then wanted to add delta in the same revision as beta, you
would reorganize the file to look like this::
pick 030b686bedc4 Add gamma
pick c561b4e977df Add beta
fold 7c2fd3b9020c Add delta
# Edit history between c561b4e977df and 7c2fd3b9020c
#
# Commits are listed from least to most recent
#
# Commands:
# p, pick = use commit
# e, edit = use commit, but stop for amending
# f, fold = use commit, but combine it with the one above
# r, roll = like fold, but discard this commit's description
# d, drop = remove commit from history
# m, mess = edit message without changing commit content
#
At which point you close the editor and ``histedit`` starts working. When you
specify a ``fold`` operation, ``histedit`` will open an editor when it folds
those revisions together, offering you a chance to clean up the commit message::
Add beta
***
Add delta
Edit the commit message to your liking, then close the editor. For
this example, let's assume that the commit message was changed to
``Add beta and delta.`` After histedit has run and had a chance to
remove any old or temporary revisions it needed, the history looks
like this::
@ 2[tip] 989b4d060121 2009-04-27 18:04 -0500 durin42
| Add beta and delta.
|
o 1 081603921c3f 2009-04-27 18:04 -0500 durin42
| Add gamma
|
o 0 d8d2fcd0e319 2009-04-27 18:04 -0500 durin42
Add alpha
Note that ``histedit`` does *not* remove any revisions (even its own temporary
ones) until after it has completed all the editing operations, so it will
probably perform several strip operations when it's done. For the above example,
it had to run strip twice. Strip can be slow depending on a variety of factors,
so you might need to be a little patient. You can choose to keep the original
revisions by passing the ``--keep`` flag.
The ``edit`` operation will drop you back to a command prompt,
allowing you to edit files freely, or even use ``hg record`` to commit
some changes as a separate commit. When you're done, any remaining
uncommitted changes will be committed as well. When done, run ``hg
histedit --continue`` to finish this step. You'll be prompted for a
new commit message, but the default commit message will be the
original message for the ``edit`` ed revision.
The ``message`` operation will give you a chance to revise a commit
message without changing the contents. It's a shortcut for doing
``edit`` immediately followed by `hg histedit --continue``.
If ``histedit`` encounters a conflict when moving a revision (while
handling ``pick`` or ``fold``), it'll stop in a similar manner to
``edit`` with the difference that it won't prompt you for a commit
message when done. If you decide at this point that you don't like how
much work it will be to rearrange history, or that you made a mistake,
you can use ``hg histedit --abort`` to abandon the new changes you
have made and return to the state before you attempted to edit your
history.
If we clone the histedit-ed example repository above and add four more
changes, such that we have the following history::
@ 6[tip] 038383181893 2009-04-27 18:04 -0500 stefan
| Add theta
|
o 5 140988835471 2009-04-27 18:04 -0500 stefan
| Add eta
|
o 4 122930637314 2009-04-27 18:04 -0500 stefan
| Add zeta
|
o 3 836302820282 2009-04-27 18:04 -0500 stefan
| Add epsilon
|
o 2 989b4d060121 2009-04-27 18:04 -0500 durin42
| Add beta and delta.
|
o 1 081603921c3f 2009-04-27 18:04 -0500 durin42
| Add gamma
|
o 0 d8d2fcd0e319 2009-04-27 18:04 -0500 durin42
Add alpha
If you run ``hg histedit --outgoing`` on the clone then it is the same
as running ``hg histedit 836302820282``. If you need plan to push to a
repository that Mercurial does not detect to be related to the source
repo, you can add a ``--force`` option.
"""
try:
import cPickle as pickle
pickle.dump # import now
except ImportError:
import pickle
import errno
import os
import sys
from mercurial import cmdutil
from mercurial import discovery
from mercurial import error
from mercurial import copies
from mercurial import context
from mercurial import hg
from mercurial import node
from mercurial import repair
from mercurial import scmutil
from mercurial import util
from mercurial import obsolete
from mercurial import merge as mergemod
from mercurial.lock import release
from mercurial.i18n import _
cmdtable = {}
command = cmdutil.command(cmdtable)
testedwith = 'internal'
# i18n: command names and abbreviations must remain untranslated
editcomment = _("""# Edit history between %s and %s
#
# Commits are listed from least to most recent
#
# Commands:
# p, pick = use commit
# e, edit = use commit, but stop for amending
# f, fold = use commit, but combine it with the one above
# r, roll = like fold, but discard this commit's description
# d, drop = remove commit from history
# m, mess = edit message without changing commit content
#
""")
def commitfuncfor(repo, src):
"""Build a commit function for the replacement of <src>
This function ensure we apply the same treatment to all changesets.
