rebase: add boolean config item rebase.store-source
This allows to use rebase without recording a rebase_source extra
field. This is useful for example to build a mirror converted from
another SCM (such as svn) by converting only new revisions, and
then incrementally add them to the destination by pulling from the
newly converted (unrelated) repo and rebasing the new revisions
onto the last old already stored changeset. Without this patch the
rebased changesets would always receive some rebase_source that
would depend on the particular history of the conversion process,
instead of only depending on the original source revisions.
This is used to implement a hg mirror repo of SvarDOS (a partially
nonfree but completely redistributable DOS distribution) in the
scripts at https://hg.pushbx.org/ecm/svardos.scr/
In particular, cre.sh creates an svn mirror, upd.sh recreates an
entire hg repo from the svn mirror (which takes too long to do in a
regular job), and akt.sh uses hg convert with the config item
convert.svn.startrev to incrementally convert only the two most
recent revisions already found in the mirror destination plus any
possible new revisions. If any are found, the temporary repo's
changesets are pulled into the destination (as changesets from an
unrelated repository). Then the changesets corresponding to the new
revisions are rebased onto the prior final changeset. (Finally, the
two remaining duplicates of the prior head and its parent are
stripped from the destination repository.)
Without this patch, the particular rebase_source extra field would
depend on the order and times at which akt.sh was used, instead of
only depending on the source repository. In other words, whatever
sequence of upd.sh and akt.sh is used at whatever times, it is
desired that the final output repositories always match each other
exactly.
==================================
Basic testing for the push command
==================================
Testing of the '--rev' flag
===========================
$ hg init test-revflag
$ hg -R test-revflag unbundle "$TESTDIR/bundles/remote.hg"
adding changesets
adding manifests
adding file changes
added 9 changesets with 7 changes to 4 files (+1 heads)
new changesets bfaf4b5cbf01:916f1afdef90 (9 drafts)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ for i in 0 1 2 3 4 5 6 7 8; do
> echo
> hg init test-revflag-"$i"
> hg -R test-revflag push -r "$i" test-revflag-"$i"
> hg -R test-revflag-"$i" verify
> done
pushing to test-revflag-0
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 1 changesets with 1 changes to 1 files
pushing to test-revflag-1
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 2 changesets with 2 changes to 1 files
pushing to test-revflag-2
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 3 changesets with 3 changes to 1 files
pushing to test-revflag-3
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 1 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 4 changes to 1 files
pushing to test-revflag-4
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 2 changesets with 2 changes to 1 files
pushing to test-revflag-5
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 3 changesets with 3 changes to 1 files
pushing to test-revflag-6
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 5 changes to 2 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 4 changesets with 5 changes to 2 files
pushing to test-revflag-7
searching for changes
adding changesets
adding manifests
adding file changes
added 5 changesets with 6 changes to 3 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 5 changesets with 6 changes to 3 files
pushing to test-revflag-8
searching for changes
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 2 files
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 5 changesets with 5 changes to 2 files
$ cd test-revflag-8
$ hg pull ../test-revflag-7
pulling from ../test-revflag-7
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 2 changes to 3 files (+1 heads)
new changesets c70afb1ee985:faa2e4234c7a
(run 'hg heads' to see heads, 'hg merge' to merge)
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 9 changesets with 7 changes to 4 files
$ cd ..
Test server side validation during push
=======================================
$ hg init test-validation
$ cd test-validation
$ cat > .hg/hgrc <<EOF
> [server]
> validate=1
> EOF
$ echo alpha > alpha
$ echo beta > beta
$ hg addr
adding alpha
adding beta
$ hg ci -m 1
$ cd ..
$ hg clone test-validation test-validation-clone
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
#if reporevlogstore
Test spurious filelog entries:
$ cd test-validation-clone
$ echo blah >> beta
$ cp .hg/store/data/beta.i tmp1
$ hg ci -m 2
$ cp .hg/store/data/beta.i tmp2
$ hg -q rollback
$ mv tmp2 .hg/store/data/beta.i
$ echo blah >> beta
$ hg ci -m '2 (corrupt)'
Expected to fail:
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
beta@1: dddc47b3ba30 not in manifests
checked 2 changesets with 4 changes to 2 files
1 integrity errors encountered!
(first damaged changeset appears to be 1)
[1]
$ hg push
pushing to $TESTTMP/test-validation
searching for changes
adding changesets
adding manifests
adding file changes
transaction abort!
rollback completed
abort: received spurious file revlog entry
[255]
$ hg -q rollback
$ mv tmp1 .hg/store/data/beta.i
$ echo beta > beta
Test missing filelog entries:
$ cp .hg/store/data/beta.i tmp
$ echo blah >> beta
$ hg ci -m '2 (corrupt)'
$ mv tmp .hg/store/data/beta.i
Expected to fail:
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
beta@1: manifest refers to unknown revision dddc47b3ba30
checked 2 changesets with 2 changes to 2 files
1 integrity errors encountered!
