update: use context manager for config override (API)
Note that update wasn't resetting the value before, so any extensions
that called commands.update() and relied on ui.forcemerge being set
after it returned would now have to set it themselves.
(There technically a small API change in all of the patches in this
series, I believe: If extensions relied on the methods to *clear*
ui.forcemerge, then they would have to do that themselves now, because
ui.configoverride() actually restores the previous config, it doesn't
just clear it like these functions did before.)
Differential Revision: https://phab.mercurial-scm.org/D3741
# test revlog interaction about raw data (flagprocessor)
from __future__ import absolute_import, print_function
import sys
from mercurial import (
encoding,
node,
revlog,
transaction,
vfs,
)
# TESTTMP is optional. This makes it convenient to run without run-tests.py
tvfs = vfs.vfs(encoding.environ.get(b'TESTTMP', b'/tmp'))
# Enable generaldelta otherwise revlog won't use delta as expected by the test
tvfs.options = {b'generaldelta': True, b'revlogv1': True}
# The test wants to control whether to use delta explicitly, based on
# "storedeltachains".
revlog.revlog._isgooddeltainfo = lambda self, d, textlen: self.storedeltachains
def abort(msg):
print('abort: %s' % msg)
# Return 0 so run-tests.py could compare the output.
sys.exit()
# Register a revlog processor for flag EXTSTORED.
#
# It simply prepends a fixed header, and replaces '1' to 'i'. So it has
# insertion and replacement, and may be interesting to test revlog's line-based
# deltas.
_extheader = b'E\n'
def readprocessor(self, rawtext):
# True: the returned text could be used to verify hash
text = rawtext[len(_extheader):].replace(b'i', b'1')
return text, True
def writeprocessor(self, text):
# False: the returned rawtext shouldn't be used to verify hash
rawtext = _extheader + text.replace(b'1', b'i')
return rawtext, False
def rawprocessor(self, rawtext):
# False: do not verify hash. Only the content returned by "readprocessor"
# can be used to verify hash.
return False
revlog.addflagprocessor(revlog.REVIDX_EXTSTORED,
(readprocessor, writeprocessor, rawprocessor))
# Utilities about reading and appending revlog
def newtransaction():
# A transaction is required to write revlogs
report = lambda msg: None
return transaction.transaction(report, tvfs, {'plain': tvfs}, b'journal')
def newrevlog(name=b'_testrevlog.i', recreate=False):
if recreate:
tvfs.tryunlink(name)
rlog = revlog.revlog(tvfs, name)
return rlog
def appendrev(rlog, text, tr, isext=False, isdelta=True):
'''Append a revision. If isext is True, set the EXTSTORED flag so flag
processor will be used (and rawtext is different from text). If isdelta is
True, force the revision to be a delta, otherwise it's full text.
'''
nextrev = len(rlog)
p1 = rlog.node(nextrev - 1)
p2 = node.nullid
if isext:
flags = revlog.REVIDX_EXTSTORED
else:
flags = revlog.REVIDX_DEFAULT_FLAGS
# Change storedeltachains temporarily, to override revlog's delta decision
rlog.storedeltachains = isdelta
try:
rlog.addrevision(text, tr, nextrev, p1, p2, flags=flags)
return nextrev
except Exception as ex:
abort('rev %d: failed to append: %s' % (nextrev, ex))
finally:
# Restore storedeltachains. It is always True, see revlog.__init__
rlog.storedeltachains = True
def addgroupcopy(rlog, tr, destname=b'_destrevlog.i', optimaldelta=True):
'''Copy revlog to destname using revlog.addgroup. Return the copied revlog.
This emulates push or pull. They use changegroup. Changegroup requires
repo to work. We don't have a repo, so a dummy changegroup is used.
If optimaldelta is True, use optimized delta parent, so the destination
revlog could probably reuse it. Otherwise it builds sub-optimal delta, and
the destination revlog needs more work to use it.
This exercises some revlog.addgroup (and revlog._addrevision(text=None))
code path, which is not covered by "appendrev" alone.
'''
class dummychangegroup(object):
@staticmethod
def deltachunk(pnode):
pnode = pnode or node.nullid
parentrev = rlog.rev(pnode)
r = parentrev + 1
if r >= len(rlog):
return {}
if optimaldelta:
deltaparent = parentrev
else:
# suboptimal deltaparent
deltaparent = min(0, parentrev)
if not rlog.candelta(deltaparent, r):
deltaparent = -1
return {b'node': rlog.node(r), b'p1': pnode, b'p2': node.nullid,
b'cs': rlog.node(rlog.linkrev(r)), b'flags': rlog.flags(r),
b'deltabase': rlog.node(deltaparent),
b'delta': rlog.revdiff(deltaparent, r)}
def deltaiter(self):
chain = None
for chunkdata in iter(lambda: self.deltachunk(chain), {}):
node = chunkdata[b'node']
p1 = chunkdata[b'p1']
p2 = chunkdata[b'p2']
cs = chunkdata[b'cs']
deltabase = chunkdata[b'deltabase']
delta = chunkdata[b'delta']
flags = chunkdata[b'flags']
chain = node
yield (node, p1, p2, cs, deltabase, delta, flags)
def linkmap(lnode):
return rlog.rev(lnode)
dlog = newrevlog(destname, recreate=True)
dummydeltas = dummychangegroup().deltaiter()
dlog.addgroup(dummydeltas, linkmap, tr)
return dlog
def lowlevelcopy(rlog, tr, destname=b'_destrevlog.i'):
'''Like addgroupcopy, but use the low level revlog._addrevision directly.
It exercises some code paths that are hard to reach easily otherwise.