- Add a 'histedit_source' entry in extra.
Note that fold have its own separated logic because its handling is a bit
different and not easily factored out of the fold method.
"""
phasemin = src.phase()
def commitfunc(**kwargs):
phasebackup = repo.ui.backupconfig('phases', 'new-commit')
try:
repo.ui.setconfig('phases', 'new-commit', phasemin,
'histedit')
extra = kwargs.get('extra', {}).copy()
extra['histedit_source'] = src.hex()
kwargs['extra'] = extra
return repo.commit(**kwargs)
finally:
repo.ui.restoreconfig(phasebackup)
return commitfunc
def applychanges(ui, repo, ctx, opts):
"""Merge changeset from ctx (only) in the current working directory"""
wcpar = repo.dirstate.parents()[0]
if ctx.p1().node() == wcpar:
# edition ar "in place" we do not need to make any merge,
# just applies changes on parent for edition
cmdutil.revert(ui, repo, ctx, (wcpar, node.nullid), all=True)
stats = None
else:
repo.dirstate.beginparentchange()
try:
# ui.forcemerge is an internal variable, do not document
repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
'histedit')
stats = mergemod.update(repo, ctx.node(), True, True, False,
ctx.p1().node())
finally:
repo.ui.setconfig('ui', 'forcemerge', '', 'histedit')
repo.setparents(wcpar, node.nullid)
repo.dirstate.endparentchange()
repo.dirstate.write()
# fix up dirstate for copies and renames
cmdutil.duplicatecopies(repo, ctx.rev(), ctx.p1().rev())
return stats
def collapse(repo, first, last, commitopts):
"""collapse the set of revisions from first to last as new one.
Expected commit options are:
- message
- date
- username
Commit message is edited in all cases.
This function works in memory."""
ctxs = list(repo.set('%d::%d', first, last))
if not ctxs:
return None
base = first.parents()[0]
# commit a new version of the old changeset, including the update
# collect all files which might be affected
files = set()
for ctx in ctxs:
files.update(ctx.files())
# Recompute copies (avoid recording a -> b -> a)
copied = copies.pathcopies(base, last)
# prune files which were reverted by the updates
def samefile(f):
if f in last.manifest():
a = last.filectx(f)
if f in base.manifest():
b = base.filectx(f)
return (a.data() == b.data()
and a.flags() == b.flags())
else:
return False
else:
return f not in base.manifest()
files = [f for f in files if not samefile(f)]
# commit version of these files as defined by head
headmf = last.manifest()
def filectxfn(repo, ctx, path):
if path in headmf:
fctx = last[path]
flags = fctx.flags()
mctx = context.memfilectx(repo,
fctx.path(), fctx.data(),
islink='l' in flags,
isexec='x' in flags,
copied=copied.get(path))
return mctx
return None
if commitopts.get('message'):
message = commitopts['message']
else:
message = first.description()
user = commitopts.get('user')
date = commitopts.get('date')
extra = commitopts.get('extra')
parents = (first.p1().node(), first.p2().node())
editor = None
if not commitopts.get('rollup'):
editor = cmdutil.getcommiteditor(edit=True, editform='histedit.fold')
new = context.memctx(repo,
parents=parents,
text=message,
files=files,
filectxfn=filectxfn,
user=user,
date=date,
extra=extra,
editor=editor)
return repo.commitctx(new)
def pick(ui, repo, ctx, ha, opts):
oldctx = repo[ha]
if oldctx.parents()[0] == ctx:
ui.debug('node %s unchanged\n' % ha)
return oldctx, []
hg.update(repo, ctx.node())
stats = applychanges(ui, repo, oldctx, opts)
if stats and stats[3] > 0:
raise error.InterventionRequired(_('Fix up the change and run '
'hg histedit --continue'))
# drop the second merge parent
commit = commitfuncfor(repo, oldctx)
n = commit(text=oldctx.description(), user=oldctx.user(),
date=oldctx.date(), extra=oldctx.extra())
if n is None:
ui.warn(_('%s: empty changeset\n')
% node.hex(ha))
return ctx, []
new = repo[n]
return new, [(oldctx.node(), (n,))]
def edit(ui, repo, ctx, ha, opts):
oldctx = repo[ha]
hg.update(repo, ctx.node())
applychanges(ui, repo, oldctx, opts)
raise error.InterventionRequired(
_('Make changes as needed, you may commit or record as needed now.\n'
'When you are finished, run hg histedit --continue to resume.'))
