wireproto: convert legacy commands to command executor
Calls to the legacy commands "changegroup" and "changegroupsubset" have
been ported to the new command executor interface.
Because we always pass arguments by name and not position, some
inconsistent names throughout the code base have been unified.
As part of this change, we no longer had any remaining callers
of the legacy command methods {between, branches, changegroup,
changegroupsubset}. So, these interfaces/methods have been dropped
from peer interfaces. We still have an interface declaring these
methods. But that interface is implemented on the concrete peer
types and isn't part of the generic peer interface. (The
implementations of the command executor continue to call these
methods.)
The ultimate goal is to remove the per-command methods from the
generic peer interface: the only interface-conforming way to
call a command will be with the new executor API. At some point,
we may want to move the methods outside of the peer classes and
change the executor implementations to not call methods directly
on a peer instance.
Differential Revision: https://phab.mercurial-scm.org/D3273
#require killdaemons
Test wire protocol argument passing
Setup repo:
$ hg init repo
Local:
$ hg debugwireargs repo eins zwei --three drei --four vier
eins zwei drei vier None
$ hg debugwireargs repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs repo eins zwei
eins zwei None None None
$ hg debugwireargs repo eins zwei --five fuenf
eins zwei None None fuenf
HTTP:
$ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid \
> -E error.log -A access.log \
> --config experimental.httppostargs=yes
$ cat hg1.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\ qu\ \ atre
un deux trois qu atre None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
$ cat error.log
$ cat access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
HTTP without args-in-POST:
$ hg serve -R repo -p $HGPORT1 -d --pid-file=hg1.pid -E error.log -A access.log
$ cat hg1.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT1/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT1/ \ un deux trois\ qu\ \ atre
un deux trois qu atre None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --five fuenf
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT1/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
$ cat error.log
$ cat access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
HTTP without the httpheader capability:
$ CAP=httpheader . "$TESTDIR/notcapable"
$ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
$ cat hg2.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
eins zwei None None None
$ cat error2.log
$ cat access2.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
SSH (try to exercise the ssh functionality with a dummy script):
$ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo uno due tre quattro
uno due tre quattro None
$ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei
eins zwei None None None
$ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
eins zwei None None None
Explicitly kill daemons to let the test exit on Windows
$ killdaemons.py