view tests/test-merge-tools.t @ 26457:7e81305092a0

demandimport: replace more references to _demandmod instances

_demandmod instances may be referenced by multiple importing modules.
Before this patch, the _demandmod instance only maintained a reference
to its first consumer when using the "from X import Y" syntax. This is
because we only created a single _demandmod instance (attached to the
parent X module). If multiple modules A and B performed
"from X import Y", we'd produce a single _demandmod instance
"demandmod" with the following references:

  X.Y = <demandmod>
  A.Y = <demandmod>
  B.Y = <demandmod>

The locals from the first consumer (A) would be stored in <demandmod1>.
When <demandmod1> was loaded, we'd look at the locals for the first
consumer and replace the symbol, if necessary. This resulted in state:

  X.Y = <module>
  A.Y = <module>
  B.Y = <demandmod>

B's reference to Y wasn't updated and was still using the proxy object
because we just didn't record that B had a reference to <demandmod> that
needed updating!

With this patch, we add support for tracking which modules in addition
to the initial importer have a reference to the _demandmod instance and
we replace those references at module load time.

In the case of posix.py, this fixes an issue where the "encoding" module
was being proxied, resulting in hundreds of thousands of
__getattribute__ lookups on the _demandmod instance during dirstate
operations on mozilla-central, speeding up execution by many
milliseconds. There are likely several other operation that benefit from
this change as well.

The new mechanism isn't perfect: references in locals (not globals) may
likely linger. So, if there is an import inside a function and a symbol
from that module is used in a hot loop, we could have unwanted overhead
from proxying through _demandmod. Non-global imports are discouraged
anyway. So hopefully this isn't a big deal in practice. We could
potentially deploy a code checker that bans use of attribute lookups of
function-level-imported modules inside loops.

This deficiency in theory could be avoided by storing the set of globals
and locals dicts to update in the _demandmod instance. However, I tried
this and it didn't work. One reason is that some globals are _demandmod
instances. We could work around this, but it's a bit more work. There
also might be other module import foo at play. The solution as
implemented is better than what we had and IMO is good enough for the
time being.

It's worth noting that this sub-optimal behavior was made worse by the
introduction of absolute_import and its recommended "from . import X"
syntax for importing modules from the "mercurial" package. If we ever
wrote performance tests, measuring the amount of module imports and
__getattribute__ proxy calls through _demandmod instances would be
something I'd have it check.

test merge-tools configuration - mostly exercising filemerge.py

  $ unset HGMERGE # make sure HGMERGE doesn't interfere with the test
  $ hg init

revision 0

  $ echo "revision 0" > f
  $ echo "space" >> f
  $ hg commit -Am "revision 0"
  adding f

revision 1

  $ echo "revision 1" > f
  $ echo "space" >> f
  $ hg commit -Am "revision 1"
  $ hg update 0 > /dev/null

revision 2

  $ echo "revision 2" > f
  $ echo "space" >> f
  $ hg commit -Am "revision 2"
  created new head
  $ hg update 0 > /dev/null

revision 3 - simple to merge

  $ echo "revision 3" >> f
  $ hg commit -Am "revision 3"
  created new head

revision 4 - hard to merge

  $ hg update 0 > /dev/null
  $ echo "revision 4" > f
  $ hg commit -Am "revision 4"
  created new head

  $ echo "[merge-tools]" > .hg/hgrc

  $ beforemerge() {
  >   cat .hg/hgrc
  >   echo "# hg update -C 1"
  >   hg update -C 1 > /dev/null
  > }
  $ aftermerge() {
  >   echo "# cat f"
  >   cat f
  >   echo "# hg stat"
  >   hg stat
  >   rm -f f.orig
  > }

Tool selection

default is internal merge:

  $ beforemerge
  [merge-tools]
  # hg update -C 1

hg merge -r 2
override $PATH to ensure hgmerge not visible; use $PYTHON in case we're
running from a devel copy, not a temp installation

  $ PATH="$BINDIR:/usr/sbin" $PYTHON "$BINDIR"/hg merge -r 2
  merging f
  warning: conflicts during merge.
  merging f incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  <<<<<<< local: ef83787e2614  - test: revision 1
  revision 1
  =======
  revision 2
  >>>>>>> other: 0185f4e0cf02  - test: revision 2
  space
  # hg stat
  M f
  ? f.orig

simplest hgrc using false for merge:

  $ echo "false.whatever=" >> .hg/hgrc
  $ beforemerge
  [merge-tools]
  false.whatever=
  # hg update -C 1
  $ hg merge -r 2
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

#if unix-permissions

unexecutable file in $PATH shouldn't be found:

  $ echo "echo fail" > false
  $ hg up -qC 1
  $ PATH="`pwd`:$BINDIR:/usr/sbin" $PYTHON "$BINDIR"/hg merge -r 2
  merging f
  warning: conflicts during merge.
  merging f incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ rm false

