view tests/test-http-bad-server.t @ 39788:ae531f5e583c

testing: add interface unit tests for file storage

Our strategy for supporting alternate storage backends is to define
interfaces for everything then "code to the interface."

We already have interfaces for various primitives, including file
and manifest storage.

What we don't have is generic unit tests for those interfaces. Up
to this point we've been relying on high-level integration tests
(mainly in the form of existing .t tests) to test alternate storage
backends. And my experience with developing the "simple store" test
extension is that such testing is very tedious: it takes several
minutes to run all tests and when you find a failure, it is often
non-trivial to debug.

This commit starts to change that.

This commit introduces the mercurial.testing.storage module. It
contains testing code for storage. Currently, it defines some
unittest.TestCase classes for testing the file storage interfaces.
It also defines some factory functions that allow a caller to easily
spawn a custom TestCase "bound" to a specific file storage backend
implementation.

A new .py test has been added. It simply defines a callable to produce
filelog and transaction instances on demand and then "registers" the
various test classes so the filelog class can be tested with the
storage interface unit tests.

As part of writing the tests, I identified a couple of apparent
bugs in revlog.py and filelog.py! These are tracked with inline
TODO comments.

Writing the tests makes it more obvious where the storage interface
is lacking. For example, we raise either IndexError or
error.LookupError for missing revisions depending on whether we
use an integer revision or a node. Also, we raise error.RevlogError
in various places when we should be raising a storage-agnostic
error type.

The storage interfaces are currently far from perfect and there is much
work to be done to improve them. But at least with this commit we
finally have the start of unit tests that can be used to "qualify"
the behavior of a storage backend. And when implementing and debugging
new storage backends, we now have an obvious place to define new
tests and have obvious places to insert breakpoints to facilitate
debugging. This should be invaluable when implementing new storage
backends.

I added the mercurial.testing package because these interface
conformance tests are generic and need to be usable by all storage
backends. Having the code live in tests/ would make it difficult for
storage backends implemented in extensions to test their interface
conformance. First, it would require obtaining a copy of Mercurial's
storage test code in order to test. Second, it would make testing
against multiple Mercurial versions difficult, as you would need to
import N copies of the storage testing code in order to achieve test
coverage. By making the test code part of the Mercurial distribution
itself, extensions can `import mercurial.testing.*` to access and run
the test code. The test will run against whatever Mercurial version
is active.

FWIW I've always wanted to move parts of run-tests.py into the
mercurial.* package to make the testing story simpler (e.g. imagine an
`hg debugruntests` command that could invoke the test harness). While I
have no plans to do that in the near future, establishing the
mercurial.testing package does provide a natural home for that code
should someone do this in the future.

Differential Revision: https://phab.mercurial-scm.org/D4650

#require serve zstd

Client version is embedded in HTTP request and is effectively dynamic. Pin the
version so behavior is deterministic.

  $ cat > fakeversion.py << EOF
  > from mercurial import util
  > util.version = lambda: '4.2'
  > EOF

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > fakeversion = `pwd`/fakeversion.py
  > [devel]
  > legacy.exchange = phases
  > EOF

  $ hg init server0
  $ cd server0
  $ touch foo
  $ hg -q commit -A -m initial

Also disable compression because zstd is optional and causes output to vary
and because debugging partial responses is hard when compression is involved

  $ cat > .hg/hgrc << EOF
  > [extensions]
  > badserver = $TESTDIR/badserverext.py
  > [server]
  > compressionengines = none
  > EOF

Failure to accept() socket should result in connection related error message

  $ hg serve --config badserver.closebeforeaccept=true -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: $ECONNRESET$
  [255]

(The server exits on its own, but there is a race between that and starting a new server.
So ensure the process is dead.)

  $ killdaemons.py $DAEMON_PIDS

Failure immediately after accept() should yield connection related error message

  $ hg serve --config badserver.closeafteraccept=true -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS

TODO: this usually outputs good results, but sometimes emits abort:
error: '' on FreeBSD and OS X.
What we ideally want are:

abort: error: $ECONNRESET$

The flakiness in this output was observable easily with
--runs-per-test=20 on macOS 10.12 during the freeze for 4.2.
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: * (glob)
  [255]

  $ killdaemons.py $DAEMON_PIDS

Failure to read all bytes in initial HTTP request should yield connection related error message

  $ hg serve --config badserver.closeafterrecvbytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(1 from 65537) -> (1) G
  read limit reached; closing socket

  $ rm -f error.log

Same failure, but server reads full HTTP request line

  $ hg serve --config badserver.closeafterrecvbytes=40 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(40 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(7 from -1) -> (7) Accept-
  read limit reached; closing socket

  $ rm -f error.log

Failure on subsequent HTTP request on the same socket (cmd?batch)

