zstd: vendor python-zstandard 0.7.0
Commit 3054ae3a66112970a091d3939fee32c2d0c1a23e from
https://github.com/indygreg/python-zstandard is imported without
modifications (other than removing unwanted files).
The vendored zstd library within has been upgraded from 1.1.2 to
1.1.3. This version introduced new APIs for threads, thread
pools, multi-threaded compression, and a new dictionary
builder (COVER). These features are not yet used by
python-zstandard (or Mercurial for that matter). However,
that will likely change in the next python-zstandard release
(and I think there are opportunities for Mercurial to take
advantage of the multi-threaded APIs).
Relevant to Mercurial, the CFFI bindings are now fully
implemented. This means zstd should "just work" with PyPy
(although I haven't tried). The python-zstandard test suite also
runs all tests against both the C extension and CFFI bindings to
ensure feature parity.
There is also a "decompress_content_dict_chain()" API. This was
derived from discussions with Yann Collet on list about alternate
ways of encoding delta chains.
The change most relevant to Mercurial is a performance enhancement in
the simple decompression API to reuse a data structure across
operations. This makes decompression of multiple inputs significantly
faster. (This scenario occurs when reading revlog delta chains, for
example.)
Using python-zstandard's bench.py to measure the performance
difference...
On changelog chunks in the mozilla-unified repo:
decompress discrete decompress() reuse zctx
1.262243 wall; 1.260000 CPU; 1.260000 user; 0.000000 sys 170.43 MB/s (best of 3)
0.949106 wall; 0.950000 CPU; 0.950000 user; 0.000000 sys 226.66 MB/s (best of 4)
decompress discrete dict decompress() reuse zctx
0.692170 wall; 0.690000 CPU; 0.690000 user; 0.000000 sys 310.80 MB/s (best of 5)
0.437088 wall; 0.440000 CPU; 0.440000 user; 0.000000 sys 492.17 MB/s (best of 7)
On manifest chunks in the mozilla-unified repo:
decompress discrete decompress() reuse zctx
1.367284 wall; 1.370000 CPU; 1.370000 user; 0.000000 sys 274.01 MB/s (best of 3)
1.086831 wall; 1.080000 CPU; 1.080000 user; 0.000000 sys 344.72 MB/s (best of 3)
decompress discrete dict decompress() reuse zctx
0.993272 wall; 0.990000 CPU; 0.990000 user; 0.000000 sys 377.19 MB/s (best of 3)
0.678651 wall; 0.680000 CPU; 0.680000 user; 0.000000 sys 552.06 MB/s (best of 5)
That should make reads on zstd revlogs a bit faster ;)
# no-check-commit
# record.py
#
# Copyright 2007 Bryan O'Sullivan <bos@serpentine.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''commands to interactively select changes for commit/qrefresh (DEPRECATED)
The feature provided by this extension has been moved into core Mercurial as
:hg:`commit --interactive`.'''
from __future__ import absolute_import
from mercurial.i18n import _
from mercurial import (
cmdutil,
commands,
error,
extensions,
)
cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
@command("record",
# same options as commit + white space diff options
[c for c in commands.table['^commit|ci'][1][:]
if c[1] != "interactive"] + commands.diffwsopts,
_('hg record [OPTION]... [FILE]...'))
def record(ui, repo, *pats, **opts):
'''interactively select changes to commit
If a list of files is omitted, all changes reported by :hg:`status`
will be candidates for recording.
See :hg:`help dates` for a list of formats valid for -d/--date.
You will be prompted for whether to record changes to each
modified file, and for files with multiple changes, for each
change to use. For each query, the following responses are
possible::
y - record this change
n - skip this change
e - edit this change manually
s - skip remaining changes to this file
f - record remaining changes to this file
d - done, skip remaining changes and files
a - record all changes to all remaining files
q - quit, recording no changes
? - display help
This command is not available when committing a merge.'''
if not ui.interactive():
raise error.Abort(_('running non-interactively, use %s instead') %
'commit')
opts["interactive"] = True
backup = ui.backupconfig('experimental', 'crecord')
try:
ui.setconfig('experimental', 'crecord', False, 'record')
return commands.commit(ui, repo, *pats, **opts)
finally:
ui.restoreconfig(backup)
def qrefresh(origfn, ui, repo, *pats, **opts):
if not opts['interactive']:
return origfn(ui, repo, *pats, **opts)
mq = extensions.find('mq')
def committomq(ui, repo, *pats, **opts):
# At this point the working copy contains only changes that
# were accepted. All other changes were reverted.
# We can't pass *pats here since qrefresh will undo all other
# changed files in the patch that aren't in pats.
mq.refresh(ui, repo, **opts)
# backup all changed files
cmdutil.dorecord(ui, repo, committomq, None, True,
cmdutil.recordfilter, *pats, **opts)
# This command registration is replaced during uisetup().
@command('qrecord',
[],
_('hg qrecord [OPTION]... PATCH [FILE]...'),
inferrepo=True)
def qrecord(ui, repo, patch, *pats, **opts):
'''interactively record a new patch
See :hg:`help qnew` & :hg:`help record` for more information and
usage.
'''
return _qrecord('qnew', ui, repo, patch, *pats, **opts)
def _qrecord(cmdsuggest, ui, repo, patch, *pats, **opts):
try:
mq = extensions.find('mq')
except KeyError:
raise error.Abort(_("'mq' extension not loaded"))
repo.mq.checkpatchname(patch)
def committomq(ui, repo, *pats, **opts):
opts['checkname'] = False
mq.new(ui, repo, patch, *pats, **opts)
backup = ui.backupconfig('experimental', 'crecord')
try:
ui.setconfig('experimental', 'crecord', False, 'record')
cmdutil.dorecord(ui, repo, committomq, cmdsuggest, False,
cmdutil.recordfilter, *pats, **opts)
finally:
ui.restoreconfig(backup)
def qnew(origfn, ui, repo, patch, *args, **opts):
if opts['interactive']:
return _qrecord(None, ui, repo, patch, *args, **opts)
return origfn(ui, repo, patch, *args, **opts)
def uisetup(ui):
try:
mq = extensions.find('mq')
except KeyError:
return
cmdtable["qrecord"] = \
(qrecord,
# same options as qnew, but copy them so we don't get
# -i/--interactive for qrecord and add white space diff options
mq.cmdtable['^qnew'][1][:] + commands.diffwsopts,
_('hg qrecord [OPTION]... PATCH [FILE]...'))
_wrapcmd('qnew', mq.cmdtable, qnew, _("interactively record a new patch"))
_wrapcmd('qrefresh', mq.cmdtable, qrefresh,
_("interactively select changes to refresh"))
def _wrapcmd(cmd, table, wrapfn, msg):
entry = extensions.wrapcommand(table, cmd, wrapfn)
entry[1].append(('i', 'interactive', None, msg))