Check if repository exists
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Check if repository exists
From: Goffredo Baroncelli <kreijack@libero.it>
Subject: Re: Trivial: in remoterepository.__init__ check if the repository
exist
I hope that this is correct :-)
Another typo, another patch, tank to Peter Stamfest and Radoslaw Szkodzinski.
The patch is trivial: adds a check in the body of the init method of the
+remoterepository
class. Before if the path didn't exist, hg would not raise any error.
Test manually performed after the patch has been merged:
test: result
create a new repository from another local repository OK ( no problem )
create an empty repository OK ( no problem )
pull from a not existent repositary OK ( raise an error )
(error message tweaked by mpm)
manifest hash: ac7f625a8d87c693b61718b9fc5604d28b882bbd
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
iD8DBQFCuM0gywK+sNU5EO8RAsnGAJ42HE3m01tlGqrIR3GVfuhvCjEJkgCfffvp
bEhfvjaiAdBV50HMULq8N00=
=QDHW
-----END PGP SIGNATURE-----
HG(1)
=====
Matt Mackall <mpm@selenic.com>
v0.5, 27 May 2005
NAME
----
hg - command line interface to the Mercurial source code management system
SYNOPSIS
--------
'hg' [-v -d -q -y] <command> [command options] [files]
DESCRIPTION
-----------
The hg(1) command provides a command line interface to the Mercurial system.
NOTE
----
Many of the hg commands are not yet subdirectory and/or working directory
aware. This means that some commands will only work in the top level
repository directory or will only accept paths and filenames relative to the
top level. Merges and commits, in particular, should be done in the
top-level directory.
OPTIONS
-------
--debug, -d::
enable debugging output
--quiet, -q::
suppress output
--verbose, -v::
enable additional output
--noninteractive, -y::
do not prompt, assume 'yes' for any required answers
COMMAND ELEMENTS
----------------
files ...::
indicates one or more filename or relative path filenames
path::
indicates a path on the local machine
revision::
indicates a changeset which can be specified as a changeset id (int),
a tag, or a unique substring of the changeset hash value
repository path::
is either the pathname of a local repository of the URI of a remote
repository. There are two available URI protocols, http:// which is
fast and the old-http:// protocol which is much slower but does not
require python on the web host.
COMMANDS
--------
add [files ...]::
add the given files to the repository. Note that this just schedules the
files for addition at the next hg commit time.
addremove::
add all new files and remove all missing files from the repository. new
files are ignored if they match any of the patterns in .hgignore
annotate [-r revision -u -n -c] [files ...]::
list the files with each line showing the revision id responsible
for that line. -u will add the author to the revision id, -c will
print the changeset hash, and -n will ...
branch <path>::
create a new branch of the repository indicated by path in the current
directory. Note that there should not be a repository already initialized
in the current directory
checkout [revision]::
check out the indicated version of the repository into the working
directory. Note that currently no merge occurs with changed files
in the working dir.
commit::
commit all changed files in the working dir to the repository. This uses
the EDITOR environment variable to bring up an editor to add a commit
comment.
diff [-r revision] [-r revision] [files ...]::
generate a unified diff of the indicated files. If there are no
revisions specified, the working directory file is compared to
the tip, one revision specified indicates a comparison between the
working directory file and the specified revision, two revisions
compares the two versions specified.
dump <file> [revision]::
print the indicated revision of the file
dumpmanifest [revision]::
print the indicated revision of the manifest (list of version controlled
files)
export [revision]::
print the changeset header (author, changeset hash, parent, and commit
comment) and the diffs for a particular revision.
history::
print the revision history of the repository
init::
initialize a repository in the current directory
log <file>::
print the revision history of the specified file
merge <repository path>::
pull any changes from the specified repository to the repository in the
current directory. Use the value of the HGMERGE environment variable
as a program to resolve any merge conflicts between the two repositories.
An implicit commit is done at the end of this process if there were any
merge conflicts. Note that merge does not yet merge with changed files
in the working dir.
recover::
rollback an interrupted transaction
remove [files ...]::
schedule the indicated files for removal from the repository at the next
commit
serve [-a addr -n name -p port -t templatedir]::
this will start an http server, by default on port 8000, that will
allow browsing the repository using the hgweb interface and will allow
merging from the repository. -a sets the interface address, -p the
port to listen on, -n the name of the repository and -t sets the
location of the template directory.
status::
list new, changed, and missing files in the working directory
tags::
list the current tags
undo::
undo the last transaction
ENVIRONMENT VARIABLES
---------------------
HGMERGE::
points to an executable to use for resolving merge conflicts, the
program will be executed with four arguments: local file, remote
file, ancestor file, and original filename.
HGUSER::
this is the string used for the author value of a commit
HG_OPTS::
this string is used for default arguments to hg
PYTHONPATH::
this is used by Python to find imported modules and needs to be set
appropriately based on where mercurial is installed
EMAIL::
if HGUSER is not set, this will be used next as the author value for
a commit
LOGNAME::
if neither HGUSER nor EMAIL is set, LOGNAME will be used (with
'@hostname' appended) as the author value for a commit
EDITOR::
this is the name of the editor to use when committing
FILES
-----
.hgignore::
this file contains regular expressions (one per line) that describe file
names that should be ignored by hg
.hgtags::
this file contains changeset hash values and text tag names (one of each
seperated by spaces) that correspond to tagged versions of the repository
contents.
$HOME/.hgpaths::
this file contains a mapping from a symbolic name to a repository path
(which could be a local path or a remote URI), the format is
<symbolic name> <repository path> with each mapping on a seperate line
NON_TRANSPARENT PROXY SUPPORT
-----
To access a mercurial repository through a proxy,
create a file $HOME/.hgrc in the following format:
[http_proxy]
host=myproxy:8080
user=<username>
passwd=<password>
no=<localhost1>,<localhost2>,<localhost3>,...
"user","passwd" fields are used for authenticating proxies,
"no" is a comma-separated list of local host names
for which proxy must be bypassed.
BUGS
----
Probably lots, please post them to the mailing list (See Resources below)
when you find them.
AUTHOR
------
Written by Matt Mackall <mpm@selenic.com>
RESOURCES
---------
http://selenic.com/mercurial[Main Web Site]
http://selenic.com/hg[Source code repository]
http://selenic.com/mailman/listinfo/mercurial[Mailing list]
COPYING
-------
Copyright (C) 2005 Matt Mackall.
Free use of this software is granted under the terms of the GNU General
Public License (GPL).