rebase: store rebase state after each commit
Before this patch, we stored the rebase state early in the processing
of a node, before we updated the rebase state to indicate that the
node was processed. This meant that we could redo the working copy
merge and run into conflicts. However, this only happened in the
--collapse case if the rebase was interrupted while editing the final
commit message; in the case earlier interruptions, we would instead
detect the in-process revision by finding two dirstate parents.
This patch moves the writing of the rebase state to after we have
completed the revision completely, and, importantly, after we have
updated the rebase state to mark it done. This means we'll realize
that all nodes have been rebased in the case mentioned above of
editing the final commit message of a --collapse. See change to test
case.
I also moved the writing outside of the large if/elif block in
_rebasenode(). This shouldn't matter much, but seems cleaner. One
observable effect is if rebase was interrupted just after ignoring an
obsolete node ("not rebasing ####, already in destination"), we used
to come up with the same decision after --continue too, but after this
patch we'll instead say "already rebased ###". This seems more
consistent, since that's what we would do with obsolete nodes that had
been marked done earlier in the process (not only just before the
interruption).
Differential Revision: https://phab.mercurial-scm.org/D2913
# progress.py progress bars related code
#
# Copyright (C) 2010 Augie Fackler <durin42@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import errno
import threading
import time
from .i18n import _
from . import encoding
def spacejoin(*args):
return ' '.join(s for s in args if s)
def shouldprint(ui):
return not (ui.quiet or ui.plain('progress')) and (
ui._isatty(ui.ferr) or ui.configbool('progress', 'assume-tty'))
def fmtremaining(seconds):
"""format a number of remaining seconds in human readable way
This will properly display seconds, minutes, hours, days if needed"""
if seconds < 60:
# i18n: format XX seconds as "XXs"
return _("%02ds") % (seconds)
minutes = seconds // 60
if minutes < 60:
seconds -= minutes * 60
# i18n: format X minutes and YY seconds as "XmYYs"
return _("%dm%02ds") % (minutes, seconds)
# we're going to ignore seconds in this case
minutes += 1
hours = minutes // 60
minutes -= hours * 60
if hours < 30:
# i18n: format X hours and YY minutes as "XhYYm"
return _("%dh%02dm") % (hours, minutes)
# we're going to ignore minutes in this case
hours += 1
days = hours // 24
hours -= days * 24
if days < 15:
# i18n: format X days and YY hours as "XdYYh"
return _("%dd%02dh") % (days, hours)
# we're going to ignore hours in this case
days += 1
weeks = days // 7
days -= weeks * 7
if weeks < 55:
# i18n: format X weeks and YY days as "XwYYd"
return _("%dw%02dd") % (weeks, days)
# we're going to ignore days and treat a year as 52 weeks
weeks += 1
years = weeks // 52
weeks -= years * 52
# i18n: format X years and YY weeks as "XyYYw"
return _("%dy%02dw") % (years, weeks)
# file_write() and file_flush() of Python 2 do not restart on EINTR if
# the file is attached to a "slow" device (e.g. a terminal) and raise
# IOError. We cannot know how many bytes would be written by file_write(),
# but a progress text is known to be short enough to be written by a
# single write() syscall, so we can just retry file_write() with the whole
# text. (issue5532)
#
# This should be a short-term workaround. We'll need to fix every occurrence
# of write() to a terminal or pipe.
def _eintrretry(func, *args):
while True:
try:
return func(*args)
except IOError as err:
if err.errno == errno.EINTR:
continue
raise
class progbar(object):
def __init__(self, ui):
self.ui = ui
self._refreshlock = threading.Lock()
self.resetstate()
def resetstate(self):
self.topics = []
self.topicstates = {}
self.starttimes = {}
self.startvals = {}
self.printed = False
self.lastprint = time.time() + float(self.ui.config(
'progress', 'delay'))
self.curtopic = None
self.lasttopic = None
self.indetcount = 0
self.refresh = float(self.ui.config(
'progress', 'refresh'))
self.changedelay = max(3 * self.refresh,
float(self.ui.config(
'progress', 'changedelay')))
self.order = self.ui.configlist('progress', 'format')
self.estimateinterval = self.ui.configwith(
float, 'progress', 'estimateinterval')
def show(self, now, topic, pos, item, unit, total):
if not shouldprint(self.ui):
return
termwidth = self.width()
self.printed = True
head = ''
needprogress = False
tail = ''
for indicator in self.order:
add = ''
if indicator == 'topic':
add = topic
elif indicator == 'number':
if total:
add = b'%*d/%d' % (len(str(total)), pos, total)
else:
add = b'%d' % pos
elif indicator.startswith('item') and item:
slice = 'end'