def rollup(ui, repo, ctx, ha, opts):
rollupopts = opts.copy()
rollupopts['rollup'] = True
return fold(ui, repo, ctx, ha, rollupopts)
def fold(ui, repo, ctx, ha, opts):
oldctx = repo[ha]
hg.update(repo, ctx.node())
stats = applychanges(ui, repo, oldctx, opts)
if stats and stats[3] > 0:
raise error.InterventionRequired(
_('Fix up the change and run hg histedit --continue'))
n = repo.commit(text='fold-temp-revision %s' % ha, user=oldctx.user(),
date=oldctx.date(), extra=oldctx.extra())
if n is None:
ui.warn(_('%s: empty changeset')
% node.hex(ha))
return ctx, []
return finishfold(ui, repo, ctx, oldctx, n, opts, [])
def finishfold(ui, repo, ctx, oldctx, newnode, opts, internalchanges):
parent = ctx.parents()[0].node()
hg.update(repo, parent)
### prepare new commit data
commitopts = opts.copy()
commitopts['user'] = ctx.user()
# commit message
if opts.get('rollup'):
newmessage = ctx.description()
else:
newmessage = '\n***\n'.join(
[ctx.description()] +
[repo[r].description() for r in internalchanges] +
[oldctx.description()]) + '\n'
commitopts['message'] = newmessage
# date
commitopts['date'] = max(ctx.date(), oldctx.date())
extra = ctx.extra().copy()
# histedit_source
# note: ctx is likely a temporary commit but that the best we can do here
# This is sufficient to solve issue3681 anyway
extra['histedit_source'] = '%s,%s' % (ctx.hex(), oldctx.hex())
commitopts['extra'] = extra
phasebackup = repo.ui.backupconfig('phases', 'new-commit')
try:
phasemin = max(ctx.phase(), oldctx.phase())
repo.ui.setconfig('phases', 'new-commit', phasemin, 'histedit')
n = collapse(repo, ctx, repo[newnode], commitopts)
finally:
repo.ui.restoreconfig(phasebackup)
if n is None:
return ctx, []
hg.update(repo, n)
replacements = [(oldctx.node(), (newnode,)),
(ctx.node(), (n,)),
(newnode, (n,)),
]
for ich in internalchanges:
replacements.append((ich, (n,)))
return repo[n], replacements
def drop(ui, repo, ctx, ha, opts):
return ctx, [(repo[ha].node(), ())]
def message(ui, repo, ctx, ha, opts):
oldctx = repo[ha]
hg.update(repo, ctx.node())
stats = applychanges(ui, repo, oldctx, opts)
if stats and stats[3] > 0:
raise error.InterventionRequired(
_('Fix up the change and run hg histedit --continue'))
message = oldctx.description()
commit = commitfuncfor(repo, oldctx)
editor = cmdutil.getcommiteditor(edit=True, editform='histedit.mess')
new = commit(text=message, user=oldctx.user(), date=oldctx.date(),
extra=oldctx.extra(),
editor=editor)
newctx = repo[new]
if oldctx.node() != newctx.node():
return newctx, [(oldctx.node(), (new,))]
# We didn't make an edit, so just indicate no replaced nodes
return newctx, []
def findoutgoing(ui, repo, remote=None, force=False, opts={}):
"""utility function to find the first outgoing changeset
Used by initialisation code"""
dest = ui.expandpath(remote or 'default-push', remote or 'default')
dest, revs = hg.parseurl(dest, None)[:2]
ui.status(_('comparing with %s\n') % util.hidepassword(dest))
revs, checkout = hg.addbranchrevs(repo, repo, revs, None)
other = hg.peer(repo, opts, dest)
if revs:
revs = [repo.lookup(rev) for rev in revs]
outgoing = discovery.findcommonoutgoing(repo, other, revs, force=force)
if not outgoing.missing:
raise util.Abort(_('no outgoing ancestors'))
roots = list(repo.revs("roots(%ln)", outgoing.missing))
if 1 < len(roots):
msg = _('there are ambiguous outgoing revisions')
hint = _('see "hg help histedit" for more detail')
raise util.Abort(msg, hint=hint)
return repo.lookup(roots[0])
actiontable = {'p': pick,
'pick': pick,
'e': edit,
'edit': edit,
'f': fold,
'fold': fold,
'r': rollup,
'roll': rollup,
'd': drop,
'drop': drop,
'm': message,
'mess': message,
}
@command('histedit',
[('', 'commands', '',
_('Read history edits from the specified file.')),
('c', 'continue', False, _('continue an edit already in progress')),
('k', 'keep', False,
_("don't strip old nodes after edit is complete")),
('', 'abort', False, _('abort an edit in progress')),
('o', 'outgoing', False, _('changesets not found in destination')),
('f', 'force', False,
