view tests/test-dispatch.t @ 39788:ae531f5e583c

testing: add interface unit tests for file storage

Our strategy for supporting alternate storage backends is to define
interfaces for everything then "code to the interface."

We already have interfaces for various primitives, including file
and manifest storage.

What we don't have is generic unit tests for those interfaces. Up
to this point we've been relying on high-level integration tests
(mainly in the form of existing .t tests) to test alternate storage
backends. And my experience with developing the "simple store" test
extension is that such testing is very tedious: it takes several
minutes to run all tests and when you find a failure, it is often
non-trivial to debug.

This commit starts to change that.

This commit introduces the mercurial.testing.storage module. It
contains testing code for storage. Currently, it defines some
unittest.TestCase classes for testing the file storage interfaces.
It also defines some factory functions that allow a caller to easily
spawn a custom TestCase "bound" to a specific file storage backend
implementation.

A new .py test has been added. It simply defines a callable to produce
filelog and transaction instances on demand and then "registers" the
various test classes so the filelog class can be tested with the
storage interface unit tests.

As part of writing the tests, I identified a couple of apparent
bugs in revlog.py and filelog.py! These are tracked with inline
TODO comments.

Writing the tests makes it more obvious where the storage interface
is lacking. For example, we raise either IndexError or
error.LookupError for missing revisions depending on whether we
use an integer revision or a node. Also, we raise error.RevlogError
in various places when we should be raising a storage-agnostic
error type.

The storage interfaces are currently far from perfect and there is much
work to be done to improve them. But at least with this commit we
finally have the start of unit tests that can be used to "qualify"
the behavior of a storage backend. And when implementing and debugging
new storage backends, we now have an obvious place to define new
tests and have obvious places to insert breakpoints to facilitate
debugging. This should be invaluable when implementing new storage
backends.

I added the mercurial.testing package because these interface
conformance tests are generic and need to be usable by all storage
backends. Having the code live in tests/ would make it difficult for
storage backends implemented in extensions to test their interface
conformance. First, it would require obtaining a copy of Mercurial's
storage test code in order to test. Second, it would make testing
against multiple Mercurial versions difficult, as you would need to
import N copies of the storage testing code in order to achieve test
coverage. By making the test code part of the Mercurial distribution
itself, extensions can `import mercurial.testing.*` to access and run
the test code. The test will run against whatever Mercurial version
is active.

FWIW I've always wanted to move parts of run-tests.py into the
mercurial.* package to make the testing story simpler (e.g. imagine an
`hg debugruntests` command that could invoke the test harness). While I
have no plans to do that in the near future, establishing the
mercurial.testing package does provide a natural home for that code
should someone do this in the future.

Differential Revision: https://phab.mercurial-scm.org/D4650

test command parsing and dispatch

  $ hg init a
  $ cd a

Redundant options used to crash (issue436):
  $ hg -v log -v
  $ hg -v log -v x

  $ echo a > a
  $ hg ci -Ama
  adding a

Missing arg:

  $ hg cat
  hg cat: invalid arguments
  hg cat [OPTION]... FILE...
  
  output the current or given revision of files
  
  options ([+] can be repeated):
  
   -o --output FORMAT       print output to file with formatted name
   -r --rev REV             print the given revision
      --decode              apply any matching decode filter
   -I --include PATTERN [+] include names matching the given patterns
   -X --exclude PATTERN [+] exclude names matching the given patterns
  
  (use 'hg cat -h' to show more help)
  [255]

Missing parameter for early option:

  $ hg log -R 2>&1 | grep 'hg log'
  hg log: option -R requires argument
  hg log [OPTION]... [FILE]
  (use 'hg log -h' to show more help)

"--" may be an option value:

  $ hg -R -- log
  abort: repository -- not found!
  [255]
  $ hg log -R --
  abort: repository -- not found!
  [255]
  $ hg log -T --
  -- (no-eol)
  $ hg log -T -- -k nomatch

Parsing of early options should stop at "--":

  $ hg cat -- --config=hooks.pre-cat=false
  --config=hooks.pre-cat=false: no such file in rev cb9a9f314b8b
  [1]
  $ hg cat -- --debugger
  --debugger: no such file in rev cb9a9f314b8b
  [1]

Unparsable form of early options:

  $ hg cat --debugg
  abort: option --debugger may not be abbreviated!
  [255]

Parsing failure of early options should be detected before executing the
command:

  $ hg log -b '--config=hooks.pre-log=false' default
  abort: option --config may not be abbreviated!
  [255]
  $ hg log -b -R. default
  abort: option -R has to be separated from other options (e.g. not -qR) and --repository may only be abbreviated as --repo!
  [255]
  $ hg log --cwd .. -b --cwd=. default
  abort: option --cwd may not be abbreviated!
  [255]

However, we can't prevent it from loading extensions and configs:

