discovery-helper: use reflink copy if available
A reflink copy will copy the files "as usual" but keep using the same data block
underneath. This is only supported by "copy on write" file system like btrfs or
zfs.
This will achieve similar performance that the existing hardlink clone that
Mercurial performs with the same initial space saving. However, it will behave
better on revlogs start being touch by strip. Instead of duplicating all data in
the touched revlogs, only the block actually affected by the strip will be
duplicated. This save a lot of space when building many variants of large
repositories.
The --reflink=always flag make sure the `cp` call fails if reflink copies are
not supported. Falling back to local clone.
$ hg init repo
$ cd repo
$ i=0; while [ "$i" -lt 213 ]; do echo a >> a; i=`expr $i + 1`; done
$ hg add a
$ cp a b
$ hg add b
Wide diffstat:
$ hg diff --stat
a | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
b | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 426 insertions(+), 0 deletions(-)
diffstat width:
$ COLUMNS=24 hg diff --config ui.interactive=true --stat
a | 213 ++++++++++++++
b | 213 ++++++++++++++
2 files changed, 426 insertions(+), 0 deletions(-)
$ hg ci -m adda
$ cat >> a <<EOF
> a
> a
> a
> EOF
Narrow diffstat:
$ hg diff --stat
a | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
$ hg ci -m appenda
>>> open("c", "wb").write(b"\0") and None
$ touch d
$ hg add c d
Binary diffstat:
$ hg diff --stat
c | Bin
1 files changed, 0 insertions(+), 0 deletions(-)
Binary git diffstat:
$ hg diff --stat --git
c | Bin
d | 0
2 files changed, 0 insertions(+), 0 deletions(-)
$ hg ci -m createb
>>> open("file with spaces", "wb").write(b"\0") and None
$ hg add "file with spaces"
Filename with spaces diffstat:
$ hg diff --stat
file with spaces | Bin
1 files changed, 0 insertions(+), 0 deletions(-)
Filename with spaces git diffstat:
$ hg diff --stat --git
file with spaces | Bin
1 files changed, 0 insertions(+), 0 deletions(-)
Filename without "a/" or "b/" (issue5759):
$ hg diff --config 'diff.noprefix=1' -c1 --stat --git
a | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
$ hg diff --config 'diff.noprefix=1' -c2 --stat --git
c | Bin
d | 0
2 files changed, 0 insertions(+), 0 deletions(-)
$ hg log --config 'diff.noprefix=1' -r '1:' -p --stat --git
changeset: 1:3a95b07bb77f
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: appenda
a | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a a
--- a
+++ a
@@ -211,3 +211,6 @@
a
a
a
+a
+a
+a
changeset: 2:c60a6c753773
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: createb
c | Bin
d | 0
2 files changed, 0 insertions(+), 0 deletions(-)
diff --git c c
new file mode 100644
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..f76dd238ade08917e6712764a16a22005a50573d
GIT binary patch
literal 1
Ic${MZ000310RR91
diff --git d d
new file mode 100644
diffstat within directories:
$ hg rm -f 'file with spaces'
$ mkdir dir1 dir2
$ echo new1 > dir1/new
$ echo new2 > dir2/new
$ hg add dir1/new dir2/new
$ hg diff --stat
dir1/new | 1 +
dir2/new | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
$ hg diff --stat --root dir1
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat --root dir1 dir2
warning: dir2 not inside relative root dir1
$ hg diff --stat --root dir1 -I dir1/old
$ cd dir1
$ hg diff --stat .
dir1/new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat . --config ui.relative-paths=yes
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat --root .
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat --root . --config ui.relative-paths=yes
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
--root trumps ui.relative-paths
$ hg diff --stat --root .. --config ui.relative-paths=yes
new | 1 +
../dir2/new | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
$ hg diff --stat --root ../dir1 ../dir2
warning: ../dir2 not inside relative root .
$ hg diff --stat --root . -I old
$ cd ..
Files with lines beginning with '--' or '++' should be properly counted in diffstat
$ hg up -Cr tip
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm dir1/new
$ rm dir2/new
$ rm "file with spaces"
$ cat > file << EOF
> line 1
> line 2
> line 3
> EOF
$ hg commit -Am file
adding file
Lines added starting with '--' should count as additions
$ cat > file << EOF
> line 1
> -- line 2, with dashes
> line 3
> EOF
$ hg diff --root .
diff -r be1569354b24 file
--- a/file Thu Jan 01 00:00:00 1970 +0000
+++ b/file * (glob)
@@ -1,3 +1,3 @@
line 1
-line 2
+-- line 2, with dashes
line 3
$ hg diff --root . --stat
file | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Lines changed starting with '--' should count as deletions
$ hg commit -m filev2
$ cat > file << EOF
> line 1
> -- line 2, with dashes, changed again
> line 3
> EOF
$ hg diff --root .
diff -r 160f7c034df6 file
--- a/file Thu Jan 01 00:00:00 1970 +0000
+++ b/file * (glob)
@@ -1,3 +1,3 @@
line 1
--- line 2, with dashes
+-- line 2, with dashes, changed again
line 3
$ hg diff --root . --stat
file | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Lines changed starting with '--' should count as deletions
and starting with '++' should count as additions
$ cat > file << EOF
> line 1
> ++ line 2, switched dashes to plusses
> line 3
> EOF
$ hg diff --root .
diff -r 160f7c034df6 file
--- a/file Thu Jan 01 00:00:00 1970 +0000
+++ b/file * (glob)
@@ -1,3 +1,3 @@
line 1
--- line 2, with dashes
+++ line 2, switched dashes to plusses
line 3
$ hg diff --root . --stat
file | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
When a file is renamed, --git shouldn't loss the info about old file
$ hg init issue6025
$ cd issue6025
$ echo > a
$ hg ci -Am 'add a'
adding a
$ hg mv a b
$ hg diff --git
diff --git a/a b/b
rename from a
rename to b
$ hg diff --stat
a | 1 -
b | 1 +
2 files changed, 1 insertions(+), 1 deletions(-)
$ hg diff --stat --git
a => b | 0
1 files changed, 0 insertions(+), 0 deletions(-)
-- filename may contain whitespaces
$ echo > c
$ hg ci -Am 'add c'
adding c
$ hg mv c 'new c'
$ hg diff --git
diff --git a/c b/new c
rename from c
rename to new c
$ hg diff --stat
c | 1 -
new c | 1 +
2 files changed, 1 insertions(+), 1 deletions(-)
$ hg diff --stat --git
c => new c | 0
1 files changed, 0 insertions(+), 0 deletions(-)
Make sure `diff --stat -q --config diff.git-0` shows stat (issue4037)
$ hg status
A new c
R c
$ hg diff --stat -q
c | 1 -
new c | 1 +
2 files changed, 1 insertions(+), 1 deletions(-)