  $ hg serve --config badserver.closeafterrecvbytes=210,223 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(210 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(177 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(150 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(115 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 450\r\n
  write(2) -> \r\n
  write(450) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(4? from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob)
  readline(1? from -1) -> (1?) Accept-Encoding* (glob)
  read limit reached; closing socket
  readline(223 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(197 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(170 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(141 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(100 from -1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(39 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(4 from -1) -> (4) host
  read limit reached; closing socket

  $ rm -f error.log

Failure to read getbundle HTTP request

  $ hg serve --config badserver.closeafterrecvbytes=308,317,304 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(1 from -1) -> (1) x (?)
  readline(1 from -1) -> (1) x (?)
  readline(308 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(275 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(248 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(213 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 450\r\n
  write(2) -> \r\n
  write(450) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(13? from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob)
  readline(1?? from -1) -> (27) Accept-Encoding: identity\r\n (glob)
  readline(8? from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob)
  readline(5? from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob)
  readline(1? from -1) -> (1?) x-hgproto-1:* (glob)
  read limit reached; closing socket
  readline(317 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(291 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(264 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(235 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(194 from -1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(133 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(98 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(20) -> Content-Length: 42\r\n
  write(2) -> \r\n
  write(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(* from 65537) -> (*) GET /?cmd=getbundle HTTP* (glob)
  read limit reached; closing socket
  readline(304 from 65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(274 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(247 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(218 from -1) -> (218) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtag
  read limit reached; closing socket

  $ rm -f error.log

Now do a variation using POST to send arguments

  $ hg serve --config experimental.httppostargs=true --config badserver.closeafterrecvbytes=329,344 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(329 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(296 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(269 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(234 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 463\r\n
  write(2) -> \r\n
  write(463) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx httppostargs known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(1?? from 65537) -> (27) POST /?cmd=batch HTTP/1.1\r\n (glob)
  readline(1?? from -1) -> (27) Accept-Encoding: identity\r\n (glob)
  readline(1?? from -1) -> (41) content-type: application/mercurial-0.1\r\n (glob)
  readline(6? from -1) -> (33) vary: X-HgArgs-Post,X-HgProto-1\r\n (glob)
  readline(3? from -1) -> (19) x-hgargs-post: 28\r\n (glob)
  readline(1? from -1) -> (1?) x-hgproto-1: * (glob)
  read limit reached; closing socket
  readline(344 from 65537) -> (27) POST /?cmd=batch HTTP/1.1\r\n
  readline(317 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(290 from -1) -> (41) content-type: application/mercurial-0.1\r\n
  readline(249 from -1) -> (33) vary: X-HgArgs-Post,X-HgProto-1\r\n
  readline(216 from -1) -> (19) x-hgargs-post: 28\r\n
  readline(197 from -1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(136 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(101 from -1) -> (20) content-length: 28\r\n
  readline(81 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  read(* from 28) -> (*) cmds=* (glob)
  read limit reached, closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Now move on to partial server responses

Server sends a single character from the HTTP response line

  $ hg serve --config badserver.closeaftersendbytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: H
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(1 from 36) -> (0) H
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends an incomplete capabilities response body

  $ hg serve --config badserver.closeaftersendbytes=180 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: HTTP request error (incomplete response; expected 450 bytes got 20)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (144) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (121) Server: badhttpserver\r\n
  write(37 from 37) -> (84) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (43) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (22) Content-Length: 450\r\n
  write(2 from 2) -> (20) \r\n
  write(20 from 450) -> (0) batch branchmap bund
  write limit reached; closing socket

  $ rm -f error.log

Server sends incomplete headers for batch request

  $ hg serve --config badserver.closeaftersendbytes=728 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO this output is horrible

  $ hg clone http://localhost:$HGPORT/ clone
  abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository:
  ---%<--- (applicat)
  
  ---%<---
  !
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (692) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (669) Server: badhttpserver\r\n
  write(37 from 37) -> (632) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (591) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (570) Content-Length: 450\r\n
  write(2 from 2) -> (568) \r\n
  write(450 from 450) -> (118) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (82) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (59) Server: badhttpserver\r\n
  write(37 from 37) -> (22) Date: $HTTP_DATE$\r\n
  write(22 from 41) -> (0) Content-Type: applicat
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends an incomplete HTTP response body to batch request

  $ hg serve --config badserver.closeaftersendbytes=793 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO client spews a stack due to uncaught ValueError in batch.results()
#if no-chg
  $ hg clone http://localhost:$HGPORT/ clone 2> /dev/null
  [1]
#else
  $ hg clone http://localhost:$HGPORT/ clone 2> /dev/null
  [255]
#endif

