rebase: add boolean config item rebase.store-source
This allows to use rebase without recording a rebase_source extra
field. This is useful for example to build a mirror converted from
another SCM (such as svn) by converting only new revisions, and
then incrementally add them to the destination by pulling from the
newly converted (unrelated) repo and rebasing the new revisions
onto the last old already stored changeset. Without this patch the
rebased changesets would always receive some rebase_source that
would depend on the particular history of the conversion process,
instead of only depending on the original source revisions.
This is used to implement a hg mirror repo of SvarDOS (a partially
nonfree but completely redistributable DOS distribution) in the
scripts at https://hg.pushbx.org/ecm/svardos.scr/
In particular, cre.sh creates an svn mirror, upd.sh recreates an
entire hg repo from the svn mirror (which takes too long to do in a
regular job), and akt.sh uses hg convert with the config item
convert.svn.startrev to incrementally convert only the two most
recent revisions already found in the mirror destination plus any
possible new revisions. If any are found, the temporary repo's
changesets are pulled into the destination (as changesets from an
unrelated repository). Then the changesets corresponding to the new
revisions are rebased onto the prior final changeset. (Finally, the
two remaining duplicates of the prior head and its parent are
stripped from the destination repository.)
Without this patch, the particular rebase_source extra field would
depend on the order and times at which akt.sh was used, instead of
only depending on the source repository. In other words, whatever
sequence of upd.sh and akt.sh is used at whatever times, it is
desired that the final output repositories always match each other
exactly.
#!/usr/bin/env python3
"""
Utility for inspecting files in various ways.
This tool is like the collection of tools found in a unix environment but are
cross platform and stable and suitable for our needs in the test suite.
This can be used instead of tools like:
[
dd
find
head
hexdump
ls
md5sum
readlink
sha1sum
stat
tail
test
readlink.py
md5sum.py
"""
import binascii
import glob
import hashlib
import optparse
import os
import re
import sys
# Python 3 adapters
ispy3 = sys.version_info[0] >= 3
if ispy3:
def iterbytes(s):
for i in range(len(s)):
yield s[i : i + 1]
else:
iterbytes = iter
def visit(opts, filenames, outfile):
"""Process filenames in the way specified in opts, writing output to
outfile."""
for f in sorted(filenames):
isstdin = f == '-'
if not isstdin and not os.path.lexists(f):
outfile.write(b'%s: file not found\n' % f.encode('utf-8'))
continue
quiet = opts.quiet and not opts.recurse or isstdin
isdir = os.path.isdir(f)
islink = os.path.islink(f)
isfile = os.path.isfile(f) and not islink
dirfiles = None
content = None
facts = []
if isfile:
if opts.type:
facts.append(b'file')
if any((opts.hexdump, opts.dump, opts.md5, opts.sha1, opts.sha256)):
with open(f, 'rb') as fobj:
content = fobj.read()
elif islink:
if opts.type:
facts.append(b'link')
content = os.readlink(f).encode('utf8')
elif isstdin:
content = getattr(sys.stdin, 'buffer', sys.stdin).read()
if opts.size:
facts.append(b'size=%d' % len(content))
elif isdir:
if opts.recurse or opts.type:
dirfiles = glob.glob(f + '/*')
facts.append(b'directory with %d files' % len(dirfiles))
elif opts.type:
facts.append(b'type unknown')
if not isstdin:
stat = os.lstat(f)
if opts.size and not isdir:
facts.append(b'size=%d' % stat.st_size)
if opts.mode and not islink:
facts.append(b'mode=%o' % (stat.st_mode & 0o777))
if opts.links:
facts.append(b'links=%d' % stat.st_nlink)
if opts.newer:
# mtime might be in whole seconds so newer file might be same
if stat.st_mtime >= os.stat(opts.newer).st_mtime:
facts.append(
b'newer than %s' % opts.newer.encode('utf8', 'replace')
)
else:
facts.append(
b'older than %s' % opts.newer.encode('utf8', 'replace')
)
if opts.md5 and content is not None:
h = hashlib.md5(content)
facts.append(b'md5=%s' % binascii.hexlify(h.digest())[: opts.bytes])
if opts.sha1 and content is not None:
h = hashlib.sha1(content)
facts.append(
b'sha1=%s' % binascii.hexlify(h.digest())[: opts.bytes]
)
if opts.sha256 and content is not None:
h = hashlib.sha256(content)
facts.append(
b'sha256=%s' % binascii.hexlify(h.digest())[: opts.bytes]
)
if isstdin:
outfile.write(b', '.join(facts) + b'\n')
elif facts:
outfile.write(b'%s: %s\n' % (f.encode('utf-8'), b', '.join(facts)))
elif not quiet:
outfile.write(b'%s:\n' % f.encode('utf-8'))
if content is not None:
chunk = content
if not islink:
if opts.lines:
if opts.lines >= 0:
chunk = b''.join(chunk.splitlines(True)[: opts.lines])
else:
chunk = b''.join(chunk.splitlines(True)[opts.lines :])
if opts.bytes:
if opts.bytes >= 0:
chunk = chunk[: opts.bytes]
else:
chunk = chunk[opts.bytes :]
if opts.hexdump:
for i in range(0, len(chunk), 16):
s = chunk[i : i + 16]
outfile.write(
b'%04x: %-47s |%s|\n'
% (
i,
b' '.join(b'%02x' % ord(c) for c in iterbytes(s)),
re.sub(b'[^ -~]', b'.', s),
)
)
if opts.dump:
if not quiet:
outfile.write(b'>>>\n')
outfile.write(chunk)
if not quiet:
if chunk.endswith(b'\n'):
outfile.write(b'<<<\n')
else:
outfile.write(b'\n<<< no trailing newline\n')
if opts.recurse and dirfiles:
assert not isstdin
visit(opts, dirfiles, outfile)
if __name__ == "__main__":
parser = optparse.OptionParser("%prog [options] [filenames]")
parser.add_option(
"-t",
"--type",
action="store_true",
help="show file type (file or directory)",
)
parser.add_option(
"-m", "--mode", action="store_true", help="show file mode"
)
parser.add_option(
"-l", "--links", action="store_true", help="show number of links"
)
parser.add_option(
"-s", "--size", action="store_true", help="show size of file"
)
parser.add_option(
"-n", "--newer", action="store", help="check if file is newer (or same)"
)
parser.add_option(
"-r", "--recurse", action="store_true", help="recurse into directories"
)
parser.add_option(
"-S",
"--sha1",
action="store_true",
help="show sha1 hash of the content",
)
parser.add_option(
"",
"--sha256",
action="store_true",
help="show sha256 hash of the content",
)
parser.add_option(
"-M", "--md5", action="store_true", help="show md5 hash of the content"
)
parser.add_option(
"-D", "--dump", action="store_true", help="dump file content"
)
parser.add_option(
"-H", "--hexdump", action="store_true", help="hexdump file content"
)
parser.add_option(
"-B", "--bytes", type="int", help="number of characters to dump"
)
parser.add_option(
"-L", "--lines", type="int", help="number of lines to dump"
)
parser.add_option(
"-q", "--quiet", action="store_true", help="no default output"
)
(opts, filenames) = parser.parse_args(sys.argv[1:])
if not filenames:
filenames = ['-']
visit(opts, filenames, getattr(sys.stdout, 'buffer', sys.stdout))