if '-' in indicator:
wid = int(indicator.split('-')[1])
elif '+' in indicator:
slice = 'beginning'
wid = int(indicator.split('+')[1])
else:
wid = 20
if slice == 'end':
add = encoding.trim(item, wid, leftside=True)
else:
add = encoding.trim(item, wid)
add += (wid - encoding.colwidth(add)) * ' '
elif indicator == 'bar':
add = ''
needprogress = True
elif indicator == 'unit' and unit:
add = unit
elif indicator == 'estimate':
add = self.estimate(topic, pos, total, now)
elif indicator == 'speed':
add = self.speed(topic, pos, unit, now)
if not needprogress:
head = spacejoin(head, add)
else:
tail = spacejoin(tail, add)
if needprogress:
used = 0
if head:
used += encoding.colwidth(head) + 1
if tail:
used += encoding.colwidth(tail) + 1
progwidth = termwidth - used - 3
if total and pos <= total:
amt = pos * progwidth // total
bar = '=' * (amt - 1)
if amt > 0:
bar += '>'
bar += ' ' * (progwidth - amt)
else:
progwidth -= 3
self.indetcount += 1
# mod the count by twice the width so we can make the
# cursor bounce between the right and left sides
amt = self.indetcount % (2 * progwidth)
amt -= progwidth
bar = (' ' * int(progwidth - abs(amt)) + '<=>' +
' ' * int(abs(amt)))
prog = ''.join(('[', bar, ']'))
out = spacejoin(head, prog, tail)
else:
out = spacejoin(head, tail)
self._writeerr('\r' + encoding.trim(out, termwidth))
self.lasttopic = topic
self._flusherr()
def clear(self):
if not self.printed or not self.lastprint or not shouldprint(self.ui):
return
self._writeerr('\r%s\r' % (' ' * self.width()))
if self.printed:
# force immediate re-paint of progress bar
self.lastprint = 0
def complete(self):
if not shouldprint(self.ui):
return
if self.ui.configbool('progress', 'clear-complete'):
self.clear()
else:
self._writeerr('\n')
self._flusherr()
def _flusherr(self):
_eintrretry(self.ui.ferr.flush)
def _writeerr(self, msg):
_eintrretry(self.ui.ferr.write, msg)
def width(self):
tw = self.ui.termwidth()
return min(int(self.ui.config('progress', 'width', default=tw)), tw)
def estimate(self, topic, pos, total, now):
if total is None:
return ''
initialpos = self.startvals[topic]
target = total - initialpos
delta = pos - initialpos
if delta > 0:
elapsed = now - self.starttimes[topic]
seconds = (elapsed * (target - delta)) // delta + 1
return fmtremaining(seconds)
return ''
def speed(self, topic, pos, unit, now):
initialpos = self.startvals[topic]
delta = pos - initialpos
elapsed = now - self.starttimes[topic]
if elapsed > 0:
return _('%d %s/sec') % (delta / elapsed, unit)
return ''
def _oktoprint(self, now):
'''Check if conditions are met to print - e.g. changedelay elapsed'''
if (self.lasttopic is None # first time we printed
# not a topic change
or self.curtopic == self.lasttopic
# it's been long enough we should print anyway
or now - self.lastprint >= self.changedelay):
return True
else:
return False
def _calibrateestimate(self, topic, now, pos):
'''Adjust starttimes and startvals for topic so ETA works better
If progress is non-linear (ex. get much slower in the last minute),
it's more friendly to only use a recent time span for ETA and speed
calculation.
[======================================> ]
^^^^^^^
estimateinterval, only use this for estimation
'''
interval = self.estimateinterval
if interval <= 0:
return
elapsed = now - self.starttimes[topic]
if elapsed > interval:
delta = pos - self.startvals[topic]
newdelta = delta * interval / elapsed
# If a stall happens temporarily, ETA could change dramatically
# frequently. This is to avoid such dramatical change and make ETA
# smoother.
if newdelta < 0.1:
return
self.startvals[topic] = pos - newdelta
self.starttimes[topic] = now - interval
def progress(self, topic, pos, item='', unit='', total=None):
now = time.time()
self._refreshlock.acquire()
try:
if pos is None:
self.starttimes.pop(topic, None)
self.startvals.pop(topic, None)
self.topicstates.pop(topic, None)
# reset the progress bar if this is the outermost topic
if self.topics and self.topics[0] == topic and self.printed:
self.complete()
self.resetstate()
# truncate the list of topics assuming all topics within
# this one are also closed
if topic in self.topics:
self.topics = self.topics[:self.topics.index(topic)]
# reset the last topic to the one we just unwound to,
# so that higher-level topics will be stickier than
# lower-level topics
if self.topics:
self.lasttopic = self.topics[-1]
else:
self.lasttopic = None
else:
if topic not in self.topics:
self.starttimes[topic] = now
self.startvals[topic] = pos
self.topics.append(topic)
self.topicstates[topic] = pos, item, unit, total
self.curtopic = topic
self._calibrateestimate(topic, now, pos)
if now - self.lastprint >= self.refresh and self.topics:
if self._oktoprint(now):
self.lastprint = now
self.show(now, topic, *self.topicstates[topic])
finally:
self._refreshlock.release()