(first damaged changeset appears to be 1)
[1]
$ hg push
pushing to $TESTTMP/test-validation
searching for changes
adding changesets
adding manifests
adding file changes
transaction abort!
rollback completed
abort: missing file data for beta:dddc47b3ba30e54484720ce0f4f768a0f4b6efb9 - run hg verify
[255]
$ cd ..
#endif
Test push hook locking
=====================
$ hg init 1
$ echo '[ui]' >> 1/.hg/hgrc
$ echo 'timeout = 10' >> 1/.hg/hgrc
$ echo foo > 1/foo
$ hg --cwd 1 ci -A -m foo
adding foo
$ hg clone 1 2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg clone 2 3
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat <<EOF > $TESTTMP/debuglocks-pretxn-hook.sh
> hg debuglocks
> true
> EOF
$ echo '[hooks]' >> 2/.hg/hgrc
$ echo "pretxnchangegroup.a = sh $TESTTMP/debuglocks-pretxn-hook.sh" >> 2/.hg/hgrc
$ echo 'changegroup.push = hg push -qf ../1' >> 2/.hg/hgrc
$ echo bar >> 3/foo
$ hg --cwd 3 ci -m bar
$ hg --cwd 3 push ../2 --config devel.legacy.exchange=bundle1
pushing to ../2
searching for changes
adding changesets
adding manifests
adding file changes
lock: user *, process * (*s) (glob)
wlock: free
added 1 changesets with 1 changes to 1 files
$ hg --cwd 1 --config extensions.strip= strip tip -q
$ hg --cwd 2 --config extensions.strip= strip tip -q
$ hg --cwd 3 push ../2 # bundle2+
pushing to ../2
searching for changes
adding changesets
adding manifests
adding file changes
lock: user *, process * (*s) (glob)
wlock: user *, process * (*s) (glob)
added 1 changesets with 1 changes to 1 files
Test bare push with multiple race checking options
--------------------------------------------------
$ hg init test-bare-push-no-concurrency
$ hg init test-bare-push-unrelated-concurrency
$ hg -R test-revflag push -r 0 test-bare-push-no-concurrency --config server.concurrent-push-mode=strict
pushing to test-bare-push-no-concurrency
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
$ hg -R test-revflag push -r 0 test-bare-push-unrelated-concurrency --config server.concurrent-push-mode=check-related
pushing to test-bare-push-unrelated-concurrency
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
SEC: check for unsafe ssh url
$ cat >> $HGRCPATH << EOF
> [ui]
> ssh = sh -c "read l; read l; read l"
> EOF
$ hg -R test-revflag push 'ssh://-oProxyCommand=touch${IFS}owned/path'
pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
[255]
$ hg -R test-revflag push 'ssh://%2DoProxyCommand=touch${IFS}owned/path'
pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
[255]
$ hg -R test-revflag push 'ssh://fakehost|touch${IFS}owned/path'
pushing to ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
abort: no suitable response from remote hg
[255]
$ hg -R test-revflag push 'ssh://fakehost%7Ctouch%20owned/path'
pushing to ssh://fakehost%7Ctouch%20owned/path
abort: no suitable response from remote hg
[255]
$ [ ! -f owned ] || echo 'you got owned'
Test `commands.push.require-revs`
---------------------------------
$ hg clone -q test-revflag test-require-revs-source
$ hg init test-require-revs-dest
$ cd test-require-revs-source
$ cat >> .hg/hgrc << EOF
> [paths]
> default = ../test-require-revs-dest
> [commands]
> push.require-revs=1
> EOF
$ hg push
pushing to $TESTTMP/test-require-revs-dest
abort: no revisions specified to push
(did you mean "hg push -r ."?)
[10]
$ hg push -r 0
pushing to $TESTTMP/test-require-revs-dest
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
$ hg bookmark -r 0 push-this-bookmark
(test that -B (bookmark) works for specifying "revs")
$ hg push -B push-this-bookmark
pushing to $TESTTMP/test-require-revs-dest
searching for changes
no changes found
exporting bookmark push-this-bookmark
[1]
(test that -b (branch) works for specifying "revs")
$ hg push -b default
pushing to $TESTTMP/test-require-revs-dest
searching for changes
abort: push creates new remote head [0-9a-f]+ (re)
(merge or see 'hg help push' for details about pushing new heads)
[20]
(demonstrate that even though we don't have anything to exchange, we're still
showing the error)
$ hg push
pushing to $TESTTMP/test-require-revs-dest
abort: no revisions specified to push
(did you mean "hg push -r ."?)
[10]
$ hg push --config paths.default:pushrev=0
pushing to $TESTTMP/test-require-revs-dest
searching for changes
no changes found
[1]