view hgext/convert/p4.py @ 30745:c1b7b2285522

revlog: flag processor

Add the ability for revlog objects to process revision flags and apply
registered transforms on read/write operations.

This patch introduces:
- the 'revlog._processflags()' method that looks at revision flags and applies
  flag processors registered on them. Due to the need to handle non-commutative
  operations, flag transforms are applied in stable order but the order in which
  the transforms are applied is reversed between read and write operations.
- the 'addflagprocessor()' method allowing to register processors on flags.
  Flag processors are defined as a 3-tuple of (read, write, raw) functions to be
  applied depending on the operation being performed.
- an update on 'revlog.addrevision()' behavior. The current flagprocessor design
  relies on extensions to wrap around 'addrevision()' to set flags on revision
  data, and on the flagprocessor to perform the actual transformation of its
  contents. In the lfs case, this means we need to process flags before we meet
  the 2GB size check, leading to performing some operations before it happens:
  - if flags are set on the revision data, we assume some extensions might be
    modifying the contents using the flag processor next, and we compute the
    node for the original revision data (still allowing extension to override
    the node by wrapping around 'addrevision()').
  - we then invoke the flag processor to apply registered transforms (in lfs's
    case, drastically reducing the size of large blobs).
  - finally, we proceed with the 2GB size check.

Note: In the case a cachedelta is passed to 'addrevision()' and we detect the
flag processor modified the revision data, we chose to trust the flag processor
and drop the cachedelta.

# Perforce source for convert extension.
#
# Copyright 2009, Frank Kingswood <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import

import marshal
import re

from mercurial.i18n import _
from mercurial import (
    error,
    util,
)

from . import common

def loaditer(f):
    "Yield the dictionary objects generated by p4"
    try:
        while True:
            d = marshal.load(f)
            if not d:
                break
            yield d
    except EOFError:
        pass

def decodefilename(filename):
    """Perforce escapes special characters @, #, *, or %
    with %40, %23, %2A, or %25 respectively

    >>> decodefilename('portable-net45%252Bnetcore45%252Bwp8%252BMonoAndroid')
    'portable-net45%2Bnetcore45%2Bwp8%2BMonoAndroid'
    >>> decodefilename('//Depot/Directory/%2525/%2523/%23%40.%2A')
    '//Depot/Directory/%25/%23/#@.*'
    """
    replacements = [('%2A', '*'), ('%23', '#'), ('%40', '@'), ('%25', '%')]
    for k, v in replacements:
        filename = filename.replace(k, v)
    return filename

class p4_source(common.converter_source):
    def __init__(self, ui, path, revs=None):
        # avoid import cycle
        from . import convcmd

        super(p4_source, self).__init__(ui, path, revs=revs)

        if "/" in path and not path.startswith('//'):
            raise common.NoRepo(_('%s does not look like a P4 repository') %
                                path)

        common.checktool('p4', abort=False)

        self.revmap = {}
        self.encoding = self.ui.config('convert', 'p4.encoding',
                                       default=convcmd.orig_encoding)
        self.re_type = re.compile(
            "([a-z]+)?(text|binary|symlink|apple|resource|unicode|utf\d+)"
            "(\+\w+)?$")
        self.re_keywords = re.compile(
            r"\$(Id|Header|Date|DateTime|Change|File|Revision|Author)"
            r":[^$\n]*\$")
        self.re_keywords_old = re.compile("\$(Id|Header):[^$\n]*\$")

        if revs and len(revs) > 1:
            raise error.Abort(_("p4 source does not support specifying "
                               "multiple revisions"))

    def setrevmap(self, revmap):
        """Sets the parsed revmap dictionary.

        Revmap stores mappings from a source revision to a target revision.
        It is set in convertcmd.convert and provided by the user as a file
        on the commandline.