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (757) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (734) Server: badhttpserver\r\n
  write(37 from 37) -> (697) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (656) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (635) Content-Length: 450\r\n
  write(2 from 2) -> (633) \r\n
  write(450 from 450) -> (183) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (147) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (124) Server: badhttpserver\r\n
  write(37 from 37) -> (87) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (46) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (26) Content-Length: 42\r\n
  write(2 from 2) -> (24) \r\n
  write(24 from 42) -> (0) 96ee1d7354c4ad7372047672
  write limit reached; closing socket

  $ rm -f error.log

Server sends incomplete headers for getbundle response

  $ hg serve --config badserver.closeaftersendbytes=940 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO this output is terrible

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository:
  ---%<--- (application/mercuri)
  
  ---%<---
  !
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (904) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (881) Server: badhttpserver\r\n
  write(37 from 37) -> (844) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (803) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (782) Content-Length: 450\r\n
  write(2 from 2) -> (780) \r\n
  write(450 from 450) -> (330) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (294) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (271) Server: badhttpserver\r\n
  write(37 from 37) -> (234) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (193) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (173) Content-Length: 42\r\n
  write(2 from 2) -> (171) \r\n
  write(42 from 42) -> (129) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (461) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Arev-branch-cache%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (93) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (70) Server: badhttpserver\r\n
  write(37 from 37) -> (33) Date: $HTTP_DATE$\r\n
  write(33 from 41) -> (0) Content-Type: application/mercuri
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server stops before it sends transfer encoding

  $ hg serve --config badserver.closeaftersendbytes=973 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: stream ended unexpectedly (got 0 bytes, expected 1)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -4 error.log
  write(41 from 41) -> (25) Content-Type: application/mercurial-0.2\r\n
  write(25 from 28) -> (0) Transfer-Encoding: chunke
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends empty HTTP body for getbundle

  $ hg serve --config badserver.closeaftersendbytes=978 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (942) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (919) Server: badhttpserver\r\n
  write(37 from 37) -> (882) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (841) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (820) Content-Length: 450\r\n
  write(2 from 2) -> (818) \r\n
  write(450 from 450) -> (368) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (332) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (309) Server: badhttpserver\r\n
  write(37 from 37) -> (272) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (231) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (211) Content-Length: 42\r\n
  write(2 from 2) -> (209) \r\n
  write(42 from 42) -> (167) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (461) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Arev-branch-cache%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (131) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (108) Server: badhttpserver\r\n
  write(37 from 37) -> (71) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (30) Content-Type: application/mercurial-0.2\r\n
  write(28 from 28) -> (2) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (0) \r\n
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends partial compression string

  $ hg serve --config badserver.closeaftersendbytes=1002 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (966) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (943) Server: badhttpserver\r\n
  write(37 from 37) -> (906) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (865) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (844) Content-Length: 450\r\n
  write(2 from 2) -> (842) \r\n
  write(450 from 450) -> (392) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (356) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (333) Server: badhttpserver\r\n
  write(37 from 37) -> (296) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (255) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (235) Content-Length: 42\r\n
  write(2 from 2) -> (233) \r\n
  write(42 from 42) -> (191) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (461) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Arev-branch-cache%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (155) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (132) Server: badhttpserver\r\n
  write(37 from 37) -> (95) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (54) Content-Type: application/mercurial-0.2\r\n
  write(28 from 28) -> (26) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (24) \r\n
  write(6 from 6) -> (18) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (9) 4\r\nnone\r\n
  write(9 from 9) -> (0) 4\r\nHG20\r\n
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server sends partial bundle2 header magic

  $ hg serve --config badserver.closeaftersendbytes=999 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response; expected 4 bytes got 3)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -7 error.log
  write(28 from 28) -> (23) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (21) \r\n
  write(6 from 6) -> (15) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (6) 4\r\nnone\r\n
  write(6 from 9) -> (0) 4\r\nHG2
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server sends incomplete bundle2 stream params length

  $ hg serve --config badserver.closeaftersendbytes=1008 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response; expected 4 bytes got 3)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -8 error.log
  write(28 from 28) -> (32) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (30) \r\n
  write(6 from 6) -> (24) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (15) 4\r\nnone\r\n
  write(9 from 9) -> (6) 4\r\nHG20\r\n
  write(6 from 9) -> (0) 4\\r\\n\x00\x00\x00 (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Servers stops after bundle2 stream params header

  $ hg serve --config badserver.closeaftersendbytes=1011 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -8 error.log
  write(28 from 28) -> (35) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (33) \r\n
  write(6 from 6) -> (27) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (18) 4\r\nnone\r\n
  write(9 from 9) -> (9) 4\r\nHG20\r\n
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after bundle2 part header length

  $ hg serve --config badserver.closeaftersendbytes=1020 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -9 error.log
  write(28 from 28) -> (44) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (42) \r\n
  write(6 from 6) -> (36) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (27) 4\r\nnone\r\n
  write(9 from 9) -> (18) 4\r\nHG20\r\n
  write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after bundle2 part header

  $ hg serve --config badserver.closeaftersendbytes=1067 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -10 error.log
  write(28 from 28) -> (91) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (89) \r\n
  write(6 from 6) -> (83) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (74) 4\r\nnone\r\n
  write(9 from 9) -> (65) 4\r\nHG20\r\n
  write(9 from 9) -> (56) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (47) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (0) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops after bundle2 part payload chunk size

  $ hg serve --config badserver.closeaftersendbytes=1088 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response; expected 466 bytes got 7)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -11 error.log
  write(2 from 2) -> (110) \r\n
  write(6 from 6) -> (104) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (95) 4\r\nnone\r\n
  write(9 from 9) -> (86) 4\r\nHG20\r\n
  write(9 from 9) -> (77) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (68) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (21) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (12) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(12 from 473) -> (0) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1d (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending in middle of bundle2 payload chunk

  $ hg serve --config badserver.closeaftersendbytes=1549 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -12 error.log
  write(28 from 28) -> (573) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (571) \r\n
  write(6 from 6) -> (565) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (556) 4\r\nnone\r\n
  write(9 from 9) -> (547) 4\r\nHG20\r\n
  write(9 from 9) -> (538) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (529) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (482) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (473) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (0) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after 0 length payload chunk size

  $ hg serve --config badserver.closeaftersendbytes=1580 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response; expected 32 bytes got 9)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -13 error.log
  write(6 from 6) -> (596) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (587) 4\r\nnone\r\n
  write(9 from 9) -> (578) 4\r\nHG20\r\n
  write(9 from 9) -> (569) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (560) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (513) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (504) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (31) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (22) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (13) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(13 from 38) -> (0) 20\\r\\n\x08LISTKEYS (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after 0 part bundle part header (indicating end of bundle2 payload)
This is before the 0 size chunked transfer part that signals end of HTTP response.

#  $ hg serve --config badserver.closeaftersendbytes=1755 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ hg serve --config badserver.closeaftersendbytes=1862 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 96ee1d7354c4
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py $DAEMON_PIDS

  $ tail -22 error.log
  write(9 from 9) -> (851) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (842) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (795) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (786) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (313) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (304) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (295) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(38 from 38) -> (257) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00	\x06namespacephases\\r\\n (esc)
  write(9 from 9) -> (248) 4\\r\\n\x00\x00\x00:\\r\\n (esc)
  write(64 from 64) -> (184) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c	1\npublishing	True\r\n
  write(9 from 9) -> (175) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (166) 4\\r\\n\x00\x00\x00#\\r\\n (esc)
  write(41 from 41) -> (125) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00		namespacebookmarks\\r\\n (esc)
  write(9 from 9) -> (116) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (107) 4\\r\\n\x00\x00\x00\x1d\\r\\n (esc)
  write(35 from 35) -> (72) 1d\\r\\n\x16cache:rev-branch-cache\x00\x00\x00\x03\x00\x00\\r\\n (esc)
  write(9 from 9) -> (63) 4\\r\\n\x00\x00\x00'\\r\\n (esc)
  write(45 from 45) -> (18) 27\\r\\n\x00\x00\x00\x07\x00\x00\x00\x01\x00\x00\x00\x00default\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\\r\\n (esc)
  write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log
  $ rm -rf clone

Server sends a size 0 chunked-transfer size without terminating \r\n

  $ hg serve --config badserver.closeaftersendbytes=1865 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 96ee1d7354c4
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py $DAEMON_PIDS

  $ tail -23 error.log
  write(9 from 9) -> (854) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (845) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (798) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (789) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (316) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (307) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (298) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(38 from 38) -> (260) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00	\x06namespacephases\\r\\n (esc)
  write(9 from 9) -> (251) 4\\r\\n\x00\x00\x00:\\r\\n (esc)
  write(64 from 64) -> (187) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c	1\npublishing	True\r\n
  write(9 from 9) -> (178) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (169) 4\\r\\n\x00\x00\x00#\\r\\n (esc)
  write(41 from 41) -> (128) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00		namespacebookmarks\\r\\n (esc)
  write(9 from 9) -> (119) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (110) 4\\r\\n\x00\x00\x00\x1d\\r\\n (esc)
  write(35 from 35) -> (75) 1d\\r\\n\x16cache:rev-branch-cache\x00\x00\x00\x03\x00\x00\\r\\n (esc)
  write(9 from 9) -> (66) 4\\r\\n\x00\x00\x00'\\r\\n (esc)
  write(45 from 45) -> (21) 27\\r\\n\x00\x00\x00\x07\x00\x00\x00\x01\x00\x00\x00\x00default\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\\r\\n (esc)
  write(9 from 9) -> (12) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (3) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(3 from 5) -> (0) 0\r\n
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log
  $ rm -rf clone