testing: add interface unit tests for file storage
Our strategy for supporting alternate storage backends is to define
interfaces for everything then "code to the interface."
We already have interfaces for various primitives, including file
and manifest storage.
What we don't have is generic unit tests for those interfaces. Up
to this point we've been relying on high-level integration tests
(mainly in the form of existing .t tests) to test alternate storage
backends. And my experience with developing the "simple store" test
extension is that such testing is very tedious: it takes several
minutes to run all tests and when you find a failure, it is often
non-trivial to debug.
This commit starts to change that.
This commit introduces the mercurial.testing.storage module. It
contains testing code for storage. Currently, it defines some
unittest.TestCase classes for testing the file storage interfaces.
It also defines some factory functions that allow a caller to easily
spawn a custom TestCase "bound" to a specific file storage backend
implementation.
A new .py test has been added. It simply defines a callable to produce
filelog and transaction instances on demand and then "registers" the
various test classes so the filelog class can be tested with the
storage interface unit tests.
As part of writing the tests, I identified a couple of apparent
bugs in revlog.py and filelog.py! These are tracked with inline
TODO comments.
Writing the tests makes it more obvious where the storage interface
is lacking. For example, we raise either IndexError or
error.LookupError for missing revisions depending on whether we
use an integer revision or a node. Also, we raise error.RevlogError
in various places when we should be raising a storage-agnostic
error type.
The storage interfaces are currently far from perfect and there is much
work to be done to improve them. But at least with this commit we
finally have the start of unit tests that can be used to "qualify"
the behavior of a storage backend. And when implementing and debugging
new storage backends, we now have an obvious place to define new
tests and have obvious places to insert breakpoints to facilitate
debugging. This should be invaluable when implementing new storage
backends.
I added the mercurial.testing package because these interface
conformance tests are generic and need to be usable by all storage
backends. Having the code live in tests/ would make it difficult for
storage backends implemented in extensions to test their interface
conformance. First, it would require obtaining a copy of Mercurial's
storage test code in order to test. Second, it would make testing
against multiple Mercurial versions difficult, as you would need to
import N copies of the storage testing code in order to achieve test
coverage. By making the test code part of the Mercurial distribution
itself, extensions can `import mercurial.testing.*` to access and run
the test code. The test will run against whatever Mercurial version
is active.
FWIW I've always wanted to move parts of run-tests.py into the
mercurial.* package to make the testing story simpler (e.g. imagine an
`hg debugruntests` command that could invoke the test harness). While I
have no plans to do that in the near future, establishing the
mercurial.testing package does provide a natural home for that code
should someone do this in the future.
Differential Revision: https://phab.mercurial-scm.org/D4650
# If you want to change PREFIX, do not just edit it below. The changed
# value wont get passed on to recursive make calls. You should instead
# override the variable on the command like:
#
# % make PREFIX=/opt/ install
export PREFIX=/usr/local
PYTHON=python
$(eval HGROOT := $(shell pwd))
HGPYTHONS ?= $(HGROOT)/build/pythons
PURE=
PYFILESCMD=find mercurial hgext doc -name '*.py'
PYFILES:=$(shell $(PYFILESCMD))
DOCFILES=mercurial/help/*.txt
export LANGUAGE=C
export LC_ALL=C
TESTFLAGS ?= $(shell echo $$HGTESTFLAGS)
OSXVERSIONFLAGS ?= $(shell echo $$OSXVERSIONFLAGS)