_('force outgoing even for unrelated repositories')),
('r', 'rev', [], _('first revision to be edited'))],
_("ANCESTOR | --outgoing [URL]"))
def histedit(ui, repo, *freeargs, **opts):
"""interactively edit changeset history
This command edits changesets between ANCESTOR and the parent of
the working directory.
With --outgoing, this edits changesets not found in the
destination repository. If URL of the destination is omitted, the
'default-push' (or 'default') path will be used.
For safety, this command is aborted, also if there are ambiguous
outgoing revisions which may confuse users: for example, there are
multiple branches containing outgoing revisions.
Use "min(outgoing() and ::.)" or similar revset specification
instead of --outgoing to specify edit target revision exactly in
such ambiguous situation. See :hg:`help revsets` for detail about
selecting revisions.
Returns 0 on success, 1 if user intervention is required (not only
for intentional "edit" command, but also for resolving unexpected
conflicts).
"""
lock = wlock = None
try:
wlock = repo.wlock()
lock = repo.lock()
_histedit(ui, repo, *freeargs, **opts)
finally:
release(lock, wlock)
def _histedit(ui, repo, *freeargs, **opts):
# TODO only abort if we try and histedit mq patches, not just
# blanket if mq patches are applied somewhere
mq = getattr(repo, 'mq', None)
if mq and mq.applied:
raise util.Abort(_('source has mq patches applied'))
# basic argument incompatibility processing
outg = opts.get('outgoing')
cont = opts.get('continue')
abort = opts.get('abort')
force = opts.get('force')
rules = opts.get('commands', '')
revs = opts.get('rev', [])
goal = 'new' # This invocation goal, in new, continue, abort
if force and not outg:
raise util.Abort(_('--force only allowed with --outgoing'))
if cont:
if util.any((outg, abort, revs, freeargs, rules)):
raise util.Abort(_('no arguments allowed with --continue'))
goal = 'continue'
elif abort:
if util.any((outg, revs, freeargs, rules)):
raise util.Abort(_('no arguments allowed with --abort'))
goal = 'abort'
else:
if os.path.exists(os.path.join(repo.path, 'histedit-state')):
raise util.Abort(_('history edit already in progress, try '
'--continue or --abort'))
if outg:
if revs:
raise util.Abort(_('no revisions allowed with --outgoing'))
if len(freeargs) > 1:
raise util.Abort(
_('only one repo argument allowed with --outgoing'))
else:
revs.extend(freeargs)
if len(revs) != 1:
raise util.Abort(
_('histedit requires exactly one ancestor revision'))
if goal == 'continue':
(parentctxnode, rules, keep, topmost, replacements) = readstate(repo)
parentctx = repo[parentctxnode]
parentctx, repl = bootstrapcontinue(ui, repo, parentctx, rules, opts)
replacements.extend(repl)
elif goal == 'abort':
(parentctxnode, rules, keep, topmost, replacements) = readstate(repo)
mapping, tmpnodes, leafs, _ntm = processreplacement(repo, replacements)
ui.debug('restore wc to old parent %s\n' % node.short(topmost))
# check whether we should update away
parentnodes = [c.node() for c in repo[None].parents()]
for n in leafs | set([parentctxnode]):
if n in parentnodes:
hg.clean(repo, topmost)
break
else:
pass
cleanupnode(ui, repo, 'created', tmpnodes)
cleanupnode(ui, repo, 'temp', leafs)
os.unlink(os.path.join(repo.path, 'histedit-state'))
return
else:
cmdutil.checkunfinished(repo)
cmdutil.bailifchanged(repo)
topmost, empty = repo.dirstate.parents()
if outg:
if freeargs:
remote = freeargs[0]
else:
remote = None
root = findoutgoing(ui, repo, remote, force, opts)
else:
rr = list(repo.set('roots(%ld)', scmutil.revrange(repo, revs)))
if len(rr) != 1:
raise util.Abort(_('The specified revisions must have '
'exactly one common root'))
root = rr[0].node()
keep = opts.get('keep', False)
revs = between(repo, root, topmost, keep)
if not revs:
raise util.Abort(_('%s is not an ancestor of working directory') %
node.short(root))
ctxs = [repo[r] for r in revs]
if not rules:
rules = '\n'.join([makedesc(c) for c in ctxs])
rules += '\n\n'
rules += editcomment % (node.short(root), node.short(topmost))
rules = ui.edit(rules, ui.username())
