view mercurial/pvec.py @ 23848:c5456b64eb07

discovery: run discovery on filtered repository

We have been running discovery on unfiltered repository for quite some time.
This was aimed at two things:

- save some bandwith by prevent the repushing of common but hidden changesets
- allow phases changes on secret/hidden changeset on bare push.

The cost of this unfiltered discovery combined with evolution is actually really
high. Evolution likely create thousand of hidden heads, and the discovery is
going to try to discovery if each of them are common or not. For example,
pushing from my development mercurial repository implies 17 discovery
round-trip.

The benefit are rare corner cases while the drawback are massive. So we run the
discovery on a filtered repository again.

We add some hack to detect remote heads that are known locally and adds them to
the common set anyway, so the good behavior of most of the corner case should
remains. But this will not work in all cases.

This bring my discovery phase back from 17 round-trips to 1 or 2.

# pvec.py - probabilistic vector clocks for Mercurial
#
# Copyright 2012 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''
A "pvec" is a changeset property based on the theory of vector clocks
that can be compared to discover relatedness without consulting a
graph. This can be useful for tasks like determining how a
disconnected patch relates to a repository.

Currently a pvec consist of 448 bits, of which 24 are 'depth' and the
remainder are a bit vector. It is represented as a 70-character base85
string.

Construction:

- a root changeset has a depth of 0 and a bit vector based on its hash
- a normal commit has a changeset where depth is increased by one and
  one bit vector bit is flipped based on its hash
- a merge changeset pvec is constructed by copying changes from one pvec into
  the other to balance its depth

Properties:

- for linear changes, difference in depth is always <= hamming distance
- otherwise, changes are probably divergent
- when hamming distance is < 200, we can reliably detect when pvecs are near

Issues:

- hamming distance ceases to work over distances of ~ 200
- detecting divergence is less accurate when the common ancestor is very close
  to either revision or total distance is high
- this could probably be improved by modeling the relation between
  delta and hdist

Uses:

- a patch pvec can be used to locate the nearest available common ancestor for
  resolving conflicts
- ordering of patches can be established without a DAG
- two head pvecs can be compared to determine whether push/pull/merge is needed
  and approximately how many changesets are involved
- can be used to find a heuristic divergence measure between changesets on
  different branches
'''

import base85, util
from node import nullrev

_size = 448 # 70 chars b85-encoded
_bytes = _size / 8
_depthbits = 24
_depthbytes = _depthbits / 8
_vecbytes = _bytes - _depthbytes
_vecbits = _vecbytes * 8
_radius = (_vecbits - 30) / 2 # high probability vectors are related

def _bin(bs):
    '''convert a bytestring to a long'''
    v = 0
    for b in bs:
        v = v * 256 + ord(b)
    return v

def _str(v, l):
    bs = ""
    for p in xrange(l):
        bs = chr(v & 255) + bs
        v >>= 8
    return bs

def _split(b):
    '''depth and bitvec'''
    return _bin(b[:_depthbytes]), _bin(b[_depthbytes:])

def _join(depth, bitvec):
    return _str(depth, _depthbytes) + _str(bitvec, _vecbytes)

def _hweight(x):
    c = 0
    while x:
        if x & 1:
            c += 1
        x >>= 1
    return c
_htab = [_hweight(x) for x in xrange(256)]

def _hamming(a, b):
    '''find the hamming distance between two longs'''
    d = a ^ b
    c = 0
    while d:
        c += _htab[d & 0xff]
        d >>= 8
    return c

def _mergevec(x, y, c):
    # Ideally, this function would be x ^ y ^ ancestor, but finding
    # ancestors is a nuisance. So instead we find the minimal number
    # of changes to balance the depth and hamming distance

    d1, v1 = x
    d2, v2 = y
    if d1 < d2:
        d1, d2, v1, v2 = d2, d1, v2, v1

    hdist = _hamming(v1, v2)
    ddist = d1 - d2
    v = v1
    m = v1 ^ v2 # mask of different bits
    i = 1

    if hdist > ddist:
        # if delta = 10 and hdist = 100, then we need to go up 55 steps
        # to the ancestor and down 45
        changes = (hdist - ddist + 1) / 2
    else:
        # must make at least one change
        changes = 1
    depth = d1 + changes

    # copy changes from v2
    if m:
        while changes:
            if m & i:
                v ^= i
                changes -= 1
            i <<= 1
    else:
        v = _flipbit(v, c)

    return depth, v

def _flipbit(v, node):
    # converting bit strings to longs is slow
    bit = (hash(node) & 0xffffffff) % _vecbits
    return v ^ (1<<bit)

def ctxpvec(ctx):
    '''construct a pvec for ctx while filling in the cache'''
    r = ctx._repo
    if not util.safehasattr(r, "_pveccache"):
        r._pveccache = {}
    pvc = r._pveccache
    if ctx.rev() not in pvc:
        cl = r.changelog
        for n in xrange(ctx.rev() + 1):
            if n not in pvc:
                node = cl.node(n)
                p1, p2 = cl.parentrevs(n)
                if p1 == nullrev:
                    # start with a 'random' vector at root
                    pvc[n] = (0, _bin((node * 3)[:_vecbytes]))
                elif p2 == nullrev:
                    d, v = pvc[p1]
                    pvc[n] = (d + 1, _flipbit(v, node))
                else:
                    pvc[n] = _mergevec(pvc[p1], pvc[p2], node)
    bs = _join(*pvc[ctx.rev()])
    return pvec(base85.b85encode(bs))

class pvec(object):
    def __init__(self, hashorctx):
        if isinstance(hashorctx, str):
            self._bs = hashorctx
            self._depth, self._vec = _split(base85.b85decode(hashorctx))
        else:
            self._vec = ctxpvec(hashorctx)

    def __str__(self):
        return self._bs

    def __eq__(self, b):
        return self._vec == b._vec and self._depth == b._depth

    def __lt__(self, b):
        delta = b._depth - self._depth
        if delta < 0:
            return False # always correct
        if _hamming(self._vec, b._vec) > delta:
            return False
        return True

    def __gt__(self, b):
        return b < self

    def __or__(self, b):
        delta = abs(b._depth - self._depth)
        if _hamming(self._vec, b._vec) <= delta:
            return False
        return True

    def __sub__(self, b):
        if self | b:
            raise ValueError("concurrent pvecs")
        return self._depth - b._depth

    def distance(self, b):
        d = abs(b._depth - self._depth)
        h = _hamming(self._vec, b._vec)
        return max(d, h)

    def near(self, b):
        dist = abs(b.depth - self._depth)
        if dist > _radius or _hamming(self._vec, b._vec) > _radius:
            return False