view tests/test-rename-dir-merge.t @ 30745:c1b7b2285522

revlog: flag processor

Add the ability for revlog objects to process revision flags and apply
registered transforms on read/write operations.

This patch introduces:
- the 'revlog._processflags()' method that looks at revision flags and applies
  flag processors registered on them. Due to the need to handle non-commutative
  operations, flag transforms are applied in stable order but the order in which
  the transforms are applied is reversed between read and write operations.
- the 'addflagprocessor()' method allowing to register processors on flags.
  Flag processors are defined as a 3-tuple of (read, write, raw) functions to be
  applied depending on the operation being performed.
- an update on 'revlog.addrevision()' behavior. The current flagprocessor design
  relies on extensions to wrap around 'addrevision()' to set flags on revision
  data, and on the flagprocessor to perform the actual transformation of its
  contents. In the lfs case, this means we need to process flags before we meet
  the 2GB size check, leading to performing some operations before it happens:
  - if flags are set on the revision data, we assume some extensions might be
    modifying the contents using the flag processor next, and we compute the
    node for the original revision data (still allowing extension to override
    the node by wrapping around 'addrevision()').
  - we then invoke the flag processor to apply registered transforms (in lfs's
    case, drastically reducing the size of large blobs).
  - finally, we proceed with the 2GB size check.

Note: In the case a cachedelta is passed to 'addrevision()' and we detect the
flag processor modified the revision data, we chose to trust the flag processor
and drop the cachedelta.

  $ hg init t
  $ cd t

  $ mkdir a
  $ echo foo > a/a
  $ echo bar > a/b
  $ hg ci -Am "0"
  adding a/a
  adding a/b

  $ hg co -C 0
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg mv a b
  moving a/a to b/a (glob)
  moving a/b to b/b (glob)
  $ hg ci -m "1 mv a/ b/"

  $ hg co -C 0
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo baz > a/c
  $ echo quux > a/d
  $ hg add a/c
  $ hg ci -m "2 add a/c"
  created new head

  $ hg merge --debug 1
    searching for copies back to rev 1
    unmatched files in local:
     a/c
    unmatched files in other:
     b/a
     b/b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: ce36d17b18fb+, remote: 397f8b00a740
   a/a: other deleted -> r
  removing a/a
   a/b: other deleted -> r
  removing a/b
   b/a: remote created -> g
  getting b/a
   b/b: remote created -> g
  getting b/b
   b/c: remote directory rename - move from a/c -> dm
  moving a/c to b/c (glob)
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  M b/a
  M b/b
  A b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  $ hg ci -m "3 merge 2+1"
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88 (glob)

  $ hg co -C 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge --debug 2
    searching for copies back to rev 1
    unmatched files in local:
     b/a
     b/b
    unmatched files in other:
     a/c
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: 397f8b00a740+, remote: ce36d17b18fb
  starting 4 threads for background file closing (?)
   b/c: local directory rename - get from a/c -> dg
  getting a/c to b/c
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  A b/c
    a/c
  ? a/d
  $ hg ci -m "4 merge 1+2"
  created new head
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88 (glob)

Local directory rename with conflicting file added in remote source directory
and untracked in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg merge 2
  b/c: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ cat b/c
  target
but it should succeed if the content matches
  $ hg cat -r 2 a/c > b/c
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st -C
  A b/c
    a/c
  ? a/d

Local directory rename with conflicting file added in remote source directory
and committed in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg add b/c
  $ hg commit -qm 'new file in target directory'
  $ hg merge 2
  merging b/c and a/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg st -A
  M b/c
    a/c
  ? a/d
  ? b/c.orig
  C b/a
  C b/b
  $ cat b/c
  <<<<<<< working copy: f1c50ca4f127 - test: new file in target directory
  target
  =======
  baz
  >>>>>>> merge rev:    ce36d17b18fb - test: 2 add a/c
  $ rm b/c.orig

Remote directory rename with conflicting file added in remote target directory
and committed in local source directory.

  $ hg co -qC 2
  $ hg st -A
  ? a/d
  C a/a
  C a/b
  C a/c
  $ hg merge 5
  merging a/c and b/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 2 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg st -A
  M b/a
  M b/b
  M b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  ? b/c.orig
  $ cat b/c
  <<<<<<< working copy: ce36d17b18fb - test: 2 add a/c
  baz
  =======
  target
  >>>>>>> merge rev:    f1c50ca4f127 - test: new file in target directory

Second scenario with two repos:

  $ cd ..
  $ hg init r1
  $ cd r1
  $ mkdir a
  $ echo foo > a/f
  $ hg add a
  adding a/f (glob)
  $ hg ci -m "a/f == foo"
  $ cd ..

  $ hg clone r1 r2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r2
  $ hg mv a b
  moving a/f to b/f (glob)
  $ echo foo1 > b/f
  $ hg ci -m" a -> b, b/f == foo1"
  $ cd ..

  $ cd r1
  $ mkdir a/aa
  $ echo bar > a/aa/g
  $ hg add a/aa
  adding a/aa/g (glob)
  $ hg ci -m "a/aa/g"
  $ hg pull ../r2
  pulling from ../r2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg merge
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg st -C
  M b/f
  A b/aa/g
    a/aa/g
  R a/aa/g
  R a/f

  $ cd ..

Test renames to separate directories

  $ hg init a
  $ cd a
  $ mkdir a
  $ touch a/s
  $ touch a/t
  $ hg ci -Am0
  adding a/s
  adding a/t

Add more files

  $ touch a/s2
  $ touch a/t2
  $ hg ci -Am1
  adding a/s2
  adding a/t2

Do moves on a branch

  $ hg up 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkdir s
  $ mkdir t
  $ hg mv a/s s
  $ hg mv a/t t
  $ hg ci -Am2
  created new head
  $ hg st --copies --change .
  A s/s
    a/s
  A t/t
    a/t
  R a/s
  R a/t

Merge shouldn't move s2, t2

  $ hg merge
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M a/s2
  M a/t2

Try the merge in the other direction. It may or may not be appropriate for
status to list copies here.

  $ hg up -C 1
  4 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg merge
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M s/s
  M t/t
  R a/s
  R a/t