# Save edit rules in .hg/histedit-last-edit.txt in case
# the user needs to ask for help after something
# surprising happens.
f = open(repo.join('histedit-last-edit.txt'), 'w')
f.write(rules)
f.close()
else:
if rules == '-':
f = sys.stdin
else:
f = open(rules)
rules = f.read()
f.close()
rules = [l for l in (r.strip() for r in rules.splitlines())
if l and not l.startswith('#')]
rules = verifyrules(rules, repo, ctxs)
parentctx = repo[root].parents()[0]
replacements = []
while rules:
writestate(repo, parentctx.node(), rules, keep, topmost, replacements)
action, ha = rules.pop(0)
ui.debug('histedit: processing %s %s\n' % (action, ha))
actfunc = actiontable[action]
parentctx, replacement_ = actfunc(ui, repo, parentctx, ha, opts)
replacements.extend(replacement_)
hg.update(repo, parentctx.node())
mapping, tmpnodes, created, ntm = processreplacement(repo, replacements)
if mapping:
for prec, succs in mapping.iteritems():
if not succs:
ui.debug('histedit: %s is dropped\n' % node.short(prec))
else:
ui.debug('histedit: %s is replaced by %s\n' % (
node.short(prec), node.short(succs[0])))
if len(succs) > 1:
m = 'histedit: %s'
for n in succs[1:]:
ui.debug(m % node.short(n))
if not keep:
if mapping:
movebookmarks(ui, repo, mapping, topmost, ntm)
# TODO update mq state
if obsolete._enabled:
markers = []
# sort by revision number because it sound "right"
for prec in sorted(mapping, key=repo.changelog.rev):
succs = mapping[prec]
markers.append((repo[prec],
tuple(repo[s] for s in succs)))
if markers:
obsolete.createmarkers(repo, markers)
else:
cleanupnode(ui, repo, 'replaced', mapping)
cleanupnode(ui, repo, 'temp', tmpnodes)
os.unlink(os.path.join(repo.path, 'histedit-state'))
if os.path.exists(repo.sjoin('undo')):
os.unlink(repo.sjoin('undo'))
def gatherchildren(repo, ctx):
# is there any new commit between the expected parent and "."
#
# note: does not take non linear new change in account (but previous
# implementation didn't used them anyway (issue3655)
newchildren = [c.node() for c in repo.set('(%d::.)', ctx)]
if ctx.node() != node.nullid:
if not newchildren:
# `ctx` should match but no result. This means that
# currentnode is not a descendant from ctx.
msg = _('%s is not an ancestor of working directory')
hint = _('use "histedit --abort" to clear broken state')
raise util.Abort(msg % ctx, hint=hint)
newchildren.pop(0) # remove ctx
return newchildren
def bootstrapcontinue(ui, repo, parentctx, rules, opts):
action, currentnode = rules.pop(0)
ctx = repo[currentnode]
newchildren = gatherchildren(repo, parentctx)
# Commit dirty working directory if necessary
new = None
m, a, r, d = repo.status()[:4]
if m or a or r or d:
# prepare the message for the commit to comes
if action in ('f', 'fold', 'r', 'roll'):
message = 'fold-temp-revision %s' % currentnode
else:
message = ctx.description()
editopt = action in ('e', 'edit', 'm', 'mess')
canonaction = {'e': 'edit', 'm': 'mess', 'p': 'pick'}
editform = 'histedit.%s' % canonaction.get(action, action)
editor = cmdutil.getcommiteditor(edit=editopt, editform=editform)
commit = commitfuncfor(repo, ctx)
new = commit(text=message, user=ctx.user(),
date=ctx.date(), extra=ctx.extra(),
editor=editor)
if new is not None:
newchildren.append(new)
replacements = []
# track replacements
if ctx.node() not in newchildren:
# note: new children may be empty when the changeset is dropped.
# this happen e.g during conflicting pick where we revert content
# to parent.
replacements.append((ctx.node(), tuple(newchildren)))
if action in ('f', 'fold', 'r', 'roll'):
if newchildren:
# finalize fold operation if applicable
if new is None:
new = newchildren[-1]
else:
newchildren.pop() # remove new from internal changes
foldopts = opts
if action in ('r', 'roll'):
foldopts = foldopts.copy()
foldopts['rollup'] = True
parentctx, repl = finishfold(ui, repo, parentctx, ctx, new,
foldopts, newchildren)
replacements.extend(repl)
else:
# newchildren is empty if the fold did not result in any commit
# this happen when all folded change are discarded during the
# merge.
replacements.append((ctx.node(), (parentctx.node(),)))
elif newchildren:
# otherwise update "parentctx" before proceeding to further operation
parentctx = repo[newchildren[-1]]
return parentctx, replacements
def between(repo, old, new, keep):
"""select and validate the set of revision to edit
When keep is false, the specified set can't have children."""
ctxs = list(repo.set('%n::%n', old, new))
if ctxs and not keep:
if (not obsolete._enabled and
repo.revs('(%ld::) - (%ld)', ctxs, ctxs)):
raise util.Abort(_('cannot edit history that would orphan nodes'))
if repo.revs('(%ld) and merge()', ctxs):
raise util.Abort(_('cannot edit history that contains merges'))
root = ctxs[0] # list is already sorted by repo.set
if not root.mutable():
raise util.Abort(_('cannot edit immutable changeset: %s') % root)
return [c.node() for c in ctxs]
def writestate(repo, parentnode, rules, keep, topmost, replacements):
fp = open(os.path.join(repo.path, 'histedit-state'), 'w')
pickle.dump((parentnode, rules, keep, topmost, replacements), fp)
fp.close()
def readstate(repo):
"""Returns a tuple of (parentnode, rules, keep, topmost, replacements).
"""
try:
fp = open(os.path.join(repo.path, 'histedit-state'))
except IOError, err:
if err.errno != errno.ENOENT:
raise
raise util.Abort(_('no histedit in progress'))
return pickle.load(fp)
def makedesc(c):
"""build a initial action line for a ctx `c`
line are in the form:
pick <hash> <rev> <summary>
"""
summary = ''
if c.description():
summary = c.description().splitlines()[0]
line = 'pick %s %d %s' % (c, c.rev(), summary)
# trim to 80 columns so it's not stupidly wide in my editor
return util.ellipsis(line, 80)
def verifyrules(rules, repo, ctxs):
"""Verify that there exists exactly one edit rule per given changeset.
Will abort if there are to many or too few rules, a malformed rule,
or a rule on a changeset outside of the user-given range.
"""
parsed = []
expected = set(str(c) for c in ctxs)
seen = set()
for r in rules:
if ' ' not in r:
raise util.Abort(_('malformed line "%s"') % r)
action, rest = r.split(' ', 1)
ha = rest.strip().split(' ', 1)[0]
try:
ha = str(repo[ha]) # ensure its a short hash
except error.RepoError:
raise util.Abort(_('unknown changeset %s listed') % ha)
if ha not in expected:
raise util.Abort(
_('may not use changesets other than the ones listed'))
if ha in seen:
raise util.Abort(_('duplicated command for changeset %s') % ha)
seen.add(ha)
if action not in actiontable:
raise util.Abort(_('unknown action "%s"') % action)
parsed.append([action, ha])
missing = sorted(expected - seen) # sort to stabilize output
if missing:
raise util.Abort(_('missing rules for changeset %s') % missing[0],
hint=_('do you want to use the drop action?'))
