test-ssh: verify that stderr from remote is printed (issue4336)
The issue fixed in the previous patch was uncovered by implementing an
extension that printed additional output locally before the push command
completed. This test emulates that.
If this change is applied before the previous patch, the test will fail
on Linux, with the local output being printed before the "remote: "
lines.
# bundlerepo.py - repository class for viewing uncompressed bundles
#
# Copyright 2006, 2007 Benoit Boissinot <bboissin@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""Repository class for viewing uncompressed bundles.
This provides a read-only repository interface to bundles as if they
were part of the actual repository.
"""
from node import nullid
from i18n import _
import os, tempfile, shutil
import changegroup, util, mdiff, discovery, cmdutil, scmutil, exchange
import localrepo, changelog, manifest, filelog, revlog, error
class bundlerevlog(revlog.revlog):
def __init__(self, opener, indexfile, bundle, linkmapper):
# How it works:
# To retrieve a revision, we need to know the offset of the revision in
# the bundle (an unbundle object). We store this offset in the index
# (start). The base of the delta is stored in the base field.
#
# To differentiate a rev in the bundle from a rev in the revlog, we
# check revision against repotiprev.
opener = scmutil.readonlyvfs(opener)
revlog.revlog.__init__(self, opener, indexfile)
self.bundle = bundle
n = len(self)
self.repotiprev = n - 1
chain = None
self.bundlerevs = set() # used by 'bundle()' revset expression
while True:
chunkdata = bundle.deltachunk(chain)
if not chunkdata:
break
node = chunkdata['node']
p1 = chunkdata['p1']
p2 = chunkdata['p2']
cs = chunkdata['cs']
deltabase = chunkdata['deltabase']
delta = chunkdata['delta']
size = len(delta)
start = bundle.tell() - size
link = linkmapper(cs)
if node in self.nodemap:
# this can happen if two branches make the same change
chain = node
self.bundlerevs.add(self.nodemap[node])
continue
for p in (p1, p2):
if p not in self.nodemap:
raise error.LookupError(p, self.indexfile,
_("unknown parent"))
if deltabase not in self.nodemap:
raise LookupError(deltabase, self.indexfile,
_('unknown delta base'))
baserev = self.rev(deltabase)
# start, size, full unc. size, base (unused), link, p1, p2, node
e = (revlog.offset_type(start, 0), size, -1, baserev, link,
self.rev(p1), self.rev(p2), node)
self.index.insert(-1, e)
self.nodemap[node] = n
self.bundlerevs.add(n)
chain = node
n += 1
def _chunk(self, rev):
# Warning: in case of bundle, the diff is against what we stored as
# delta base, not against rev - 1
# XXX: could use some caching
if rev <= self.repotiprev:
return revlog.revlog._chunk(self, rev)
self.bundle.seek(self.start(rev))
return self.bundle.read(self.length(rev))
def revdiff(self, rev1, rev2):
"""return or calculate a delta between two revisions"""
if rev1 > self.repotiprev and rev2 > self.repotiprev:
# hot path for bundle
revb = self.index[rev2][3]
if revb == rev1:
return self._chunk(rev2)
elif rev1 <= self.repotiprev and rev2 <= self.repotiprev:
return revlog.revlog.revdiff(self, rev1, rev2)
return mdiff.textdiff(self.revision(self.node(rev1)),
self.revision(self.node(rev2)))
def revision(self, nodeorrev):
"""return an uncompressed revision of a given node or revision
number.
"""
if isinstance(nodeorrev, int):
rev = nodeorrev
node = self.node(rev)
else:
node = nodeorrev
rev = self.rev(node)
if node == nullid:
return ""
text = None
chain = []
iterrev = rev
# reconstruct the revision if it is from a changegroup
while iterrev > self.repotiprev:
if self._cache and self._cache[1] == iterrev:
text = self._cache[2]
break
chain.append(iterrev)
iterrev = self.index[iterrev][3]
if text is None:
text = self.baserevision(iterrev)
while chain:
delta = self._chunk(chain.pop())
text = mdiff.patches(text, [delta])
self._checkhash(text, node, rev)
self._cache = (node, rev, text)
return text
def baserevision(self, nodeorrev):
