rebase: add boolean config item rebase.store-source
This allows to use rebase without recording a rebase_source extra
field. This is useful for example to build a mirror converted from
another SCM (such as svn) by converting only new revisions, and
then incrementally add them to the destination by pulling from the
newly converted (unrelated) repo and rebasing the new revisions
onto the last old already stored changeset. Without this patch the
rebased changesets would always receive some rebase_source that
would depend on the particular history of the conversion process,
instead of only depending on the original source revisions.
This is used to implement a hg mirror repo of SvarDOS (a partially
nonfree but completely redistributable DOS distribution) in the
scripts at https://hg.pushbx.org/ecm/svardos.scr/
In particular, cre.sh creates an svn mirror, upd.sh recreates an
entire hg repo from the svn mirror (which takes too long to do in a
regular job), and akt.sh uses hg convert with the config item
convert.svn.startrev to incrementally convert only the two most
recent revisions already found in the mirror destination plus any
possible new revisions. If any are found, the temporary repo's
changesets are pulled into the destination (as changesets from an
unrelated repository). Then the changesets corresponding to the new
revisions are rebased onto the prior final changeset. (Finally, the
two remaining duplicates of the prior head and its parent are
stripped from the destination repository.)
Without this patch, the particular rebase_source extra field would
depend on the order and times at which akt.sh was used, instead of
only depending on the source repository. In other words, whatever
sequence of upd.sh and akt.sh is used at whatever times, it is
desired that the final output repositories always match each other
exactly.
# Create server
$ hg init server
$ cd server
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
$ cd ../
# Clone server and enable extensions
$ hg clone -q server client
$ cd client
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
# Commit file that will trigger the noop extension
$ echo '[NOOP]' > noop
$ hg commit -Aqm "noop"
# Commit file that will trigger the base64 extension
$ echo '[BASE64]' > base64
$ hg commit -Aqm 'base64'
# Commit file that will trigger the gzip extension
$ echo '[GZIP]' > gzip
$ hg commit -Aqm 'gzip'
# Commit file that will trigger noop and base64
$ echo '[NOOP][BASE64]' > noop-base64
$ hg commit -Aqm 'noop+base64'
# Commit file that will trigger noop and gzip
$ echo '[NOOP][GZIP]' > noop-gzip
$ hg commit -Aqm 'noop+gzip'
# Commit file that will trigger base64 and gzip
$ echo '[BASE64][GZIP]' > base64-gzip
$ hg commit -Aqm 'base64+gzip'
# Commit file that will trigger base64, gzip and noop
$ echo '[BASE64][GZIP][NOOP]' > base64-gzip-noop
$ hg commit -Aqm 'base64+gzip+noop'
# TEST: ensure the revision data is consistent
$ hg cat noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r . base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r . gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r . noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r . noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r . base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r . base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# Push to the server
$ hg push
pushing to $TESTTMP/server
searching for changes
adding changesets
adding manifests
adding file changes
added 7 changesets with 7 changes to 7 files
Ensure the data got to the server OK
$ cd ../server
$ hg cat -r 6e48f4215d24 noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r 6e48f4215d24 base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r 6e48f4215d24 gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r 6e48f4215d24 noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r 6e48f4215d24 noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r 6e48f4215d24 base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r 6e48f4215d24 base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# Initialize new client (not cloning) and setup extension
$ cd ..
$ hg init client2
$ cd client2
$ cat >> .hg/hgrc << EOF
> [paths]
> default = $TESTTMP/server
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
# Pull from server and update to latest revision
$ hg pull default
pulling from $TESTTMP/server
requesting all changes
adding changesets
adding manifests
adding file changes
added 7 changesets with 7 changes to 7 files
new changesets 07b1b9442c5b:6e48f4215d24
(run 'hg update' to get a working copy)
$ hg update
7 files updated, 0 files merged, 0 files removed, 0 files unresolved
# TEST: ensure the revision data is consistent
$ hg cat noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r . base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r . gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r . noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r . noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r . base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r . base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# TEST: ensure a missing processor is handled
$ echo '[FAIL][BASE64][GZIP][NOOP]' > fail-base64-gzip-noop
$ hg commit -Aqm 'fail+base64+gzip+noop'
abort: missing processor for flag '0x1'
[50]
$ rm fail-base64-gzip-noop
# TEST: ensure we cannot register several flag processors on the same flag
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> duplicate=$TESTDIR/flagprocessorext.py
> EOF
$ hg debugrebuilddirstate
Traceback (most recent call last):
File "*/mercurial/extensions.py", line *, in _runextsetup (glob) (no-pyoxidizer !)
File "mercurial.extensions", line *, in _runextsetup (glob) (pyoxidizer !)
extsetup(ui)
File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
flagutil.addflagprocessor( (py38 !)
validatehash, (no-py38 !)
File "*/mercurial/revlogutils/flagutil.py", line *, in addflagprocessor (glob) (no-pyoxidizer !)
File "mercurial.revlogutils.flagutil", line *, in addflagprocessor (glob) (pyoxidizer !)
insertflagprocessor(flag, processor, flagprocessors)
File "*/mercurial/revlogutils/flagutil.py", line *, in insertflagprocessor (glob) (no-pyoxidizer !)
File "mercurial.revlogutils.flagutil", line *, in insertflagprocessor (glob) (pyoxidizer !)
raise error.Abort(msg)
mercurial.error.Abort: cannot register multiple processors on flag '0x8'. (py3 !)
*** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
$ hg st 2>&1 | egrep 'cannot register multiple processors|flagprocessorext'
File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
mercurial.error.Abort: cannot register multiple processors on flag '0x8'. (py3 !)
*** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
File "*/tests/flagprocessorext.py", line *, in b64decode (glob)
$ cd ..
# TEST: bundle repo
$ hg init bundletest
$ cd bundletest
$ cat >> .hg/hgrc << EOF
> [extensions]
> flagprocessor=$TESTDIR/flagprocessorext.py
> EOF
$ for i in 0 single two three 4; do
> echo '[BASE64]a-bit-longer-'$i > base64
> hg commit -m base64-$i -A base64
> done
$ hg update 2 -q
$ echo '[BASE64]a-bit-longer-branching' > base64
$ hg commit -q -m branching
#if repobundlerepo
$ hg bundle --base 1 bundle.hg
4 changesets found
$ hg --config extensions.strip= strip -r 2 --no-backup --force -q
$ hg -R bundle.hg log --stat -T '{rev} {desc}\n' base64
5 branching
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
4 base64-4
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
3 base64-three
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
2 base64-two
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
1 base64-single
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
0 base64-0
base64 | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg bundle -R bundle.hg --base 1 bundle-again.hg -q
$ hg -R bundle-again.hg log --stat -T '{rev} {desc}\n' base64
5 branching
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
4 base64-4
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
3 base64-three
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
2 base64-two
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
1 base64-single
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
0 base64-0
base64 | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ rm bundle.hg bundle-again.hg
#endif
# TEST: hg status
$ hg status
$ hg diff