return parsed
def processreplacement(repo, replacements):
"""process the list of replacements to return
1) the final mapping between original and created nodes
2) the list of temporary node created by histedit
3) the list of new commit created by histedit"""
allsuccs = set()
replaced = set()
fullmapping = {}
# initialise basic set
# fullmapping record all operation recorded in replacement
for rep in replacements:
allsuccs.update(rep[1])
replaced.add(rep[0])
fullmapping.setdefault(rep[0], set()).update(rep[1])
new = allsuccs - replaced
tmpnodes = allsuccs & replaced
# Reduce content fullmapping into direct relation between original nodes
# and final node created during history edition
# Dropped changeset are replaced by an empty list
toproceed = set(fullmapping)
final = {}
while toproceed:
for x in list(toproceed):
succs = fullmapping[x]
for s in list(succs):
if s in toproceed:
# non final node with unknown closure
# We can't process this now
break
elif s in final:
# non final node, replace with closure
succs.remove(s)
succs.update(final[s])
else:
final[x] = succs
toproceed.remove(x)
# remove tmpnodes from final mapping
for n in tmpnodes:
del final[n]
# we expect all changes involved in final to exist in the repo
# turn `final` into list (topologically sorted)
nm = repo.changelog.nodemap
for prec, succs in final.items():
final[prec] = sorted(succs, key=nm.get)
# computed topmost element (necessary for bookmark)
if new:
newtopmost = sorted(new, key=repo.changelog.rev)[-1]
elif not final:
# Nothing rewritten at all. we won't need `newtopmost`
# It is the same as `oldtopmost` and `processreplacement` know it
newtopmost = None
else:
# every body died. The newtopmost is the parent of the root.
newtopmost = repo[sorted(final, key=repo.changelog.rev)[0]].p1().node()
return final, tmpnodes, new, newtopmost
def movebookmarks(ui, repo, mapping, oldtopmost, newtopmost):
"""Move bookmark from old to newly created node"""
if not mapping:
# if nothing got rewritten there is not purpose for this function
return
moves = []
for bk, old in sorted(repo._bookmarks.iteritems()):
if old == oldtopmost:
# special case ensure bookmark stay on tip.
#
# This is arguably a feature and we may only want that for the
# active bookmark. But the behavior is kept compatible with the old
# version for now.
moves.append((bk, newtopmost))
continue
base = old
new = mapping.get(base, None)
if new is None:
continue
while not new:
# base is killed, trying with parent
base = repo[base].p1().node()
new = mapping.get(base, (base,))
# nothing to move
moves.append((bk, new[-1]))
if moves:
marks = repo._bookmarks
for mark, new in moves:
old = marks[mark]
ui.note(_('histedit: moving bookmarks %s from %s to %s\n')
% (mark, node.short(old), node.short(new)))
marks[mark] = new
marks.write()
def cleanupnode(ui, repo, name, nodes):
"""strip a group of nodes from the repository
The set of node to strip may contains unknown nodes."""
ui.debug('should strip %s nodes %s\n' %
(name, ', '.join([node.short(n) for n in nodes])))
lock = None
try:
lock = repo.lock()
# Find all node that need to be stripped
# (we hg %lr instead of %ln to silently ignore unknown item
nm = repo.changelog.nodemap
nodes = sorted(n for n in nodes if n in nm)
roots = [c.node() for c in repo.set("roots(%ln)", nodes)]
for c in roots:
# We should process node in reverse order to strip tip most first.
# but this trigger a bug in changegroup hook.
# This would reduce bundle overhead
repair.strip(ui, repo, c)
finally:
release(lock)
def summaryhook(ui, repo):
if not os.path.exists(repo.join('histedit-state')):
return
(parentctxnode, rules, keep, topmost, replacements) = readstate(repo)
if rules:
# i18n: column positioning for "hg summary"
ui.write(_('hist: %s (histedit --continue)\n') %
(ui.label(_('%d remaining'), 'histedit.remaining') %
len(rules)))
def extsetup(ui):
cmdutil.summaryhooks.add('histedit', summaryhook)
cmdutil.unfinishedstates.append(
['histedit-state', False, True, _('histedit in progress'),
_("use 'hg histedit --continue' or 'hg histedit --abort'")])