repoview: separate concerns in _filteredrepotypes comment
The cited issue in Python bugtracker is closed, but hasn't been
fixed. We've been able to use the attached example and reproduce
it with Python 3.9.
The point where it turns from needless stress on the GC to
the an actual leak is when one factors in the fact that the GC
was before Python 3.4 unable to collect some types (see PEP 442).
Note that even with Python 2.7, the simple example of cycles
due to __mro__ are collectable. This was seen again with the
example attached on the CPython issue.
#require svn svn-bindings
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> EOF
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
$ SVNREPOPATH=`pwd`/svn-repo
$ SVNREPOURL="`"$PYTHON" $TESTDIR/svnurlof.py \"$SVNREPOPATH\"`"
Convert trunk and branches
$ hg convert --datesort "$SVNREPOURL"/subproject A-hg
initializing destination A-hg repository
scanning source...
sorting...
converting...
13 createtrunk
12 moved1
11 moved1
10 moved2
9 changeb and rm d2
8 changeb and rm d2
7 moved1again
6 moved1again
5 copyfilefrompast
4 copydirfrompast
3 add d3
2 copy dir and remove subdir
1 add d4old
0 rename d4old into d4new
$ cd A-hg
$ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
o 13 rename d4old into d4new files: d4new/g d4old/g
|
o 12 add d4old files: d4old/g
|
o 11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
|
o 10 add d3 files: d3/d31/e d3/f
|
o 9 copydirfrompast files: d2/d
|
o 8 copyfilefrompast files: d
|
o 7 moved1again files: d1/b d1/c
|
| o 6 moved1again files:
| |
o | 5 changeb and rm d2 files: d1/b d2/d
| |
| o 4 changeb and rm d2 files: b
| |
o | 3 moved2 files: d2/d
| |
o | 2 moved1 files: d1/b d1/c
| |
| o 1 moved1 files: b c
|
o 0 createtrunk files:
Check move copy records
$ hg st --rev 12:13 --copies
A d4new/g
d4old/g
R d4old/g
Check branches
$ hg branches
default 13:* (glob)
d1 6:* (glob)
$ cd ..
$ mkdir test-replace
$ cd test-replace
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"
Convert files being replaced by directories
$ hg convert svn-repo hg-repo
initializing destination hg-repo repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd hg-repo
Manifest before
$ hg -v manifest -r 1
644 a
644 d/b
644 d2/a
644 @ dlink
644 @ dlink2
644 dlink3
Manifest after clobber1
$ hg -v manifest -r 2
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 dlink3
Manifest after clobber2
$ hg -v manifest -r 3
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 @ dlink3
Manifest after clobberdir
$ hg -v manifest -r 6
644 a/b
644 d/b
644 d2/a
644 d2/c
644 dlink/b
644 @ dlink2
644 @ dlink3
Try updating
$ hg up -qC default
$ cd ..
Test convert progress bar
$ cat >> $HGRCPATH <<EOF
> [progress]
> assume-tty = 1
> delay = 0
> changedelay = 0
> format = topic bar number
> refresh = 0
> width = 60
> EOF
$ hg convert svn-repo hg-progress
\r (no-eol) (esc)
scanning [=====> ] 1/7\r (no-eol) (esc)
scanning [===========> ] 2/7\r (no-eol) (esc)
scanning [=================> ] 3/7\r (no-eol) (esc)
scanning [========================> ] 4/7\r (no-eol) (esc)
scanning [==============================> ] 5/7\r (no-eol) (esc)
scanning [====================================> ] 6/7\r (no-eol) (esc)
scanning [===========================================>] 7/7\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [ ] 0/7\r (no-eol) (esc)
getting files [=====> ] 1/6\r (no-eol) (esc)
getting files [============> ] 2/6\r (no-eol) (esc)
getting files [==================> ] 3/6\r (no-eol) (esc)
getting files [=========================> ] 4/6\r (no-eol) (esc)
getting files [===============================> ] 5/6\r (no-eol) (esc)
getting files [======================================>] 6/6\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=====> ] 1/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===========> ] 2/7\r (no-eol) (esc)
scanning paths [ ] 0/2\r (no-eol) (esc)
scanning paths [==================> ] 1/2\r (no-eol) (esc)
getting files [========> ] 1/4\r (no-eol) (esc)
getting files [==================> ] 2/4\r (no-eol) (esc)
getting files [============================> ] 3/4\r (no-eol) (esc)
getting files [======================================>] 4/4\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=================> ] 3/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=======================> ] 4/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=============================> ] 5/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===================================> ] 6/7\r (no-eol) (esc)
scanning paths [ ] 0/3\r (no-eol) (esc)
scanning paths [===========> ] 1/3\r (no-eol) (esc)
scanning paths [========================> ] 2/3\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
initializing destination hg-progress repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd ..