streamclone: support for producing and consuming stream clone bundles
Up to this point, stream clones only existed as a dynamically generated
data format produced and consumed during streaming clones. In order to
support this efficient cloning format with the clone bundles feature, we
need a more formal, on disk representation of the streaming clone data.
This patch introduces a new "bundle" type for streaming clones. Unlike
existing bundles, it does not contain changegroup data. It does,
however, share the same concepts like the 4 byte header which identifies
the type of data that follows and the 2 byte abbreviation for
compression types (of which only "UN" is currently supported).
The new bundle format is essentially the existing stream clone version 1
data format with some headers at the beginning.
Content negotiation at stream clone request time checked for repository
format/requirements compatibility before initiating a stream clone. We
can't do active content negotiation when using clone bundles. So, we put
this set of requirements inside the payload so consumers have a built-in
mechanism for checking compatibility before reading and applying lots of
data. Of course, we will also advertise this requirements set in clone
bundles. But that's for another patch.
We currently don't have a mechanism to produce and consume this new
bundle format. This will be implemented in upcoming patches.
It's worth noting that if a legacy client attempts to `hg unbundle` a
stream clone bundle (with the "HGS1" header), it will abort with:
"unknown bundle version S1," which seems appropriate.
#require svn13
$ svnupanddisplay()
> {
> (
> cd $1;
> svn up -q;
> svn st -v | sed 's/ */ /g' | sort
> limit=''
> if [ $2 -gt 0 ]; then
> limit="--limit=$2"
> fi
> svn log --xml -v $limit | python "$TESTDIR/svnxml.py"
> )
> }
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> EOF
$ hg init a
Add
$ echo a > a/a
$ mkdir -p a/d1/d2
$ echo b > a/d1/d2/b
$ hg --cwd a ci -d '0 0' -A -m 'add a file'
adding a
adding d1/d2/b
Modify
$ svn-safe-append.py a a/a
$ hg --cwd a ci -d '1 0' -m 'modify a file'
$ hg --cwd a tip -q
1:e0e2b8a9156b
$ hg convert -d svn a
assuming destination a-hg
initializing svn repository 'a-hg'
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
1 add a file
0 modify a file
$ svnupanddisplay a-hg-wc 2
2 1 test d1
2 1 test d1/d2 (glob)
2 1 test d1/d2/b (glob)
2 2 test .
2 2 test a
revision: 2
author: test
msg: modify a file
M /a
revision: 1
author: test
msg: add a file
A /a
A /d1
A /d1/d2
A /d1/d2/b
$ ls a a-hg-wc
a:
a
d1
a-hg-wc:
a
d1
$ cmp a/a a-hg-wc/a
Rename
$ hg --cwd a mv a b
$ hg --cwd a ci -d '2 0' -m 'rename a file'
$ hg --cwd a tip -q
2:eb5169441d43
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 rename a file
$ svnupanddisplay a-hg-wc 1
3 1 test d1
3 1 test d1/d2 (glob)
3 1 test d1/d2/b (glob)
3 3 test .
3 3 test b
revision: 3
author: test
msg: rename a file
D /a
A /b (from /a@2)
$ ls a a-hg-wc
a:
b
d1
a-hg-wc:
b
d1
Copy
$ hg --cwd a cp b c
$ hg --cwd a ci -d '3 0' -m 'copy a file'
$ hg --cwd a tip -q
3:60effef6ab48
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 copy a file
$ svnupanddisplay a-hg-wc 1
4 1 test d1
4 1 test d1/d2 (glob)
4 1 test d1/d2/b (glob)
4 3 test b
4 4 test .
4 4 test c
revision: 4
author: test
msg: copy a file
A /c (from /b@3)
$ ls a a-hg-wc
a:
b
c
d1
a-hg-wc:
b
c
d1
$ hg --cwd a rm b
Remove
$ hg --cwd a ci -d '4 0' -m 'remove a file'
$ hg --cwd a tip -q
4:87bbe3013fb6
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 remove a file
$ svnupanddisplay a-hg-wc 1
5 1 test d1
5 1 test d1/d2 (glob)
5 1 test d1/d2/b (glob)
5 4 test c
5 5 test .
revision: 5
author: test
msg: remove a file
D /b
$ ls a a-hg-wc
a:
c
d1
a-hg-wc:
c
d1
Executable
#if execbit
$ chmod +x a/c
#else
$ echo fake >> a/c
#endif
$ hg --cwd a ci -d '5 0' -m 'make a file executable'
#if execbit
$ hg --cwd a tip -q
5:ff42e473c340
#else
$ hg --cwd a tip -q
5:817a700c8cf1
#endif
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 make a file executable
$ svnupanddisplay a-hg-wc 1
6 1 test d1
6 1 test d1/d2 (glob)
6 1 test d1/d2/b (glob)
6 6 test .