        Revisions in the map are considered beeing present in the
        repository and ignored during _parse(). This allows for incremental
        imports if a revmap is provided.
        """
        self.revmap = revmap

    def _parse_view(self, path):
        "Read changes affecting the path"
        cmd = 'p4 -G changes -s submitted %s' % util.shellquote(path)
        stdout = util.popen(cmd, mode='rb')
        p4changes = {}
        for d in loaditer(stdout):
            c = d.get("change", None)
            if c:
                p4changes[c] = True
        return p4changes

    def _parse(self, ui, path):
        "Prepare list of P4 filenames and revisions to import"
        p4changes = {}
        changeset = {}
        files_map = {}
        copies_map = {}
        localname = {}
        depotname = {}
        heads = []

        ui.status(_('reading p4 views\n'))

        # read client spec or view
        if "/" in path:
            p4changes.update(self._parse_view(path))
            if path.startswith("//") and path.endswith("/..."):
                views = {path[:-3]:""}
            else:
                views = {"//": ""}
        else:
            cmd = 'p4 -G client -o %s' % util.shellquote(path)
            clientspec = marshal.load(util.popen(cmd, mode='rb'))

            views = {}
            for client in clientspec:
                if client.startswith("View"):
                    sview, cview = clientspec[client].split()
                    p4changes.update(self._parse_view(sview))
                    if sview.endswith("...") and cview.endswith("..."):
                        sview = sview[:-3]
                        cview = cview[:-3]
                    cview = cview[2:]
                    cview = cview[cview.find("/") + 1:]
                    views[sview] = cview

        # list of changes that affect our source files
        p4changes = p4changes.keys()
        p4changes.sort(key=int)

        # list with depot pathnames, longest first
        vieworder = views.keys()
        vieworder.sort(key=len, reverse=True)

        # handle revision limiting
        startrev = self.ui.config('convert', 'p4.startrev', default=0)

        # now read the full changelists to get the list of file revisions
        ui.status(_('collecting p4 changelists\n'))
        lastid = None
        for change in p4changes:
            if startrev and int(change) < int(startrev):
                continue
            if self.revs and int(change) > int(self.revs[0]):
                continue
            if change in self.revmap:
                # Ignore already present revisions, but set the parent pointer.
                lastid = change
                continue

            if lastid:
                parents = [lastid]
            else:
                parents = []

            d = self._fetch_revision(change)
            c = self._construct_commit(d, parents)

            shortdesc = c.desc.splitlines(True)[0].rstrip('\r\n')
            t = '%s %s' % (c.rev, repr(shortdesc)[1:-1])
            ui.status(util.ellipsis(t, 80) + '\n')

            files = []
            copies = {}
            copiedfiles = []
            i = 0
            while ("depotFile%d" % i) in d and ("rev%d" % i) in d:
                oldname = d["depotFile%d" % i]
                filename = None
                for v in vieworder:
                    if oldname.lower().startswith(v.lower()):
                        filename = decodefilename(views[v] + oldname[len(v):])
                        break
                if filename:
                    files.append((filename, d["rev%d" % i]))
                    depotname[filename] = oldname
                    if (d.get("action%d" % i) == "move/add"):
                        copiedfiles.append(filename)
                    localname[oldname] = filename
                i += 1

            # Collect information about copied files
            for filename in copiedfiles:
                oldname = depotname[filename]

                flcmd = 'p4 -G filelog %s' \
                      % util.shellquote(oldname)
                flstdout = util.popen(flcmd, mode='rb')

                copiedfilename = None
                for d in loaditer(flstdout):
                    copiedoldname = None

                    i = 0
                    while ("change%d" % i) in d:
                        if (d["change%d" % i] == change and
                            d["action%d" % i] == "move/add"):
                            j = 0
                            while ("file%d,%d" % (i, j)) in d:
                                if d["how%d,%d" % (i, j)] == "moved from":
                                    copiedoldname = d["file%d,%d" % (i, j)]
                                    break
                                j += 1
                        i += 1

                    if copiedoldname and copiedoldname in localname:
                        copiedfilename = localname[copiedoldname]
                        break

                if copiedfilename:
                    copies[filename] = copiedfilename
                else:
                    ui.warn(_("cannot find source for copied file: %s@%s\n")
                            % (filename, change))

            changeset[change] = c
            files_map[change] = files
            copies_map[change] = copies
            lastid = change

        if lastid and len(changeset) > 0:
            heads = [lastid]

        return {
            'changeset': changeset,
            'files': files_map,
            'copies': copies_map,
            'heads': heads,
            'depotname': depotname,
        }