# Set this to e.g. "mingw32" to use a non-default compiler.
COMPILER=
COMPILERFLAG_tmp_ =
COMPILERFLAG_tmp_${COMPILER} ?= -c $(COMPILER)
COMPILERFLAG=${COMPILERFLAG_tmp_${COMPILER}}
help:
@echo 'Commonly used make targets:'
@echo ' all - build program and documentation'
@echo ' install - install program and man pages to $$PREFIX ($(PREFIX))'
@echo ' install-home - install with setup.py install --home=$$HOME ($(HOME))'
@echo ' local - build for inplace usage'
@echo ' tests - run all tests in the automatic test suite'
@echo ' test-foo - run only specified tests (e.g. test-merge1.t)'
@echo ' dist - run all tests and create a source tarball in dist/'
@echo ' clean - remove files created by other targets'
@echo ' (except installed files or dist source tarball)'
@echo ' update-pot - update i18n/hg.pot'
@echo
@echo 'Example for a system-wide installation under /usr/local:'
@echo ' make all && su -c "make install" && hg version'
@echo
@echo 'Example for a local installation (usable in this directory):'
@echo ' make local && ./hg version'
all: build doc
local:
$(PYTHON) setup.py $(PURE) \
build_py -c -d . \
build_ext $(COMPILERFLAG) -i \
build_hgexe $(COMPILERFLAG) -i \
build_mo
env HGRCPATH= $(PYTHON) hg version
build:
$(PYTHON) setup.py $(PURE) build $(COMPILERFLAG)
wheel:
FORCE_SETUPTOOLS=1 $(PYTHON) setup.py $(PURE) bdist_wheel $(COMPILERFLAG)
doc:
$(MAKE) -C doc
cleanbutpackages:
-$(PYTHON) setup.py clean --all # ignore errors from this command
find contrib doc hgext hgext3rd i18n mercurial tests hgdemandimport \
\( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';'
rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err
rm -f mercurial/__modulepolicy__.py
if test -d .hg; then rm -f mercurial/__version__.py; fi
rm -rf build mercurial/locale
$(MAKE) -C doc clean
$(MAKE) -C contrib/chg distclean
clean: cleanbutpackages
rm -rf packages
install: install-bin install-doc
install-bin: build
$(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force
install-doc: doc
cd doc && $(MAKE) $(MFLAGS) install
install-home: install-home-bin install-home-doc
install-home-bin: build
$(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force
install-home-doc: doc
cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install
MANIFEST-doc:
$(MAKE) -C doc MANIFEST
MANIFEST.in: MANIFEST-doc
hg manifest | sed -e 's/^/include /' > MANIFEST.in
echo include mercurial/__version__.py >> MANIFEST.in
sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in
dist: tests dist-notests
dist-notests: doc MANIFEST.in
TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist
check: tests
tests:
cd tests && $(PYTHON) run-tests.py $(TESTFLAGS)
test-%:
cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@
testpy-%:
@echo Looking for Python $* in $(HGPYTHONS)
[ -e $(HGPYTHONS)/$*/bin/python ] || ( \
cd $$(mktemp --directory --tmpdir) && \
$(MAKE) -f $(HGROOT)/contrib/Makefile.python PYTHONVER=$* PREFIX=$(HGPYTHONS)/$* python )
cd tests && $(HGPYTHONS)/$*/bin/python run-tests.py $(TESTFLAGS)
check-code:
hg manifest | xargs python contrib/check-code.py
format-c:
clang-format --style file -i \
`hg files 'set:(**.c or **.cc or **.h) and not "listfile:contrib/clang-format-ignorelist"'`