6 6 test c
revision: 6
author: test
msg: make a file executable
M /c
#if execbit
$ test -x a-hg-wc/c
#endif
#if symlink
Symlinks
$ ln -s a/missing a/link
$ hg --cwd a commit -Am 'add symlink'
adding link
$ hg --cwd a mv link newlink
$ hg --cwd a commit -m 'move symlink'
$ hg convert -d svn a a-svnlink
initializing svn repository 'a-svnlink'
initializing svn working copy 'a-svnlink-wc'
scanning source...
sorting...
converting...
7 add a file
6 modify a file
5 rename a file
4 copy a file
3 remove a file
2 make a file executable
1 add symlink
0 move symlink
$ svnupanddisplay a-svnlink-wc 1
8 1 test d1
8 1 test d1/d2
8 1 test d1/d2/b
8 6 test c
8 8 test .
8 8 test newlink
revision: 8
author: test
msg: move symlink
D /link
A /newlink (from /link@7)
Make sure our changes don't affect the rest of the test cases
$ hg --cwd a up 5
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg --cwd a --config extensions.strip= strip -r 6
saved backup bundle to $TESTTMP/a/.hg/strip-backup/bd4f7b7a7067-ed505e42-backup.hg (glob)
#endif
Convert with --full adds and removes files that didn't change
$ touch a/f
$ hg -R a ci -Aqmf
$ echo "rename c d" > filemap
$ hg convert -d svn a --filemap filemap --full
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 f
$ svnupanddisplay a-hg-wc 1
7 7 test .
7 7 test d
7 7 test f
revision: 7
author: test
msg: f
D /c
A /d
D /d1
A /f
$ rm -rf a a-hg a-hg-wc
Executable in new directory
$ hg init a
$ mkdir a/d1
$ echo a > a/d1/a
#if execbit
$ chmod +x a/d1/a
#else
$ echo fake >> a/d1/a
#endif
$ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory'
adding d1/a
$ hg convert -d svn a
assuming destination a-hg
initializing svn repository 'a-hg'
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 add executable file in new directory
$ svnupanddisplay a-hg-wc 1
1 1 test .
1 1 test d1
1 1 test d1/a (glob)
revision: 1
author: test
msg: add executable file in new directory
A /d1
A /d1/a
#if execbit
$ test -x a-hg-wc/d1/a
#endif
Copy to new directory
$ mkdir a/d2
$ hg --cwd a cp d1/a d2/a
$ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory'
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 copy file to new directory
$ svnupanddisplay a-hg-wc 1
2 1 test d1
2 1 test d1/a (glob)
2 2 test .
2 2 test d2
2 2 test d2/a (glob)
revision: 2
author: test
msg: copy file to new directory
A /d2
A /d2/a (from /d1/a@1)
Branchy history
$ hg init b
$ echo base > b/b
$ hg --cwd b ci -d '0 0' -Ambase
adding b
$ svn-safe-append.py left-1 b/b
$ echo left-1 > b/left-1
$ hg --cwd b ci -d '1 0' -Amleft-1
adding left-1
$ svn-safe-append.py left-2 b/b
$ echo left-2 > b/left-2
$ hg --cwd b ci -d '2 0' -Amleft-2
adding left-2
$ hg --cwd b up 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ svn-safe-append.py right-1 b/b
$ echo right-1 > b/right-1
$ hg --cwd b ci -d '3 0' -Amright-1
adding right-1
created new head
$ svn-safe-append.py right-2 b/b
$ echo right-2 > b/right-2
$ hg --cwd b ci -d '4 0' -Amright-2
adding right-2
$ hg --cwd b up -C 2
3 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg --cwd b merge
merging b
warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
2 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
[1]
$ hg --cwd b revert -r 2 b
$ hg --cwd b resolve -m b
(no more unresolved files)
$ hg --cwd b ci -d '5 0' -m 'merge'
Expect 4 changes
$ hg convert -d svn b
assuming destination b-hg
initializing svn repository 'b-hg'
initializing svn working copy 'b-hg-wc'
scanning source...
sorting...
converting...
5 base
4 left-1
3 left-2
2 right-1
1 right-2
0 merge
$ svnupanddisplay b-hg-wc 0
4 2 test left-1
4 3 test b
4 3 test left-2
4 4 test .
4 4 test right-1
4 4 test right-2
revision: 4
author: test
msg: merge
A /right-1
A /right-2
revision: 3
author: test
msg: left-2
M /b
A /left-2
revision: 2
author: test
msg: left-1
M /b
A /left-1
revision: 1
author: test
msg: base
A /b
Tags are not supported, but must not break conversion
$ rm -rf a a-hg a-hg-wc
$ hg init a
$ echo a > a/a
$ hg --cwd a ci -d '0 0' -A -m 'Add file a'
adding a
$ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0
$ hg convert -d svn a
assuming destination a-hg
initializing svn repository 'a-hg'
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
1 Add file a
0 Tagged as v1.0
writing Subversion tags is not yet implemented
$ svnupanddisplay a-hg-wc 2
2 1 test a
2 2 test .
2 2 test .hgtags
revision: 2
author: test
msg: Tagged as v1.0
A /.hgtags
revision: 1
author: test
msg: Add file a
A /a
$ rm -rf a a-hg a-hg-wc