    @util.propertycache
    def _parse_once(self):
        return self._parse(self.ui, self.path)

    @util.propertycache
    def copies(self):
        return self._parse_once['copies']

    @util.propertycache
    def files(self):
        return self._parse_once['files']

    @util.propertycache
    def changeset(self):
        return self._parse_once['changeset']

    @util.propertycache
    def heads(self):
        return self._parse_once['heads']

    @util.propertycache
    def depotname(self):
        return self._parse_once['depotname']

    def getheads(self):
        return self.heads

    def getfile(self, name, rev):
        cmd = 'p4 -G print %s' \
            % util.shellquote("%s#%s" % (self.depotname[name], rev))

        lasterror = None
        while True:
            stdout = util.popen(cmd, mode='rb')

            mode = None
            contents = []
            keywords = None

            for d in loaditer(stdout):
                code = d["code"]
                data = d.get("data")

                if code == "error":
                    # if this is the first time error happened
                    # re-attempt getting the file
                    if not lasterror:
                        lasterror = IOError(d["generic"], data)
                        # this will exit inner-most for-loop
                        break
                    else:
                        raise lasterror

                elif code == "stat":
                    action = d.get("action")
                    if action in ["purge", "delete", "move/delete"]:
                        return None, None
                    p4type = self.re_type.match(d["type"])
                    if p4type:
                        mode = ""
                        flags = ((p4type.group(1) or "")
                               + (p4type.group(3) or ""))
                        if "x" in flags:
                            mode = "x"
                        if p4type.group(2) == "symlink":
                            mode = "l"
                        if "ko" in flags:
                            keywords = self.re_keywords_old
                        elif "k" in flags:
                            keywords = self.re_keywords

                elif code == "text" or code == "binary":
                    contents.append(data)

                lasterror = None

            if not lasterror:
                break

        if mode is None:
            return None, None

        contents = ''.join(contents)

        if keywords:
            contents = keywords.sub("$\\1$", contents)
        if mode == "l" and contents.endswith("\n"):
            contents = contents[:-1]

        return contents, mode

    def getchanges(self, rev, full):
        if full:
            raise error.Abort(_("convert from p4 does not support --full"))
        return self.files[rev], self.copies[rev], set()

    def _construct_commit(self, obj, parents=None):
        """
        Constructs a common.commit object from an unmarshalled
        `p4 describe` output
        """
        desc = self.recode(obj.get("desc", ""))
        date = (int(obj["time"]), 0)     # timezone not set
        if parents is None:
            parents = []

        return common.commit(author=self.recode(obj["user"]),
            date=util.datestr(date, '%Y-%m-%d %H:%M:%S %1%2'),
            parents=parents, desc=desc, branch=None, rev=obj['change'],
            extra={"p4": obj['change'], "convert_revision": obj['change']})

    def _fetch_revision(self, rev):
        """Return an output of `p4 describe` including author, commit date as
        a dictionary."""
        cmd = "p4 -G describe -s %s" % rev
        stdout = util.popen(cmd, mode='rb')
        return marshal.load(stdout)

    def getcommit(self, rev):
        if rev in self.changeset:
            return self.changeset[rev]
        elif rev in self.revmap:
            d = self._fetch_revision(rev)
            return self._construct_commit(d, parents=None)
        raise error.Abort(
            _("cannot find %s in the revmap or parsed changesets") % rev)

    def gettags(self):
        return {}

    def getchangedfiles(self, rev, i):
        return sorted([x[0] for x in self.files[rev]])