# ASCII graph log extension for Mercurial
#
# Copyright 2007 Joel Rosdahl <joel@rosdahl.net>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''command to view revision graphs from a shell
This extension adds a --graph option to the incoming, outgoing and log
commands. When this options is given, an ASCII representation of the
revision graph is also shown.
'''
from mercurial.cmdutil import revrange, show_changeset
from mercurial.commands import templateopts
from mercurial.i18n import _
from mercurial.node import nullrev
from mercurial import cmdutil, commands, extensions
from mercurial import hg, scmutil, util, graphmod
ASCIIDATA = 'ASC'
def asciiedges(seen, rev, parents):
"""adds edge info to changelog DAG walk suitable for ascii()"""
if rev not in seen:
seen.append(rev)
nodeidx = seen.index(rev)
knownparents = []
newparents = []
for parent in parents:
if parent in seen:
knownparents.append(parent)
else:
newparents.append(parent)
ncols = len(seen)
seen[nodeidx:nodeidx + 1] = newparents
edges = [(nodeidx, seen.index(p)) for p in knownparents]
if len(newparents) > 0:
edges.append((nodeidx, nodeidx))
if len(newparents) > 1:
edges.append((nodeidx, nodeidx + 1))
nmorecols = len(seen) - ncols
return nodeidx, edges, ncols, nmorecols
def fix_long_right_edges(edges):
for (i, (start, end)) in enumerate(edges):
if end > start:
edges[i] = (start, end + 1)
def get_nodeline_edges_tail(
node_index, p_node_index, n_columns, n_columns_diff, p_diff, fix_tail):
if fix_tail and n_columns_diff == p_diff and n_columns_diff != 0:
# Still going in the same non-vertical direction.
if n_columns_diff == -1:
start = max(node_index + 1, p_node_index)
tail = ["|", " "] * (start - node_index - 1)
tail.extend(["/", " "] * (n_columns - start))
return tail
else:
return ["\\", " "] * (n_columns - node_index - 1)
else:
return ["|", " "] * (n_columns - node_index - 1)
def draw_edges(edges, nodeline, interline):
for (start, end) in edges:
if start == end + 1:
interline[2 * end + 1] = "/"
elif start == end - 1:
interline[2 * start + 1] = "\\"
elif start == end:
interline[2 * start] = "|"
else:
nodeline[2 * end] = "+"
if start > end:
(start, end) = (end, start)
for i in range(2 * start + 1, 2 * end):
if nodeline[i] != "+":
nodeline[i] = "-"
def get_padding_line(ni, n_columns, edges):
line = []
line.extend(["|", " "] * ni)
if (ni, ni - 1) in edges or (ni, ni) in edges:
# (ni, ni - 1) (ni, ni)
# | | | | | | | |
# +---o | | o---+
# | | c | | c | |
# | |/ / | |/ /
# | | | | | |
c = "|"
else:
c = " "
line.extend([c, " "])
line.extend(["|", " "] * (n_columns - ni - 1))
return line
def asciistate():
"""returns the initial value for the "state" argument to ascii()"""
return [0, 0]
def ascii(ui, state, type, char, text, coldata):
"""prints an ASCII graph of the DAG
takes the following arguments (one call per node in the graph):
- ui to write to
- Somewhere to keep the needed state in (init to asciistate())
- Column of the current node in the set of ongoing edges.
- Type indicator of node data == ASCIIDATA.
- Payload: (char, lines):
- Character to use as node's symbol.
- List of lines to display as the node's text.
- Edges; a list of (col, next_col) indicating the edges between
the current node and its parents.
- Number of columns (ongoing edges) in the current revision.
- The difference between the number of columns (ongoing edges)
in the next revision and the number of columns (ongoing edges)
in the current revision. That is: -1 means one column removed;
0 means no columns added or removed; 1 means one column added.
"""
idx, edges, ncols, coldiff = coldata
assert -2 < coldiff < 2
if coldiff == -1:
# Transform
#
# | | | | | |
# o | | into o---+
# |X / |/ /
# | | | |
fix_long_right_edges(edges)
# add_padding_line says whether to rewrite
#
# | | | | | | | |
# | o---+ into | o---+
# | / / | | | # <--- padding line
# o | | | / /
# o | |
add_padding_line = (len(text) > 2 and coldiff == -1 and
[x for (x, y) in edges if x + 1 < y])
# fix_nodeline_tail says whether to rewrite
#
# | | o | | | | o | |
# | | |/ / | | |/ /
# | o | | into | o / / # <--- fixed nodeline tail
# | |/ / | |/ /
# o | | o | |
fix_nodeline_tail = len(text) <= 2 and not add_padding_line
# nodeline is the line containing the node character (typically o)
nodeline = ["|", " "] * idx
nodeline.extend([char, " "])
nodeline.extend(
get_nodeline_edges_tail(idx, state[1], ncols, coldiff,
state[0], fix_nodeline_tail))
# shift_interline is the line containing the non-vertical
# edges between this entry and the next
shift_interline = ["|", " "] * idx
if coldiff == -1:
n_spaces = 1
edge_ch = "/"
elif coldiff == 0:
n_spaces = 2
edge_ch = "|"
else:
n_spaces = 3
edge_ch = "\\"
shift_interline.extend(n_spaces * [" "])
shift_interline.extend([edge_ch, " "] * (ncols - idx - 1))
# draw edges from the current node to its parents
draw_edges(edges, nodeline, shift_interline)
# lines is the list of all graph lines to print
lines = [nodeline]
if add_padding_line:
lines.append(get_padding_line(idx, ncols, edges))
lines.append(shift_interline)
# make sure that there are as many graph lines as there are
# log strings
while len(text) < len(lines):
text.append("")
if len(lines) < len(text):
extra_interline = ["|", " "] * (ncols + coldiff)
while len(lines) < len(text):
lines.append(extra_interline)
# print lines
indentation_level = max(ncols, ncols + coldiff)
for (line, logstr) in zip(lines, text):
ln = "%-*s %s" % (2 * indentation_level, "".join(line), logstr)
ui.write(ln.rstrip() + '\n')
# ... and start over
state[0] = coldiff
state[1] = idx
def get_revs(repo, rev_opt):
if rev_opt:
revs = revrange(repo, rev_opt)
if len(revs) == 0:
return (nullrev, nullrev)
return (max(revs), min(revs))
else:
return (len(repo) - 1, 0)
def check_unsupported_flags(opts):
for op in ["follow_first", "copies", "newest_first"]:
if op in opts and opts[op]:
raise util.Abort(_("-G/--graph option is incompatible with --%s")
% op.replace("_", "-"))
def revset(pats, opts):
"""Return revset str built of revisions, log options and file patterns.
