view tests/test-copy.t @ 30745:c1b7b2285522

revlog: flag processor

Add the ability for revlog objects to process revision flags and apply
registered transforms on read/write operations.

This patch introduces:
- the 'revlog._processflags()' method that looks at revision flags and applies
  flag processors registered on them. Due to the need to handle non-commutative
  operations, flag transforms are applied in stable order but the order in which
  the transforms are applied is reversed between read and write operations.
- the 'addflagprocessor()' method allowing to register processors on flags.
  Flag processors are defined as a 3-tuple of (read, write, raw) functions to be
  applied depending on the operation being performed.
- an update on 'revlog.addrevision()' behavior. The current flagprocessor design
  relies on extensions to wrap around 'addrevision()' to set flags on revision
  data, and on the flagprocessor to perform the actual transformation of its
  contents. In the lfs case, this means we need to process flags before we meet
  the 2GB size check, leading to performing some operations before it happens:
  - if flags are set on the revision data, we assume some extensions might be
    modifying the contents using the flag processor next, and we compute the
    node for the original revision data (still allowing extension to override
    the node by wrapping around 'addrevision()').
  - we then invoke the flag processor to apply registered transforms (in lfs's
    case, drastically reducing the size of large blobs).
  - finally, we proceed with the 2GB size check.

Note: In the case a cachedelta is passed to 'addrevision()' and we detect the
flag processor modified the revision data, we chose to trust the flag processor
and drop the cachedelta.

# enable bundle2 in advance

  $ cat << EOF >> $HGRCPATH
  > [format]
  > usegeneraldelta=yes
  > EOF

  $ mkdir part1
  $ cd part1

  $ hg init
  $ echo a > a
  $ hg add a
  $ hg commit -m "1"
  $ hg status
  $ hg copy a b
  $ hg --config ui.portablefilenames=abort copy a con.xml
  abort: filename contains 'con', which is reserved on Windows: 'con.xml'
  [255]
  $ hg status
  A b
  $ hg sum
  parent: 0:c19d34741b0a tip
   1
  branch: default
  commit: 1 copied
  update: (current)
  phases: 1 draft
  $ hg --debug commit -m "2"
  committing files:
  b
   b: copy a:b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3
  committing manifest
  committing changelog
  committed changeset 1:93580a2c28a50a56f63526fb305067e6fbf739c4

we should see two history entries

  $ hg history -v
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       b
  description:
  2
  
  
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       a
  description:
  1
  
  

we should see one log entry for a

  $ hg log a
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1
  

this should show a revision linked to changeset 0

  $ hg debugindex a
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b789fdd96dc2 000000000000 000000000000 (re)

we should see one log entry for b

  $ hg log b
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     2
  

this should show a revision linked to changeset 1

  $ hg debugindex b
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      65  .....       1 37d9b5d994ea 000000000000 000000000000 (re)

this should show the rename information in the metadata

  $ hg debugdata b 0 | head -3 | tail -2
  copy: a
  copyrev: b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3

  $ md5sum.py .hg/store/data/b.i
  44913824c8f5890ae218f9829535922e  .hg/store/data/b.i
  $ hg cat b > bsum
  $ md5sum.py bsum
  60b725f10c9c85c70d97880dfe8191b3  bsum
  $ hg cat a > asum
  $ md5sum.py asum
  60b725f10c9c85c70d97880dfe8191b3  asum
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

  $ cd ..


  $ mkdir part2
  $ cd part2

  $ hg init
  $ echo foo > foo
should fail - foo is not managed
  $ hg mv foo bar
  foo: not copying - file is not managed
  abort: no files to copy
  [255]
  $ hg st -A
  ? foo
  $ hg add foo
dry-run; print a warning that this is not a real copy; foo is added
  $ hg mv --dry-run foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A foo
should print a warning that this is not a real copy; bar is added
  $ hg mv foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A bar
should print a warning that this is not a real copy; foo is added
  $ hg cp bar foo
  bar has not been committed yet, so no copy data will be stored for foo.
  $ hg rm -f bar
  $ rm bar
  $ hg st -A
  A foo
  $ hg commit -m1

moving a missing file
  $ rm foo
  $ hg mv foo foo3
  foo: deleted in working directory
  foo3 does not exist!
  $ hg up -qC .

copy --after to a nonexistent target filename
  $ hg cp -A foo dummy
  foo: not recording copy - dummy does not exist

dry-run; should show that foo is clean
  $ hg copy --dry-run foo bar
  $ hg st -A
  C foo
should show copy
  $ hg copy foo bar
  $ hg st -C
  A bar
    foo

shouldn't show copy
  $ hg commit -m2
  $ hg st -C

should match
  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       5  .....       0 2ed2a3912a0b 000000000000 000000000000 (re)
  $ hg debugrename bar
  bar renamed from foo:2ed2a3912a0b24502043eae84ee4b279c18b90dd

  $ echo bleah > foo
  $ echo quux > bar
  $ hg commit -m3

should not be renamed
  $ hg debugrename bar
  bar not renamed

  $ hg copy -f foo bar
should show copy
  $ hg st -C
  M bar
    foo

XXX: filtering lfilesrepo.status() in 3.3-rc causes the copy source to not be
displayed.
  $ hg st -C --config extensions.largefiles=
  M bar
    foo

  $ hg commit -m3

should show no parents for tip
  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      69  .....       1 7711d36246cc 000000000000 000000000000 (re)
       1        69       6  .....       2 bdf70a2b8d03 7711d36246cc 000000000000 (re)
       2        75      71  .....       3 b2558327ea8d 000000000000 000000000000 (re)
should match
  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       5  .....       0 2ed2a3912a0b 000000000000 000000000000 (re)
       1         5       7  .....       2 dd12c926cf16 2ed2a3912a0b 000000000000 (re)
  $ hg debugrename bar
  bar renamed from foo:dd12c926cf165e3eb4cf87b084955cb617221c17

should show no copies
  $ hg st -C

copy --after on an added file
  $ cp bar baz
  $ hg add baz
  $ hg cp -A bar baz
  $ hg st -C
  A baz
    bar

foo was clean:
  $ hg st -AC foo
  C foo
Trying to copy on top of an existing file fails,
  $ hg copy -A bar foo
  foo: not overwriting - file already committed
  (hg copy --after --force to replace the file by recording a copy)
same error without the --after, so the user doesn't have to go through
two hints:
  $ hg copy bar foo
  foo: not overwriting - file already committed
  (hg copy --force to replace the file by recording a copy)
but it's considered modified after a copy --after --force
  $ hg copy -Af bar foo
  $ hg st -AC foo
  M foo
    bar
The hint for a file that exists but is not in file history doesn't
mention --force:
  $ touch xyzzy
  $ hg cp bar xyzzy
  xyzzy: not overwriting - file exists
  (hg copy --after to record the copy)

  $ cd ..