hgext/fetch.py

revset: add destination() predicate

This predicate is used to find csets that were created because of a graft,
transplant or rebase --keep.  An optional revset can be supplied, in which case
the result will be limited to those copies which specified one of the revs as
the source for the command.

    hg log -r destination()                 # csets copied from anywhere
    hg log -r destination(branch(default))  # all csets copied from default

    hg log -r origin(x) or destination(origin(x))  # all instances of x

This predicate will follow a cset through different types of copies.  Given a
repo with a cset 'S' that is grafted to create G(S), which itself is
transplanted to become T(G(S)):

    o-S
   /
  o-o-G(S)
   \
    o-T(G(S))

    hg log -r destination( S )    # { G(S), T(G(S)) }
    hg log -r destination( G(S) ) # { T(G(S)) }

The implementation differences between the three different copy commands (see
the origin() predicate) are not intentionally exposed, however if the
transplant was a graft instead:

	hg log -r destination( G(S) )   # {}

because the 'extra' field in G(G(S)) is S, not G(S).  The implementation cannot
correct this by following sources before G(S) and then select the csets that
reference those sources because the cset provided to the predicate would also
end up selected.  If there were more than two copies, sources of the argument
would also get selected.

Note that the convert extension does not currently update the 'extra' map in its
destination csets, and therefore copies made prior to the convert will be
missing from the resulting set.

Instead of the loop over 'subset', the following almost works, but does not
select a transplant of a transplant.  That is, 'destination(S)' will only
select T(S).

    dests = set([r for r in subset if _getrevsource(repo, r) in args])

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from mercurial.i18n import _
from mercurial.node import nullid, short
from mercurial import commands, cmdutil, hg, util, error
from mercurial.lock import release

testedwith = 'internal'

def fetch(ui, repo, source='default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    parent, p2 = repo.dirstate.parents()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise util.Abort(_('working dir not at branch tip '
                           '(use "hg update" to check out branch tip)'))

    if p2 != nullid:
        raise util.Abort(_('outstanding uncommitted merge'))

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()
        mod, add, rem, del_ = repo.status()[:4]

        if mod or add or rem:
            raise util.Abort(_('outstanding uncommitted changes'))
        if del_:
            raise util.Abort(_('working directory is missing some files'))
        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise util.Abort(_('multiple heads in this branch '
                               '(use "hg heads ." and "hg merge" to merge)'))

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(_('pulling from %s\n') %
                  util.hidepassword(ui.expandpath(source)))
        revs = None
        if opts['rev']:
            try:
                revs = [other.lookup(rev) for rev in opts['rev']]
            except error.CapabilityError:
                err = _("other repository doesn't support revision lookup, "
                        "so a rev cannot be specified.")
                raise util.Abort(err)

        # Are there any changes at all?
        modheads = repo.pull(other, heads=revs)
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(_('not merging with %d other new branch heads '
                        '(use "hg heads ." and "hg merge" to merge them)\n') %
                      (len(newheads) - 1))
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts['switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(_('updating to %d:%s\n') %
                          (repo.changelog.rev(firstparent),
                           short(firstparent)))
            hg.clean(repo, firstparent)
            ui.status(_('merging with %d:%s\n') %
                      (repo.changelog.rev(secondparent), short(secondparent)))
            err = hg.merge(repo, secondparent, remind=False)

        if not err:
            # we don't translate commit messages
            message = (cmdutil.logmessage(ui, opts) or
                       ('Automated merge with %s' %
                        util.removeauth(other.url())))
            editor = cmdutil.commiteditor
            if opts.get('force_editor') or opts.get('edit'):
                editor = cmdutil.commitforceeditor
            n = repo.commit(message, opts['user'], opts['date'], editor=editor)
            ui.status(_('new changeset %d:%s merges remote changes '
                        'with local\n') % (repo.changelog.rev(n),
                                           short(n)))

        return err

    finally:
        release(lock, wlock)

cmdtable = {
    'fetch':
        (fetch,
        [('r', 'rev', [],
          _('a specific revision you would like to pull'), _('REV')),
         ('e', 'edit', None, _('edit commit message')),
         ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
         ('', 'switch-parent', None, _('switch parents when merging')),
        ] + commands.commitopts + commands.commitopts2 + commands.remoteopts,
        _('hg fetch [SOURCE]')),
}