discovery-helper: use reflink copy if available
A reflink copy will copy the files "as usual" but keep using the same data block
underneath. This is only supported by "copy on write" file system like btrfs or
zfs.
This will achieve similar performance that the existing hardlink clone that
Mercurial performs with the same initial space saving. However, it will behave
better on revlogs start being touch by strip. Instead of duplicating all data in
the touched revlogs, only the block actually affected by the strip will be
duplicated. This save a lot of space when building many variants of large
repositories.
The --reflink=always flag make sure the `cp` call fails if reflink copies are
not supported. Falling back to local clone.
from __future__ import absolute_import, print_function
import difflib
import random
import unittest
from mercurial import linelog
vecratio = 3 # number of replacelines / number of replacelines_vec
maxlinenum = 0xffffff
maxb1 = 0xffffff
maxdeltaa = 10
maxdeltab = 10
def _genedits(seed, endrev):
lines = []
random.seed(seed)
for rev in range(0, endrev):
n = len(lines)
a1 = random.randint(0, n)
a2 = random.randint(a1, min(n, a1 + maxdeltaa))
b1 = random.randint(0, maxb1)
b2 = random.randint(b1, b1 + maxdeltab)
usevec = not bool(random.randint(0, vecratio))
if usevec:
blines = [(random.randint(0, rev), random.randint(0, maxlinenum))
for _ in range(b1, b2)]
else:
blines = [(rev, bidx) for bidx in range(b1, b2)]
lines[a1:a2] = blines
yield lines, rev, a1, a2, b1, b2, blines, usevec
class linelogtests(unittest.TestCase):
def testlinelogencodedecode(self):
program = [linelog._eof(0, 0),
linelog._jge(41, 42),
linelog._jump(0, 43),
linelog._eof(0, 0),
linelog._jl(44, 45),
linelog._line(46, 47),
]
ll = linelog.linelog(program, maxrev=100)
enc = ll.encode()
# round-trips okay
self.assertEqual(linelog.linelog.fromdata(enc)._program, ll._program)
self.assertEqual(linelog.linelog.fromdata(enc), ll)
# This encoding matches the encoding used by hg-experimental's
# linelog file, or is supposed to if it doesn't.
self.assertEqual(enc, (b'\x00\x00\x01\x90\x00\x00\x00\x06'
b'\x00\x00\x00\xa4\x00\x00\x00*'
b'\x00\x00\x00\x00\x00\x00\x00+'
b'\x00\x00\x00\x00\x00\x00\x00\x00'
b'\x00\x00\x00\xb1\x00\x00\x00-'
b'\x00\x00\x00\xba\x00\x00\x00/'))
def testsimpleedits(self):
ll = linelog.linelog()
# Initial revision: add lines 0, 1, and 2
ll.replacelines(1, 0, 0, 0, 3)
self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(1)],
[(1, 0),
(1, 1),
(1, 2),
])
# Replace line 1 with a new line
ll.replacelines(2, 1, 2, 1, 2)
self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(2)],
[(1, 0),
(2, 1),
(1, 2),
])
# delete a line out of 2
ll.replacelines(3, 1, 2, 0, 0)
self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(3)],
[(1, 0),
(1, 2),
])
# annotation of 1 is unchanged
self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(1)],
[(1, 0),
(1, 1),
(1, 2),
])
ll.annotate(3) # set internal state to revision 3
start = ll.getoffset(0)
end = ll.getoffset(1)
self.assertEqual(ll.getalllines(start, end), [
(1, 0),
(2, 1),
(1, 1),
])
self.assertEqual(ll.getalllines(), [
(1, 0),
(2, 1),
(1, 1),
(1, 2),
])
def testparseclinelogfile(self):
# This data is what the replacements in testsimpleedits
# produce when fed to the original linelog.c implementation.
data = (b'\x00\x00\x00\x0c\x00\x00\x00\x0f'
b'\x00\x00\x00\x00\x00\x00\x00\x02'
b'\x00\x00\x00\x05\x00\x00\x00\x06'
b'\x00\x00\x00\x06\x00\x00\x00\x00'
b'\x00\x00\x00\x00\x00\x00\x00\x07'
b'\x00\x00\x00\x06\x00\x00\x00\x02'
b'\x00\x00\x00\x00\x00\x00\x00\x00'
b'\x00\x00\x00\t\x00\x00\x00\t'
b'\x00\x00\x00\x00\x00\x00\x00\x0c'
b'\x00\x00\x00\x08\x00\x00\x00\x05'
b'\x00\x00\x00\x06\x00\x00\x00\x01'
b'\x00\x00\x00\x00\x00\x00\x00\x05'
b'\x00\x00\x00\x0c\x00\x00\x00\x05'
b'\x00\x00\x00\n\x00\x00\x00\x01'
b'\x00\x00\x00\x00\x00\x00\x00\t')
llc = linelog.linelog.fromdata(data)
self.assertEqual([(l.rev, l.linenum) for l in llc.annotate(1)],
[(1, 0),
(1, 1),
(1, 2),
])
self.assertEqual([(l.rev, l.linenum) for l in llc.annotate(2)],
[(1, 0),
(2, 1),
(1, 2),
])
self.assertEqual([(l.rev, l.linenum) for l in llc.annotate(3)],
[(1, 0),
(1, 2),
])
# Check we emit the same bytecode.
ll = linelog.linelog()
# Initial revision: add lines 0, 1, and 2
ll.replacelines(1, 0, 0, 0, 3)
# Replace line 1 with a new line
ll.replacelines(2, 1, 2, 1, 2)
# delete a line out of 2
ll.replacelines(3, 1, 2, 0, 0)
diff = '\n ' + '\n '.join(difflib.unified_diff(
ll.debugstr().splitlines(), llc.debugstr().splitlines(),
'python', 'c', lineterm=''))
self.assertEqual(ll._program, llc._program, 'Program mismatch: ' + diff)
# Done as a secondary step so we get a better result if the
# program is where the mismatch is.
self.assertEqual(ll, llc)
self.assertEqual(ll.encode(), data)
def testanothersimplecase(self):
ll = linelog.linelog()
ll.replacelines(3, 0, 0, 0, 2)
ll.replacelines(4, 0, 2, 0, 0)
self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(4)],
[])
self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(3)],
[(3, 0), (3, 1)])
# rev 2 is empty because contents were only ever introduced in rev 3
self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(2)],
[])
def testrandomedits(self):
# Inspired by original linelog tests.
seed = random.random()
numrevs = 2000
ll = linelog.linelog()
# Populate linelog
for lines, rev, a1, a2, b1, b2, blines, usevec in _genedits(
seed, numrevs):
if usevec:
ll.replacelines_vec(rev, a1, a2, blines)
else:
ll.replacelines(rev, a1, a2, b1, b2)
ar = ll.annotate(rev)
self.assertEqual(ll.annotateresult, lines)
# Verify we can get back these states by annotating each rev
for lines, rev, a1, a2, b1, b2, blines, usevec in _genedits(
seed, numrevs):
ar = ll.annotate(rev)
self.assertEqual([(l.rev, l.linenum) for l in ar], lines)
def testinfinitebadprogram(self):
ll = linelog.linelog.fromdata(
b'\x00\x00\x00\x00\x00\x00\x00\x02' # header
b'\x00\x00\x00\x00\x00\x00\x00\x01' # JUMP to self
)
with self.assertRaises(linelog.LineLogError):
# should not be an infinite loop and raise
ll.annotate(1)
if __name__ == '__main__':
import silenttestrunner
silenttestrunner.main(__name__)