view tests/test-convert-cvs-synthetic.t @ 26457:7e81305092a0

demandimport: replace more references to _demandmod instances

_demandmod instances may be referenced by multiple importing modules.
Before this patch, the _demandmod instance only maintained a reference
to its first consumer when using the "from X import Y" syntax. This is
because we only created a single _demandmod instance (attached to the
parent X module). If multiple modules A and B performed
"from X import Y", we'd produce a single _demandmod instance
"demandmod" with the following references:

  X.Y = <demandmod>
  A.Y = <demandmod>
  B.Y = <demandmod>

The locals from the first consumer (A) would be stored in <demandmod1>.
When <demandmod1> was loaded, we'd look at the locals for the first
consumer and replace the symbol, if necessary. This resulted in state:

  X.Y = <module>
  A.Y = <module>
  B.Y = <demandmod>

B's reference to Y wasn't updated and was still using the proxy object
because we just didn't record that B had a reference to <demandmod> that
needed updating!

With this patch, we add support for tracking which modules in addition
to the initial importer have a reference to the _demandmod instance and
we replace those references at module load time.

In the case of posix.py, this fixes an issue where the "encoding" module
was being proxied, resulting in hundreds of thousands of
__getattribute__ lookups on the _demandmod instance during dirstate
operations on mozilla-central, speeding up execution by many
milliseconds. There are likely several other operation that benefit from
this change as well.

The new mechanism isn't perfect: references in locals (not globals) may
likely linger. So, if there is an import inside a function and a symbol
from that module is used in a hot loop, we could have unwanted overhead
from proxying through _demandmod. Non-global imports are discouraged
anyway. So hopefully this isn't a big deal in practice. We could
potentially deploy a code checker that bans use of attribute lookups of
function-level-imported modules inside loops.

This deficiency in theory could be avoided by storing the set of globals
and locals dicts to update in the _demandmod instance. However, I tried
this and it didn't work. One reason is that some globals are _demandmod
instances. We could work around this, but it's a bit more work. There
also might be other module import foo at play. The solution as
implemented is better than what we had and IMO is good enough for the
time being.

It's worth noting that this sub-optimal behavior was made worse by the
introduction of absolute_import and its recommended "from . import X"
syntax for importing modules from the "mercurial" package. If we ever
wrote performance tests, measuring the amount of module imports and
__getattribute__ proxy calls through _demandmod instances would be
something I'd have it check.

#require cvs112

This feature requires use of builtin cvsps!

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create cvs repository with one project

  $ mkdir cvsrepo
  $ cd cvsrepo
  $ CVSROOT=`pwd`
  $ export CVSROOT
  $ CVS_OPTIONS=-f
  $ export CVS_OPTIONS
  $ cd ..
  $ rmdir cvsrepo
  $ cvscall()
  > {
  >     cvs -f "$@"
  > }

output of 'cvs ci' varies unpredictably, so just discard it

  $ cvsci()
  > {
  >     sleep 1
  >     cvs -f ci "$@" >/dev/null
  > }
  $ cvscall -d "$CVSROOT" init
  $ mkdir cvsrepo/proj
  $ cvscall -q co proj

create file1 on the trunk

  $ cd proj
  $ touch file1
  $ cvscall -Q add file1
  $ cvsci -m"add file1 on trunk" file1

create two branches

  $ cvscall -q tag -b v1_0
  T file1
  $ cvscall -q tag -b v1_1
  T file1

create file2 on branch v1_0

  $ cvscall -Q up -rv1_0
  $ touch file2
  $ cvscall -Q add file2
  $ cvsci -m"add file2" file2

create file3, file4 on branch v1_1

  $ cvscall -Q up -rv1_1
  $ touch file3
  $ touch file4
  $ cvscall -Q add file3 file4
  $ cvsci -m"add file3, file4 on branch v1_1" file3 file4

merge file2 from v1_0 to v1_1

  $ cvscall -Q up -jv1_0
  $ cvsci -m"MERGE from v1_0: add file2"
  cvs commit: Examining .

Step things up a notch: now we make the history really hairy, with
changes bouncing back and forth between trunk and v1_2 and merges
going both ways.  (I.e., try to model the real world.)
create branch v1_2

  $ cvscall -Q up -A
  $ cvscall -q tag -b v1_2
  T file1

create file5 on branch v1_2

  $ cvscall -Q up -rv1_2
  $ touch file5
  $ cvs -Q add file5
  $ cvsci -m"add file5 on v1_2"
  cvs commit: Examining .

create file6 on trunk post-v1_2

  $ cvscall -Q up -A
  $ touch file6
  $ cvscall -Q add file6
  $ cvsci -m"add file6 on trunk post-v1_2"
  cvs commit: Examining .

merge file5 from v1_2 to trunk

  $ cvscall -Q up -A
  $ cvscall -Q up -jv1_2 file5
  $ cvsci -m"MERGE from v1_2: add file5"
  cvs commit: Examining .

merge file6 from trunk to v1_2

  $ cvscall -Q up -rv1_2
  $ cvscall up -jHEAD file6
  U file6
  $ cvsci -m"MERGE from HEAD: add file6"
  cvs commit: Examining .

cvs rlog output

  $ cvscall -q rlog proj | egrep '^(RCS file|revision)'
  RCS file: $TESTTMP/cvsrepo/proj/file1,v
  revision 1.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file2,v
  revision 1.1
  revision 1.1.4.2
  revision 1.1.4.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file3,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file4,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file5,v
  revision 1.2
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file6,v
  revision 1.1
  revision 1.1.2.2
  revision 1.1.2.1

convert to hg (#1)

  $ cd ..
  $ hg convert --datesort proj proj.hg
  initializing destination proj.hg repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#1)

  $ hg -R proj.hg log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk
  

convert to hg (#2: with merge detection)

  $ hg convert \
  >   --config convert.cvsps.mergefrom='"^MERGE from (\S+):"' \
  >   --datesort \
  >   proj proj.hg2
  initializing destination proj.hg2 repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#2)

  $ hg -R proj.hg2 log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk