view tests/test-push.t @ 39788:ae531f5e583c

testing: add interface unit tests for file storage

Our strategy for supporting alternate storage backends is to define
interfaces for everything then "code to the interface."

We already have interfaces for various primitives, including file
and manifest storage.

What we don't have is generic unit tests for those interfaces. Up
to this point we've been relying on high-level integration tests
(mainly in the form of existing .t tests) to test alternate storage
backends. And my experience with developing the "simple store" test
extension is that such testing is very tedious: it takes several
minutes to run all tests and when you find a failure, it is often
non-trivial to debug.

This commit starts to change that.

This commit introduces the mercurial.testing.storage module. It
contains testing code for storage. Currently, it defines some
unittest.TestCase classes for testing the file storage interfaces.
It also defines some factory functions that allow a caller to easily
spawn a custom TestCase "bound" to a specific file storage backend
implementation.

A new .py test has been added. It simply defines a callable to produce
filelog and transaction instances on demand and then "registers" the
various test classes so the filelog class can be tested with the
storage interface unit tests.

As part of writing the tests, I identified a couple of apparent
bugs in revlog.py and filelog.py! These are tracked with inline
TODO comments.

Writing the tests makes it more obvious where the storage interface
is lacking. For example, we raise either IndexError or
error.LookupError for missing revisions depending on whether we
use an integer revision or a node. Also, we raise error.RevlogError
in various places when we should be raising a storage-agnostic
error type.

The storage interfaces are currently far from perfect and there is much
work to be done to improve them. But at least with this commit we
finally have the start of unit tests that can be used to "qualify"
the behavior of a storage backend. And when implementing and debugging
new storage backends, we now have an obvious place to define new
tests and have obvious places to insert breakpoints to facilitate
debugging. This should be invaluable when implementing new storage
backends.

I added the mercurial.testing package because these interface
conformance tests are generic and need to be usable by all storage
backends. Having the code live in tests/ would make it difficult for
storage backends implemented in extensions to test their interface
conformance. First, it would require obtaining a copy of Mercurial's
storage test code in order to test. Second, it would make testing
against multiple Mercurial versions difficult, as you would need to
import N copies of the storage testing code in order to achieve test
coverage. By making the test code part of the Mercurial distribution
itself, extensions can `import mercurial.testing.*` to access and run
the test code. The test will run against whatever Mercurial version
is active.

FWIW I've always wanted to move parts of run-tests.py into the
mercurial.* package to make the testing story simpler (e.g. imagine an
`hg debugruntests` command that could invoke the test harness). While I
have no plans to do that in the near future, establishing the
mercurial.testing package does provide a natural home for that code
should someone do this in the future.

Differential Revision: https://phab.mercurial-scm.org/D4650

==================================
Basic testing for the push command
==================================

Testing of the '--rev' flag
===========================

  $ hg init test-revflag
  $ hg -R test-revflag unbundle "$TESTDIR/bundles/remote.hg"
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 7 changes to 4 files (+1 heads)
  new changesets bfaf4b5cbf01:916f1afdef90 (9 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ for i in 0 1 2 3 4 5 6 7 8; do
  >    echo
  >    hg init test-revflag-"$i"
  >    hg -R test-revflag push -r "$i" test-revflag-"$i"
  >    hg -R test-revflag-"$i" verify
  > done
  
  pushing to test-revflag-0
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files
  
  pushing to test-revflag-1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 1 files
  
  pushing to test-revflag-2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 3 changesets with 3 changes to 1 files
  
  pushing to test-revflag-3
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 4 changesets with 4 changes to 1 files
  
  pushing to test-revflag-4
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 1 files
  
  pushing to test-revflag-5
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 3 changesets with 3 changes to 1 files
  
  pushing to test-revflag-6
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 5 changes to 2 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 4 changesets with 5 changes to 2 files
  
  pushing to test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 3 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 5 changesets with 6 changes to 3 files
  
  pushing to test-revflag-8
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 5 changes to 2 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 5 changesets with 5 changes to 2 files

  $ cd test-revflag-8

  $ hg pull ../test-revflag-7
  pulling from ../test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 2 changes to 3 files (+1 heads)
  new changesets c70afb1ee985:faa2e4234c7a
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 9 changesets with 7 changes to 4 files

  $ cd ..

Test server side validation during push
=======================================

  $ hg init test-validation
  $ cd test-validation

  $ cat > .hg/hgrc <<EOF
  > [server]
  > validate=1
  > EOF

  $ echo alpha > alpha
  $ echo beta > beta
  $ hg addr
  adding alpha
  adding beta
  $ hg ci -m 1

  $ cd ..
  $ hg clone test-validation test-validation-clone
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

#if reporevlogstore

Test spurious filelog entries:

  $ cd test-validation-clone
  $ echo blah >> beta
  $ cp .hg/store/data/beta.i tmp1
  $ hg ci -m 2
  $ cp .hg/store/data/beta.i tmp2
  $ hg -q rollback
  $ mv tmp2 .hg/store/data/beta.i
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'

Expected to fail:

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
   beta@1: dddc47b3ba30 not in manifests
  checked 2 changesets with 4 changes to 2 files
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: received spurious file revlog entry
  [255]

  $ hg -q rollback
  $ mv tmp1 .hg/store/data/beta.i
  $ echo beta > beta

Test missing filelog entries:

  $ cp .hg/store/data/beta.i tmp
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'
  $ mv tmp .hg/store/data/beta.i

Expected to fail:

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
   beta@1: manifest refers to unknown revision dddc47b3ba30
  checked 2 changesets with 2 changes to 2 files
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: missing file data for beta:dddc47b3ba30e54484720ce0f4f768a0f4b6efb9 - run hg verify
  [255]

  $ cd ..

#endif

Test push hook locking
=====================

  $ hg init 1

  $ echo '[ui]' >> 1/.hg/hgrc
  $ echo 'timeout = 10' >> 1/.hg/hgrc

  $ echo foo > 1/foo
  $ hg --cwd 1 ci -A -m foo
  adding foo

  $ hg clone 1 2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone 2 3
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cat <<EOF > $TESTTMP/debuglocks-pretxn-hook.sh
  > hg debuglocks
  > true
  > EOF
  $ echo '[hooks]' >> 2/.hg/hgrc
  $ echo "pretxnchangegroup.a = sh $TESTTMP/debuglocks-pretxn-hook.sh" >> 2/.hg/hgrc
  $ echo 'changegroup.push = hg push -qf ../1' >> 2/.hg/hgrc

  $ echo bar >> 3/foo
  $ hg --cwd 3 ci -m bar

  $ hg --cwd 3 push ../2 --config devel.legacy.exchange=bundle1
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  lock:  user *, process * (*s) (glob)
  wlock: free

  $ hg --cwd 1 --config extensions.strip= strip tip -q
  $ hg --cwd 2 --config extensions.strip= strip tip -q
  $ hg --cwd 3 push ../2 # bundle2+
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  lock:  user *, process * (*s) (glob)
  wlock: user *, process * (*s) (glob)

Test bare push with multiple race checking options
--------------------------------------------------

  $ hg init test-bare-push-no-concurrency
  $ hg init test-bare-push-unrelated-concurrency
  $ hg -R test-revflag push -r 0 test-bare-push-no-concurrency --config server.concurrent-push-mode=strict
  pushing to test-bare-push-no-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg -R test-revflag push -r 0 test-bare-push-unrelated-concurrency --config server.concurrent-push-mode=check-related
  pushing to test-bare-push-unrelated-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

SEC: check for unsafe ssh url

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = sh -c "read l; read l; read l"
  > EOF

  $ hg -R test-revflag push 'ssh://-oProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://%2DoProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://fakehost|touch${IFS}owned/path'
  pushing to ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
  abort: no suitable response from remote hg!
  [255]
  $ hg -R test-revflag push 'ssh://fakehost%7Ctouch%20owned/path'
  pushing to ssh://fakehost%7Ctouch%20owned/path
  abort: no suitable response from remote hg!
  [255]

  $ [ ! -f owned ] || echo 'you got owned'