#endif

executable directory in $PATH shouldn't be found:

  $ mkdir false
  $ hg up -qC 1
  $ PATH="`pwd`:$BINDIR:/usr/sbin" $PYTHON "$BINDIR"/hg merge -r 2
  merging f
  warning: conflicts during merge.
  merging f incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ rmdir false

true with higher .priority gets precedence:

  $ echo "true.priority=1" >> .hg/hgrc
  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  # hg update -C 1
  $ hg merge -r 2
  merging f
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

unless lowered on command line:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.priority=-7
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

or false set higher on command line:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.false.priority=117
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

or true.executable not found in PATH:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.executable=nonexistentmergetool
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

or true.executable with bogus path:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.executable=/nonexistent/mergetool
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

but true.executable set to cat found in PATH works:

  $ echo "true.executable=cat" >> .hg/hgrc
  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2
  merging f
  revision 1
  space
  revision 0
  space
  revision 2
  space
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

and true.executable set to cat with path works:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.executable=cat
  merging f
  revision 1
  space
  revision 0
  space
  revision 2
  space
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

#if unix-permissions

environment variables in true.executable are handled:

  $ echo 'echo "custom merge tool"' > .hg/merge.sh
  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg --config merge-tools.true.executable='sh' \
  >    --config merge-tools.true.args=.hg/merge.sh \
  >    merge -r 2
  merging f
  custom merge tool
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

#endif

Tool selection and merge-patterns

merge-patterns specifies new tool false:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-patterns.f=false
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

merge-patterns specifies executable not found in PATH and gets warning:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-patterns.f=true --config merge-tools.true.executable=nonexistentmergetool
  couldn't find merge tool true specified for f
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

merge-patterns specifies executable with bogus path and gets warning:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-patterns.f=true --config merge-tools.true.executable=/nonexistent/mergetool
  couldn't find merge tool true specified for f
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

ui.merge overrules priority

ui.merge specifies false:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=false
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

ui.merge specifies internal:fail:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=internal:fail
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

ui.merge specifies :local (without internal prefix):

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=:local
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

ui.merge specifies internal:other:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=internal:other
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 2
  space
  # hg stat
  M f

ui.merge specifies internal:prompt:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=internal:prompt
   no tool found to merge f
  keep (l)ocal or take (o)ther? l
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

ui.merge specifies internal:dump:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=internal:dump
  merging f
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.base
  ? f.local
  ? f.orig
  ? f.other

f.base:

  $ cat f.base
  revision 0
  space

f.local:

  $ cat f.local
  revision 1
  space

f.other:

  $ cat f.other
  revision 2
  space
  $ rm f.base f.local f.other

ui.merge specifies internal:other but is overruled by pattern for false:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=internal:other --config merge-patterns.f=false
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

Premerge

ui.merge specifies internal:other but is overruled by --tool=false

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config ui.merge=internal:other --tool=false
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

HGMERGE specifies internal:other but is overruled by --tool=false

  $ HGMERGE=internal:other ; export HGMERGE
  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --tool=false
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

  $ unset HGMERGE # make sure HGMERGE doesn't interfere with remaining tests

update is a merge ...

(this also tests that files reverted with '--rev REV' are treated as
"modified", even if none of mode, size and timestamp of them isn't
changed on the filesystem (see also issue4583))

  $ cat >> $HGRCPATH <<EOF
  > [fakedirstatewritetime]
  > # emulate invoking dirstate.write() via repo.status()
  > # at 2000-01-01 00:00
  > fakenow = 200001010000
  > EOF

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg update -q 0
  $ f -s f
  f: size=17
  $ touch -t 200001010000 f
  $ hg debugrebuildstate
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > fakedirstatewritetime = $TESTDIR/fakedirstatewritetime.py
  > EOF
  $ hg revert -q -r 1 .
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > fakedirstatewritetime = !
  > EOF
  $ f -s f
  f: size=17
  $ touch -t 200001010000 f
  $ hg status f
  M f
  $ hg update -r 2
  merging f
  revision 1
  space
  revision 0
  space
  revision 2
  space
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

update should also have --tool

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg update -q 0
  $ f -s f
  f: size=17
  $ touch -t 200001010000 f
  $ hg debugrebuildstate
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > fakedirstatewritetime = $TESTDIR/fakedirstatewritetime.py
  > EOF
  $ hg revert -q -r 1 .
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > fakedirstatewritetime = !
  > EOF
  $ f -s f
  f: size=17
  $ touch -t 200001010000 f
  $ hg status f
  M f
  $ hg update -r 2 --tool false
  merging f
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

Default is silent simplemerge:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 3
  merging f
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  revision 3
  # hg stat
  M f