"""
opt2revset = dict(only_merges='merge',
only_branch='branch',
no_merges='not merge',
include='file',
exclude='not file',
prune='not follow')
revset = []
for op, val in opts.iteritems():
if not val:
continue
revop = opt2revset.get(op, op)
if op in ('follow', 'only_merges', 'no_merges'):
revset.append('%s()' % revop)
elif op in ("date", "keyword", "remove", "user", "branch",
"only_branch", "prune"):
revset.append('%s(%s)' % (op, val))
elif op in ('include', 'exclude'):
for f in val:
revset.append('%s(%r)' % (op, f))
elif op == 'rev':
revset.extend(val)
for path in pats:
revset.append('file(%r)' % path)
revset = ' and '.join(revset) or 'all()'
# we want reverted revset to build graph
revset = 'reverse(%s)' % revset
if opts['limit']:
revset = 'limit(%s, %s)' % (revset, opts['limit'])
return revset
def generate(ui, dag, displayer, showparents, edgefn):
seen, state = [], asciistate()
for rev, type, ctx, parents in dag:
char = ctx.node() in showparents and '@' or 'o'
displayer.show(ctx)
lines = displayer.hunk.pop(rev).split('\n')[:-1]
displayer.flush(rev)
ascii(ui, state, type, char, lines, edgefn(seen, rev, parents))
displayer.close()
def graphlog(ui, repo, *pats, **opts):
"""show revision history alongside an ASCII revision graph
Print a revision history alongside a revision graph drawn with
ASCII characters.
Nodes printed as an @ character are parents of the working
directory.
"""
check_unsupported_flags(opts)
revs = revrange(repo, [revset(pats, opts)])
revdag = graphmod.dagwalker(repo, revs)
displayer = show_changeset(ui, repo, opts, buffered=True)
showparents = [ctx.node() for ctx in repo[None].parents()]
generate(ui, revdag, displayer, showparents, asciiedges)
def graphrevs(repo, nodes, opts):
limit = cmdutil.loglimit(opts)
nodes.reverse()
if limit is not None:
nodes = nodes[:limit]
return graphmod.nodes(repo, nodes)
def goutgoing(ui, repo, dest=None, **opts):
"""show the outgoing changesets alongside an ASCII revision graph
Print the outgoing changesets alongside a revision graph drawn with
ASCII characters.
Nodes printed as an @ character are parents of the working
directory.
"""
check_unsupported_flags(opts)
o = hg._outgoing(ui, repo, dest, opts)
if o is None:
return
revdag = graphrevs(repo, o, opts)
displayer = show_changeset(ui, repo, opts, buffered=True)
showparents = [ctx.node() for ctx in repo[None].parents()]
generate(ui, revdag, displayer, showparents, asciiedges)
def gincoming(ui, repo, source="default", **opts):
"""show the incoming changesets alongside an ASCII revision graph
Print the incoming changesets alongside a revision graph drawn with
ASCII characters.
Nodes printed as an @ character are parents of the working
directory.
"""
def subreporecurse():
return 1
check_unsupported_flags(opts)
def display(other, chlist, displayer):
revdag = graphrevs(other, chlist, opts)
showparents = [ctx.node() for ctx in repo[None].parents()]
generate(ui, revdag, displayer, showparents, asciiedges)
hg._incoming(display, subreporecurse, ui, repo, source, opts, buffered=True)
def uisetup(ui):
'''Initialize the extension.'''
_wrapcmd(ui, 'log', commands.table, graphlog)
_wrapcmd(ui, 'incoming', commands.table, gincoming)
_wrapcmd(ui, 'outgoing', commands.table, goutgoing)
def _wrapcmd(ui, cmd, table, wrapfn):
'''wrap the command'''
def graph(orig, *args, **kwargs):
if kwargs['graph']:
return wrapfn(*args, **kwargs)
return orig(*args, **kwargs)
entry = extensions.wrapcommand(table, cmd, graph)
entry[1].append(('G', 'graph', None, _("show the revision DAG")))
cmdtable = {
"glog":
(graphlog,
[('l', 'limit', '',
_('limit number of changes displayed'), _('NUM')),
('p', 'patch', False, _('show patch')),
('r', 'rev', [],
_('show the specified revision or range'), _('REV')),
] + templateopts,
_('hg glog [OPTION]... [FILE]')),
}