rust: hooking into Python code
We introduce a new class called 'rustlazyancestors'
in the ancestors module, which is used only if
parsers.rustlazyancestors does exist.
The implementation of __contains__ stays unchanged,
but is now backed by the Rust iterator. It would
probably be a good candidate for further development,
though, as it is mostly looping, and duplicates the
'seen' set.
The Rust code could be further optimized, however it already
gives rise to performance improvements:
median timing from hg perfancestors:
- on pypy:
before: 0.077566s
after: 0.016676s -79%
- on mozilla central:
before: 0.190037s
after: 0.082225s -58%
- on a private repository (about one million revisions):
before: 0.567085s
after: 0.108816s -80%
- on another private repository (about 400 000 revisions):
before: 1.440918s
after: 0.290116s -80%
median timing for hg perfbranchmap base
- on pypy:
before: 1.383413s
after: 0.507993s -63%
- on mozilla central:
before: 2.821940s
after: 1.258902s -55%
- on a private repository (about one million revisions):
before: 77.065076s
after: 16.158475s -80%
- on another private repository (about 401 000 revisions):
before: 7.835503s
after: 3.545331s -54%
$ hg init ignorerepo
$ cd ignorerepo
debugignore with no hgignore should be deterministic:
$ hg debugignore
<nevermatcher>
Issue562: .hgignore requires newline at end:
$ touch foo
$ touch bar
$ touch baz
$ cat > makeignore.py <<EOF
> f = open(".hgignore", "w")
> f.write("ignore\n")
> f.write("foo\n")
> # No EOL here
> f.write("bar")
> f.close()
> EOF
$ "$PYTHON" makeignore.py
Should display baz only:
$ hg status
? baz
$ rm foo bar baz .hgignore makeignore.py
$ touch a.o
$ touch a.c
$ touch syntax
$ mkdir dir
$ touch dir/a.o
$ touch dir/b.o
$ touch dir/c.o
$ hg add dir/a.o
$ hg commit -m 0
$ hg add dir/b.o
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
$ echo "*.o" > .hgignore
$ hg status
abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
[255]
Ensure given files are relative to cwd
$ echo "dir/.*\.o" > .hgignore
$ hg status -i
I dir/c.o
$ hg debugignore dir/c.o dir/missing.o
dir/c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
dir/missing.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
$ cd dir
$ hg debugignore c.o missing.o
c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
missing.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
For icasefs, inexact matches also work, except for missing files
#if icasefs
$ hg debugignore c.O missing.O
c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
missing.O is not ignored
#endif
$ cd ..
$ echo ".*\.o" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
Ensure that comments work:
$ touch 'foo#bar' 'quux#'
#if no-windows
$ touch 'baz\#wat'
#endif
$ cat <<'EOF' >> .hgignore
> # full-line comment
> # whitespace-only comment line
> syntax# pattern, no whitespace, then comment
> a.c # pattern, then whitespace, then comment
> baz\\# # escaped comment character
> foo\#b # escaped comment character
> quux\## escaped comment character at end of name
> EOF
$ hg status
A dir/b.o
? .hgignore
$ rm 'foo#bar' 'quux#'
#if no-windows
$ rm 'baz\#wat'
#endif
Check that '^\.' does not ignore the root directory:
$ echo "^\." > .hgignore
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
Test that patterns from ui.ignore options are read:
$ echo > .hgignore
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
> EOF
$ echo "glob:**.o" > .hg/testhgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
empty out testhgignore
$ echo > .hg/testhgignore
Test relative ignore path (issue4473):
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.relative = .hg/testhgignorerel
> EOF
$ echo "glob:*.o" > .hg/testhgignorerel
$ cd dir
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ cd ..
$ echo > .hg/testhgignorerel
$ echo "syntax: glob" > .hgignore
$ echo "re:.*\.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "syntax: invalid" > .hgignore
$ hg status
$TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid'
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
? syntax
$ echo "syntax: glob" > .hgignore
$ echo "*.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "relglob:syntax*" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
$ echo "relglob:*" > .hgignore
$ hg status
A dir/b.o
$ cd dir
$ hg status .
A b.o
$ hg debugignore
<includematcher includes='(?:(?:|.*/)[^/]*(?:/|$))'>
$ hg debugignore b.o
b.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)
$ cd ..
Check patterns that match only the directory
"(fsmonitor !)" below assumes that fsmonitor is enabled with
"walk_on_invalidate = false" (default), which doesn't involve
re-walking whole repository at detection of .hgignore change.
$ echo "^dir\$" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o (fsmonitor !)
? syntax
Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)
$ echo "syntax: glob" > .hgignore
$ echo "dir/**/c.o" >> .hgignore
$ touch dir/c.o
$ mkdir dir/subdir
$ touch dir/subdir/c.o
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? syntax
$ hg debugignore a.c
a.c is not ignored
$ hg debugignore dir/c.o
dir/c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)
Check using 'include:' in ignore file
$ hg purge --all --config extensions.purge=
$ touch foo.included
$ echo ".*.included" > otherignore
$ hg status -I "include:otherignore"
? foo.included
$ echo "include:otherignore" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? otherignore
Check recursive uses of 'include:'
$ echo "include:nested/ignore" >> otherignore
$ mkdir nested
$ echo "glob:*ignore" > nested/ignore
$ hg status
A dir/b.o
$ cp otherignore goodignore
$ echo "include:badignore" >> otherignore
$ hg status
skipping unreadable pattern file 'badignore': $ENOENT$
A dir/b.o
$ mv goodignore otherignore
Check using 'include:' while in a non-root directory
$ cd ..
$ hg -R ignorerepo status
A dir/b.o
$ cd ignorerepo
Check including subincludes
$ hg revert -q --all
$ hg purge --all --config extensions.purge=
$ echo ".hgignore" > .hgignore
$ mkdir dir1 dir2
$ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
$ echo "subinclude:dir2/.hgignore" >> .hgignore
$ echo "glob:file*2" > dir2/.hgignore
$ hg status
? dir1/file1
? dir1/file2
? dir2/file1
Check including subincludes with regexs
$ echo "subinclude:dir1/.hgignore" >> .hgignore
$ echo "regexp:f.le1" > dir1/.hgignore
$ hg status
? dir1/file2
? dir2/file1
Check multiple levels of sub-ignores
$ mkdir dir1/subdir
$ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
$ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
$ echo "glob:subfil*3" >> dir1/subdir/.hgignore
$ hg status
? dir1/file2
? dir1/subdir/subfile4
? dir2/file1
Check include subignore at the same level
$ mv dir1/subdir/.hgignore dir1/.hgignoretwo
$ echo "regexp:f.le1" > dir1/.hgignore
$ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
$ echo "glob:file*2" > dir1/.hgignoretwo
$ hg status | grep file2
[1]
$ hg debugignore dir1/file2
dir1/file2 is ignored
(ignore rule in dir2/.hgignore, line 1: 'file*2')
#if windows
Windows paths are accepted on input
$ rm dir1/.hgignore
$ echo "dir1/file*" >> .hgignore
$ hg debugignore "dir1\file2"
dir1\file2 is ignored
(ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
$ hg up -qC .
#endif