.premerge=True is same:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 3 --config merge-tools.true.premerge=True
  merging f
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  revision 3
  # hg stat
  M f

.premerge=False executes merge-tool:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 3 --config merge-tools.true.premerge=False
  merging f
  revision 1
  space
  revision 0
  space
  revision 0
  space
  revision 3
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

premerge=keep keeps conflict markers in:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 4 --config merge-tools.true.premerge=keep
  merging f
  <<<<<<< local: ef83787e2614  - test: revision 1
  revision 1
  space
  =======
  revision 4
  >>>>>>> other: 81448d39c9a0 - test: revision 4
  revision 0
  space
  revision 4
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  <<<<<<< local: ef83787e2614  - test: revision 1
  revision 1
  space
  =======
  revision 4
  >>>>>>> other: 81448d39c9a0 - test: revision 4
  # hg stat
  M f

premerge=keep-merge3 keeps conflict markers with base content:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 4 --config merge-tools.true.premerge=keep-merge3
  merging f
  <<<<<<< local: ef83787e2614  - test: revision 1
  revision 1
  space
  ||||||| base
  revision 0
  space
  =======
  revision 4
  >>>>>>> other: 81448d39c9a0 - test: revision 4
  revision 0
  space
  revision 4
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  <<<<<<< local: ef83787e2614  - test: revision 1
  revision 1
  space
  ||||||| base
  revision 0
  space
  =======
  revision 4
  >>>>>>> other: 81448d39c9a0 - test: revision 4
  # hg stat
  M f


Tool execution

set tools.args explicit to include $base $local $other $output:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.executable=head --config merge-tools.true.args='$base $local $other $output' \
  >   | sed 's,==> .* <==,==> ... <==,g'
  merging f
  ==> ... <==
  revision 0
  space
  
  ==> ... <==
  revision 1
  space
  
  ==> ... <==
  revision 2
  space
  
  ==> ... <==
  revision 1
  space
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f

Merge with "echo mergeresult > $local":

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.executable=echo --config merge-tools.true.args='mergeresult > $local'
  merging f
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  mergeresult
  # hg stat
  M f

- and $local is the file f:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.executable=echo --config merge-tools.true.args='mergeresult > f'
  merging f
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  mergeresult
  # hg stat
  M f

Merge with "echo mergeresult > $output" - the variable is a bit magic:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -r 2 --config merge-tools.true.executable=echo --config merge-tools.true.args='mergeresult > $output'
  merging f
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ aftermerge
  # cat f
  mergeresult
  # hg stat
  M f

Merge using tool with a path that must be quoted:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ cat <<EOF > 'my merge tool'
  > cat "\$1" "\$2" "\$3" > "\$4"
  > EOF
  $ hg --config merge-tools.true.executable='sh' \
  >    --config merge-tools.true.args='"./my merge tool" $base $local $other $output' \
  >    merge -r 2
  merging f
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ rm -f 'my merge tool'
  $ aftermerge
  # cat f
  revision 0
  space
  revision 1
  space
  revision 2
  space
  # hg stat
  M f

Issue3581: Merging a filename that needs to be quoted
(This test doesn't work on Windows filesystems even on Linux, so check
for Unix-like permission)

#if unix-permissions
  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ echo "revision 5" > '"; exit 1; echo "'
  $ hg commit -Am "revision 5"
  adding "; exit 1; echo "
  warning: filename contains '"', which is reserved on Windows: '"; exit 1; echo "'
  $ hg update -C 1 > /dev/null
  $ echo "revision 6" > '"; exit 1; echo "'
  $ hg commit -Am "revision 6"
  adding "; exit 1; echo "
  warning: filename contains '"', which is reserved on Windows: '"; exit 1; echo "'
  created new head
  $ hg merge --config merge-tools.true.executable="true" -r 5
  merging "; exit 1; echo "
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg update -C 1 > /dev/null
#endif

Merge post-processing

cat is a bad merge-tool and doesn't change:

  $ beforemerge
  [merge-tools]
  false.whatever=
  true.priority=1
  true.executable=cat
  # hg update -C 1
  $ hg merge -y -r 2 --config merge-tools.true.checkchanged=1
  merging f
  revision 1
  space
  revision 0
  space
  revision 2
  space
   output file f appears unchanged
  was merge successful (yn)? n
  merging f failed!
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ aftermerge
  # cat f
  revision 1
  space
  # hg stat
  M f
  ? f.orig

#if symlink

internal merge cannot handle symlinks and shouldn't try:

  $ hg update -q -C 1
  $ rm f
  $ ln -s symlink f
  $ hg commit -qm 'f is symlink'
  $ hg merge -r 2 --tool internal:merge
  merging f
  warning: internal :merge cannot merge symlinks for f
  merging f incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

#endif