  $ cat <<EOF > bad.py
  > raise Exception('bad')
  > EOF
  $ hg log -b '--config=extensions.bad=bad.py' default
  *** failed to import extension bad from bad.py: bad
  abort: option --config may not be abbreviated!
  [255]

  $ mkdir -p badrepo/.hg
  $ echo 'invalid-syntax' > badrepo/.hg/hgrc
  $ hg log -b -Rbadrepo default
  hg: parse error at badrepo/.hg/hgrc:1: invalid-syntax
  [255]

  $ hg log -b --cwd=inexistent default
  abort: $ENOENT$: 'inexistent'
  [255]

  $ hg log -b '--config=ui.traceback=yes' 2>&1 | grep '^Traceback'
  Traceback (most recent call last):
  $ hg log -b '--config=profiling.enabled=yes' 2>&1 | grep -i sample
  Sample count: .*|No samples recorded\. (re)

Early options can't be specified in [aliases] and [defaults] because they are
applied before the command name is resolved:

  $ hg log -b '--config=alias.log=log --config=hooks.pre-log=false'
  hg log: option -b not recognized
  error in definition for alias 'log': --config may only be given on the command
  line
  [255]

  $ hg log -b '--config=defaults.log=--config=hooks.pre-log=false'
  abort: option --config may not be abbreviated!
  [255]

Shell aliases bypass any command parsing rules but for the early one:

  $ hg log -b '--config=alias.log=!echo howdy'
  howdy

Early options must come first if HGPLAIN=+strictflags is specified:
(BUG: chg cherry-picks early options to pass them as a server command)

#if no-chg
  $ HGPLAIN=+strictflags hg log -b --config='hooks.pre-log=false' default
  abort: unknown revision '--config=hooks.pre-log=false'!
  [255]
  $ HGPLAIN=+strictflags hg log -b -R. default
  abort: unknown revision '-R.'!
  [255]
  $ HGPLAIN=+strictflags hg log -b --cwd=. default
  abort: unknown revision '--cwd=.'!
  [255]
#endif
  $ HGPLAIN=+strictflags hg log -b --debugger default
  abort: unknown revision '--debugger'!
  [255]
  $ HGPLAIN=+strictflags hg log -b --config='alias.log=!echo pwned' default
  abort: unknown revision '--config=alias.log=!echo pwned'!
  [255]

  $ HGPLAIN=+strictflags hg log --config='hooks.pre-log=false' -b default
  abort: option --config may not be abbreviated!
  [255]
  $ HGPLAIN=+strictflags hg log -q --cwd=.. -b default
  abort: option --cwd may not be abbreviated!
  [255]
  $ HGPLAIN=+strictflags hg log -q -R . -b default
  abort: option -R has to be separated from other options (e.g. not -qR) and --repository may only be abbreviated as --repo!
  [255]

  $ HGPLAIN=+strictflags hg --config='hooks.pre-log=false' log -b default
  abort: pre-log hook exited with status 1
  [255]
  $ HGPLAIN=+strictflags hg --cwd .. -q -Ra log -b default
  0:cb9a9f314b8b
  $ HGPLAIN=+strictflags hg --cwd .. -q --repository a log -b default
  0:cb9a9f314b8b
  $ HGPLAIN=+strictflags hg --cwd .. -q --repo a log -b default
  0:cb9a9f314b8b

For compatibility reasons, HGPLAIN=+strictflags is not enabled by plain HGPLAIN:

  $ HGPLAIN= hg log --config='hooks.pre-log=false' -b default
  abort: pre-log hook exited with status 1
  [255]
  $ HGPLAINEXCEPT= hg log --cwd .. -q -Ra -b default
  0:cb9a9f314b8b

[defaults]

  $ hg cat a
  a
  $ cat >> $HGRCPATH <<EOF
  > [defaults]
  > cat = -r null
  > EOF
  $ hg cat a
  a: no such file in rev 000000000000
  [1]

  $ cd "$TESTTMP"

OSError "No such file or directory" / "The system cannot find the path
specified" should include filename even when it is empty

  $ hg -R a archive ''
  abort: *: '' (glob)
  [255]

#if no-outer-repo

No repo:

  $ hg cat
  abort: no repository found in '$TESTTMP' (.hg not found)!
  [255]

#endif

#if rmcwd

Current directory removed:

  $ mkdir $TESTTMP/repo1
  $ cd $TESTTMP/repo1
  $ rm -rf $TESTTMP/repo1

The output could be one of the following and something else:
 chg: abort: failed to getcwd (errno = *) (glob)
 abort: error getting current working directory: * (glob)
 sh: 0: getcwd() failed: $ENOENT$
Since the exact behavior depends on the shell, only check it returns non-zero.
  $ HGDEMANDIMPORT=disable hg version -q 2>/dev/null || false
  [1]

#endif