update-pot: i18n/hg.pot
i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext
$(PYTHON) i18n/hggettext mercurial/commands.py \
hgext/*.py hgext/*/__init__.py \
mercurial/fileset.py mercurial/revset.py \
mercurial/templatefilters.py \
mercurial/templatefuncs.py \
mercurial/templatekw.py \
mercurial/filemerge.py \
mercurial/hgweb/webcommands.py \
mercurial/util.py \
$(DOCFILES) > i18n/hg.pot.tmp
# All strings marked for translation in Mercurial contain
# ASCII characters only. But some files contain string
# literals like this '\037\213'. xgettext thinks it has to
# parse them even though they are not marked for translation.
# Extracting with an explicit encoding of ISO-8859-1 will make
# xgettext "parse" and ignore them.
$(PYFILESCMD) | xargs \
xgettext --package-name "Mercurial" \
--msgid-bugs-address "<mercurial-devel@mercurial-scm.org>" \
--copyright-holder "Matt Mackall <mpm@selenic.com> and others" \
--from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \
-d hg -p i18n -o hg.pot.tmp
$(PYTHON) i18n/posplit i18n/hg.pot.tmp
# The target file is not created before the last step. So it never is in
# an intermediate state.
mv -f i18n/hg.pot.tmp i18n/hg.pot
%.po: i18n/hg.pot
# work on a temporary copy for never having a half completed target
cp $@ $@.tmp
msgmerge --no-location --update $@.tmp $^
mv -f $@.tmp $@
# Packaging targets
packaging_targets := \
centos5 \
centos6 \
centos7 \
deb \
docker-centos5 \
docker-centos6 \
docker-centos7 \
docker-debian-jessie \
docker-debian-stretch \
docker-fedora20 \
docker-fedora21 \
docker-fedora28 \
docker-ubuntu-trusty \
docker-ubuntu-trusty-ppa \
docker-ubuntu-xenial \
docker-ubuntu-xenial-ppa \
docker-ubuntu-artful \
docker-ubuntu-artful-ppa \
docker-ubuntu-bionic \
docker-ubuntu-bionic-ppa \
fedora20 \
fedora21 \
fedora28 \
linux-wheels \
linux-wheels-x86_64 \
linux-wheels-i686 \
ppa
# Forward packaging targets for convenience.
$(packaging_targets):
$(MAKE) -C contrib/packaging $@
osx:
rm -rf build/mercurial
/usr/bin/python2.7 setup.py install --optimize=1 \
--root=build/mercurial/ --prefix=/usr/local/ \
--install-lib=/Library/Python/2.7/site-packages/
make -C doc all install DESTDIR="$(PWD)/build/mercurial/"
# Place a bogon .DS_Store file in the target dir so we can be
# sure it doesn't get included in the final package.
touch build/mercurial/.DS_Store
# install zsh completions - this location appears to be
# searched by default as of macOS Sierra.
install -d build/mercurial/usr/local/share/zsh/site-functions/
install -m 0644 contrib/zsh_completion build/mercurial/usr/local/share/zsh/site-functions/_hg
# install bash completions - there doesn't appear to be a
# place that's searched by default for bash, so we'll follow
# the lead of Apple's git install and just put it in a
# location of our own.
install -d build/mercurial/usr/local/hg/contrib/
install -m 0644 contrib/bash_completion build/mercurial/usr/local/hg/contrib/hg-completion.bash
make -C contrib/chg \
HGPATH=/usr/local/bin/hg \
PYTHON=/usr/bin/python2.7 \
HGEXTDIR=/Library/Python/2.7/site-packages/hgext \
DESTDIR=../../build/mercurial \
PREFIX=/usr/local \
clean install
mkdir -p $${OUTPUTDIR:-dist}
HGVER=$$(python contrib/genosxversion.py $(OSXVERSIONFLAGS) build/mercurial/Library/Python/2.7/site-packages/mercurial/__version__.py) && \
OSXVER=$$(sw_vers -productVersion | cut -d. -f1,2) && \
pkgbuild --filter \\.DS_Store --root build/mercurial/ \
--identifier org.mercurial-scm.mercurial \
--version "$${HGVER}" \
build/mercurial.pkg && \
productbuild --distribution contrib/packaging/macosx/distribution.xml \
--package-path build/ \
--version "$${HGVER}" \
--resources contrib/packaging/macosx/ \
"$${OUTPUTDIR:-dist/}"/Mercurial-"$${HGVER}"-macosx"$${OSXVER}".pkg
.PHONY: help all local build doc cleanbutpackages clean install install-bin \
install-doc install-home install-home-bin install-home-doc \
dist dist-notests check tests check-code format-c update-pot \
$(packaging_targets) \
osx