'''
dlog = newrevlog(destname, recreate=True)
for r in rlog:
p1 = rlog.node(r - 1)
p2 = node.nullid
if r == 0 or (rlog.flags(r) & revlog.REVIDX_EXTSTORED):
text = rlog.revision(r, raw=True)
cachedelta = None
else:
# deltaparent cannot have EXTSTORED flag.
deltaparent = max([-1] +
[p for p in range(r)
if rlog.flags(p) & revlog.REVIDX_EXTSTORED == 0])
text = None
cachedelta = (deltaparent, rlog.revdiff(deltaparent, r))
flags = rlog.flags(r)
ifh = dfh = None
try:
ifh = dlog.opener(dlog.indexfile, b'a+')
if not dlog._inline:
dfh = dlog.opener(dlog.datafile, b'a+')
dlog._addrevision(rlog.node(r), text, tr, r, p1, p2, flags,
cachedelta, ifh, dfh)
finally:
if dfh is not None:
dfh.close()
if ifh is not None:
ifh.close()
return dlog
# Utilities to generate revisions for testing
def genbits(n):
'''Given a number n, generate (2 ** (n * 2) + 1) numbers in range(2 ** n).
i.e. the generated numbers have a width of n bits.
The combination of two adjacent numbers will cover all possible cases.
That is to say, given any x, y where both x, and y are in range(2 ** n),
there is an x followed immediately by y in the generated sequence.
'''
m = 2 ** n
# Gray Code. See https://en.wikipedia.org/wiki/Gray_code
gray = lambda x: x ^ (x >> 1)
reversegray = dict((gray(i), i) for i in range(m))
# Generate (n * 2) bit gray code, yield lower n bits as X, and look for
# the next unused gray code where higher n bits equal to X.
# For gray codes whose higher bits are X, a[X] of them have been used.
a = [0] * m
# Iterate from 0.
x = 0
yield x
for i in range(m * m):
x = reversegray[x]
y = gray(a[x] + x * m) & (m - 1)
assert a[x] < m
a[x] += 1
x = y
yield x
def gentext(rev):
'''Given a revision number, generate dummy text'''
return b''.join(b'%d\n' % j for j in range(-1, rev % 5))
def writecases(rlog, tr):
'''Write some revisions interested to the test.
The test is interested in 3 properties of a revision:
- Is it a delta or a full text? (isdelta)
This is to catch some delta application issues.
- Does it have a flag of EXTSTORED? (isext)
This is to catch some flag processor issues. Especially when
interacted with revlog deltas.
- Is its text empty? (isempty)
This is less important. It is intended to try to catch some careless
checks like "if text" instead of "if text is None". Note: if flag
processor is involved, raw text may be not empty.
Write 65 revisions. So that all combinations of the above flags for
adjacent revisions are covered. That is to say,
len(set(
(r.delta, r.ext, r.empty, (r+1).delta, (r+1).ext, (r+1).empty)
for r in range(len(rlog) - 1)
)) is 64.
Where "r.delta", "r.ext", and "r.empty" are booleans matching properties
mentioned above.
Return expected [(text, rawtext)].
'''
result = []
for i, x in enumerate(genbits(3)):
isdelta, isext, isempty = bool(x & 1), bool(x & 2), bool(x & 4)
if isempty:
text = b''
else:
text = gentext(i)
rev = appendrev(rlog, text, tr, isext=isext, isdelta=isdelta)
# Verify text, rawtext, and rawsize
if isext:
rawtext = writeprocessor(None, text)[0]
else:
rawtext = text
if rlog.rawsize(rev) != len(rawtext):
abort('rev %d: wrong rawsize' % rev)
if rlog.revision(rev, raw=False) != text:
abort('rev %d: wrong text' % rev)
if rlog.revision(rev, raw=True) != rawtext:
abort('rev %d: wrong rawtext' % rev)
result.append((text, rawtext))
# Verify flags like isdelta, isext work as expected
# isdelta can be overridden to False if this or p1 has isext set
if bool(rlog.deltaparent(rev) > -1) and not isdelta:
abort('rev %d: isdelta is unexpected' % rev)
if bool(rlog.flags(rev)) != isext:
abort('rev %d: isext is ineffective' % rev)
return result
# Main test and checking
def checkrevlog(rlog, expected):
'''Check if revlog has expected contents. expected is [(text, rawtext)]'''
# Test using different access orders. This could expose some issues
# depending on revlog caching (see revlog._cache).
for r0 in range(len(rlog) - 1):
r1 = r0 + 1
for revorder in [[r0, r1], [r1, r0]]:
for raworder in [[True], [False], [True, False], [False, True]]:
nlog = newrevlog()
for rev in revorder:
for raw in raworder:
t = nlog.revision(rev, raw=raw)
if t != expected[rev][int(raw)]:
abort('rev %d: corrupted %stext'
% (rev, raw and 'raw' or ''))
def maintest():
expected = rl = None
with newtransaction() as tr:
rl = newrevlog(recreate=True)
expected = writecases(rl, tr)
checkrevlog(rl, expected)
print('local test passed')
# Copy via revlog.addgroup
rl1 = addgroupcopy(rl, tr)
checkrevlog(rl1, expected)
rl2 = addgroupcopy(rl, tr, optimaldelta=False)
checkrevlog(rl2, expected)
print('addgroupcopy test passed')
# Copy via revlog.clone
rl3 = newrevlog(name=b'_destrevlog3.i', recreate=True)
rl.clone(tr, rl3)
checkrevlog(rl3, expected)
print('clone test passed')
# Copy via low-level revlog._addrevision
rl4 = lowlevelcopy(rl, tr)
checkrevlog(rl4, expected)
print('lowlevelcopy test passed')
try:
maintest()
except Exception as ex:
abort('crashed: %s' % ex)