ui: add special-purpose atexit functionality
In spite of its longstanding use, Python's built-in atexit code is
not suitable for Mercurial's purposes, for several reasons:
* Handlers run after application code has finished.
* Because of this, the code that runs handlers swallows exceptions
(since there's no possible stacktrace to associate errors with).
If we're lucky, we'll get something spat out to stderr (if stderr
still works), which of course isn't any use in a big deployment
where it's important that exceptions get logged and aggregated.
* Mercurial's current atexit handlers make unfortunate assumptions
about process state (specifically stdio) that, coupled with the
above problems, make it impossible to deal with certain categories
of error (try "hg status > /dev/full" on a Linux box).
* In Python 3, the atexit implementation is completely hidden, so
we can't hijack the platform's atexit code to run handlers at a
time of our choosing.
As a result, here's a perfectly cromulent atexit-like implementation
over which we have control. This lets us decide exactly when the
handlers run (after each request has completed), and control what
the process state is when that occurs (and afterwards).
$ hg init
$ cat << EOF > a
> Small Mathematical Series.
> One
> Two
> Three
> Four
> Five
> Hop we are done.
> EOF
$ hg add a
$ hg commit -m ancestor
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 4
> 5
> Hop we are done.
> EOF
$ hg commit -m branch1
$ hg co 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 6
> 8
> Hop we are done.
> EOF
$ hg commit -m branch2
created new head
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
[1]
$ hg id
618808747361+c0c68e4fe667+ tip
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 618808747361 - test: branch2
6
8
=======
4
5
>>>>>>> merge rev: c0c68e4fe667 - test: branch1
Hop we are done.
$ hg status
M a
? a.orig
Verify custom conflict markers
$ hg up -q --clean .
$ printf "\n[ui]\nmergemarkertemplate={author} {rev}\n" >> .hg/hgrc
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line splitting of custom conflict marker which causes multiple lines
$ hg up -q --clean .
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
> EOF
$ hg -q merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line trimming of custom conflict marker using multi-byte characters
$ hg up -q --clean .
$ python <<EOF
> fp = open('logfile', 'w')
> fp.write('12345678901234567890123456789012345678901234567890' +
> '1234567890') # there are 5 more columns for 80 columns
>
> # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
> fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
>
> fp.close()
> EOF
$ hg add logfile
$ hg --encoding utf-8 commit --logfile logfile
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={desc|firstline}
> EOF
$ hg -q --encoding utf-8 merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
6
8
=======
4
5
>>>>>>> merge rev: branch1
Hop we are done.
Verify basic conflict markers
$ hg up -q --clean 2
$ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy
6
8
=======
4
5
>>>>>>> merge rev
Hop we are done.
internal:merge3
$ hg up -q --clean .
$ hg merge 1 --tool internal:merge3
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
[1]
$ cat a
Small Mathematical Series.
<<<<<<< working copy
1
2
3
6
8
||||||| base
One
Two
Three
Four
Five
=======
1
2
3
4
5
>>>>>>> merge rev
Hop we are done.
Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other
$ hg up -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
1 other heads for branch "default"
$ printf "\n\nEnd of file\n" >> a
$ hg ci -m "Add some stuff at the end"
$ hg up -r 1
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "Start of file\n\n\n" > tmp
$ cat a >> tmp
$ mv tmp a
$ hg ci -m "Add some stuff at the beginning"
Now test :merge-other and :merge-local
$ hg merge
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
1 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
[1]
$ hg resolve --tool :merge-other a
merging a
(no more unresolved files)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
6
8
Hop we are done.
End of file
$ hg up -C
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
1 other heads for branch "default"
$ hg merge --tool :merge-local
merging a
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
4
5
Hop we are done.
End of file