# Revlog subclasses may override 'revision' method to modify format of
# content retrieved from revlog. To use bundlerevlog with such class one
# needs to override 'baserevision' and make more specific call here.
return revlog.revlog.revision(self, nodeorrev)
def addrevision(self, text, transaction, link, p1=None, p2=None, d=None):
raise NotImplementedError
def addgroup(self, revs, linkmapper, transaction):
raise NotImplementedError
def strip(self, rev, minlink):
raise NotImplementedError
def checksize(self):
raise NotImplementedError
class bundlechangelog(bundlerevlog, changelog.changelog):
def __init__(self, opener, bundle):
changelog.changelog.__init__(self, opener)
linkmapper = lambda x: x
bundlerevlog.__init__(self, opener, self.indexfile, bundle,
linkmapper)
def baserevision(self, nodeorrev):
# Although changelog doesn't override 'revision' method, some extensions
# may replace this class with another that does. Same story with
# manifest and filelog classes.
return changelog.changelog.revision(self, nodeorrev)
class bundlemanifest(bundlerevlog, manifest.manifest):
def __init__(self, opener, bundle, linkmapper):
manifest.manifest.__init__(self, opener)
bundlerevlog.__init__(self, opener, self.indexfile, bundle,
linkmapper)
def baserevision(self, nodeorrev):
return manifest.manifest.revision(self, nodeorrev)
class bundlefilelog(bundlerevlog, filelog.filelog):
def __init__(self, opener, path, bundle, linkmapper, repo):
filelog.filelog.__init__(self, opener, path)
bundlerevlog.__init__(self, opener, self.indexfile, bundle,
linkmapper)
self._repo = repo
def baserevision(self, nodeorrev):
return filelog.filelog.revision(self, nodeorrev)
def _file(self, f):
self._repo.file(f)
class bundlepeer(localrepo.localpeer):
def canpush(self):
return False
class bundlerepository(localrepo.localrepository):
def __init__(self, ui, path, bundlename):
self._tempparent = None
try:
localrepo.localrepository.__init__(self, ui, path)
except error.RepoError:
self._tempparent = tempfile.mkdtemp()
localrepo.instance(ui, self._tempparent, 1)
localrepo.localrepository.__init__(self, ui, self._tempparent)
self.ui.setconfig('phases', 'publish', False, 'bundlerepo')
if path:
self._url = 'bundle:' + util.expandpath(path) + '+' + bundlename
else:
self._url = 'bundle:' + bundlename
self.tempfile = None
f = util.posixfile(bundlename, "rb")
self.bundle = exchange.readbundle(ui, f, bundlename)
if self.bundle.compressed():
fdtemp, temp = self.vfs.mkstemp(prefix="hg-bundle-",
suffix=".hg10un")
self.tempfile = temp
fptemp = os.fdopen(fdtemp, 'wb')
try:
fptemp.write("HG10UN")
while True:
chunk = self.bundle.read(2**18)
if not chunk:
break
fptemp.write(chunk)
finally:
fptemp.close()
f = self.vfs.open(self.tempfile, mode="rb")
self.bundle = exchange.readbundle(ui, f, bundlename, self.vfs)
# dict with the mapping 'filename' -> position in the bundle
self.bundlefilespos = {}
@localrepo.unfilteredpropertycache
def changelog(self):
# consume the header if it exists
self.bundle.changelogheader()
c = bundlechangelog(self.sopener, self.bundle)
self.manstart = self.bundle.tell()
return c
@localrepo.unfilteredpropertycache
def manifest(self):
self.bundle.seek(self.manstart)
# consume the header if it exists
self.bundle.manifestheader()
m = bundlemanifest(self.sopener, self.bundle, self.changelog.rev)
self.filestart = self.bundle.tell()
return m
@localrepo.unfilteredpropertycache
def manstart(self):
self.changelog
return self.manstart
@localrepo.unfilteredpropertycache
def filestart(self):
self.manifest
return self.filestart
def url(self):
return self._url
def file(self, f):
if not self.bundlefilespos:
self.bundle.seek(self.filestart)
while True:
chunkdata = self.bundle.filelogheader()
if not chunkdata:
break
fname = chunkdata['filename']
self.bundlefilespos[fname] = self.bundle.tell()
while True:
c = self.bundle.deltachunk(None)
if not c:
break
if f in self.bundlefilespos:
self.bundle.seek(self.bundlefilespos[f])
return bundlefilelog(self.sopener, f, self.bundle,
self.changelog.rev, self)
else:
return filelog.filelog(self.sopener, f)
def close(self):
"""Close assigned bundle file immediately."""
self.bundle.close()
if self.tempfile is not None:
self.vfs.unlink(self.tempfile)
if self._tempparent:
shutil.rmtree(self._tempparent, True)
def cancopy(self):
return False
def peer(self):
return bundlepeer(self)
def getcwd(self):
return os.getcwd() # always outside the repo
def instance(ui, path, create):
if create:
raise util.Abort(_('cannot create new bundle repository'))
parentpath = ui.config("bundle", "mainreporoot", "")
if not parentpath:
# try to find the correct path to the working directory repo
parentpath = cmdutil.findrepo(os.getcwd())
if parentpath is None:
parentpath = ''
if parentpath:
# Try to make the full path relative so we get a nice, short URL.
# In particular, we don't want temp dir names in test outputs.
cwd = os.getcwd()
if parentpath == cwd:
parentpath = ''
else:
cwd = os.path.join(cwd,'')
if parentpath.startswith(cwd):
parentpath = parentpath[len(cwd):]
u = util.url(path)
path = u.localpath()
if u.scheme == 'bundle':
s = path.split("+", 1)
if len(s) == 1:
repopath, bundlename = parentpath, s[0]
else:
repopath, bundlename = s
else:
repopath, bundlename = parentpath, path
return bundlerepository(ui, repopath, bundlename)
def getremotechanges(ui, repo, other, onlyheads=None, bundlename=None,
force=False):
'''obtains a bundle of changes incoming from other
"onlyheads" restricts the returned changes to those reachable from the
specified heads.
"bundlename", if given, stores the bundle to this file path permanently;
otherwise it's stored to a temp file and gets deleted again when you call
the returned "cleanupfn".
"force" indicates whether to proceed on unrelated repos.
Returns a tuple (local, csets, cleanupfn):
"local" is a local repo from which to obtain the actual incoming
changesets; it is a bundlerepo for the obtained bundle when the
original "other" is remote.
"csets" lists the incoming changeset node ids.
"cleanupfn" must be called without arguments when you're done processing
the changes; it closes both the original "other" and the one returned
here.
'''
tmp = discovery.findcommonincoming(repo, other, heads=onlyheads,
force=force)
common, incoming, rheads = tmp
if not incoming:
try:
if bundlename:
os.unlink(bundlename)
except OSError:
pass
return repo, [], other.close
commonset = set(common)
rheads = [x for x in rheads if x not in commonset]
bundle = None
bundlerepo = None
localrepo = other.local()
if bundlename or not localrepo:
# create a bundle (uncompressed if other repo is not local)
if other.capable('getbundle'):
cg = other.getbundle('incoming', common=common, heads=rheads)
elif onlyheads is None and not other.capable('changegroupsubset'):
# compat with older servers when pulling all remote heads
cg = other.changegroup(incoming, "incoming")
rheads = None
else:
cg = other.changegroupsubset(incoming, rheads, 'incoming')
bundletype = localrepo and "HG10BZ" or "HG10UN"
fname = bundle = changegroup.writebundle(cg, bundlename, bundletype)
# keep written bundle?
if bundlename:
bundle = None
if not localrepo:
# use the created uncompressed bundlerepo
localrepo = bundlerepo = bundlerepository(repo.baseui, repo.root,
fname)
# this repo contains local and other now, so filter out local again
common = repo.heads()
if localrepo:
# Part of common may be remotely filtered
# So use an unfiltered version
# The discovery process probably need cleanup to avoid that
localrepo = localrepo.unfiltered()
csets = localrepo.changelog.findmissing(common, rheads)
def cleanup():
if bundlerepo:
bundlerepo.close()
if bundle:
os.unlink(bundle)
other.close()
return (localrepo, csets, cleanup)