view tests/test-audit-path.t @ 43564:d053d3f10b6a

packaging: stage installed files for Inno

Previously, the Inno installer maintained its own mapping of
source files to install location. (We have to maintain a
similar mapping in the WiX installer.)

Managing the explicit file layout for Windows packages is
cumbersome and redundant. Every time you want to change the
layout you need to change N locations. We frequently forget
to do this and we only find out when people install Mercurial
from our packages at release time.

This commit starts the process of consolidating and simplifying
the logic for managing the install layout on Windows.

We introduce a list of install layout rules. These are simply
source filenames (which can contain wildcards) and destination
paths.

The Inno packaging code has been updated to assemble all
files into a staging directory that mirrors the final install
layout. The list of files to add to the installer is derived
by walking this staging directory and dynamically emitting
the proper entries for the Inno Setup script.

I diffed the file layout before and after this commit and
there is no difference.

Another benefit of this change is that it facilitates easier
testing of the Windows install layout. Before, in order to
test the final install layout, you needed to build an installer
and run it. Now, you can stage files into the final layout
and test from there, without running the installer. This
should cut down on overhead when changing Windows code.

Differential Revision: https://phab.mercurial-scm.org/D7159

The simple store doesn't escape paths robustly and can't store paths
with periods, etc. So much of this test fails with it.
#require no-reposimplestore

  $ hg init

audit of .hg

  $ hg add .hg/00changelog.i
  abort: path contains illegal component: .hg/00changelog.i
  [255]

#if symlink

Symlinks

  $ mkdir a
  $ echo a > a/a
  $ hg ci -Ama
  adding a/a
  $ ln -s a b
  $ echo b > a/b
  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]
  $ hg add b

should still fail - maybe

  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]

  $ hg commit -m 'add symlink b'


Test symlink traversing when accessing history:
-----------------------------------------------

(build a changeset where the path exists as a directory)

  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkdir b
  $ echo c > b/a
  $ hg add b/a
  $ hg ci -m 'add directory b'
  created new head

Test that hg cat does not do anything wrong the working copy has 'b' as directory

  $ hg cat b/a
  c
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

Test that hg cat does not do anything wrong the working copy has 'b' as a symlink (issue4749)

  $ hg up 'desc(symlink)'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg cat b/a
  b/a: no such file in rev bc151a1f53bd
  [1]
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

#endif


unbundle tampered bundle

  $ hg init target
  $ cd target
  $ hg unbundle "$TESTDIR/bundles/tampered.hg"
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 6 files (+4 heads)
  new changesets b7da9bf6b037:fc1393d727bc (5 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)

attack .hg/test

  $ hg manifest -r0
  .hg/test
  $ hg update -Cr0
  abort: path contains illegal component: .hg/test
  [255]

attack foo/.hg/test

  $ hg manifest -r1
  foo/.hg/test
  $ hg update -Cr1
  abort: path 'foo/.hg/test' is inside nested repo 'foo'
  [255]

attack back/test where back symlinks to ..

  $ hg manifest -r2
  back
  back/test
#if symlink
  $ hg update -Cr2
  abort: path 'back/test' traverses symbolic link 'back'
  [255]
#else
('back' will be a file and cause some other system specific error)
  $ hg update -Cr2
  abort: $TESTTMP/target/back/test: $ENOTDIR$
  [255]
#endif

attack ../test

  $ hg manifest -r3
  ../test
  $ mkdir ../test
  $ echo data > ../test/file
  $ hg update -Cr3
  abort: path contains illegal component: ../test
  [255]
  $ cat ../test/file
  data

attack /tmp/test

  $ hg manifest -r4
  /tmp/test
  $ hg update -Cr4
  abort: path contains illegal component: /tmp/test
  [255]

  $ cd ..

Test symlink traversal on merge:
--------------------------------

#if symlink

set up symlink hell

  $ mkdir merge-symlink-out
  $ hg init merge-symlink
  $ cd merge-symlink
  $ touch base
  $ hg commit -qAm base
  $ ln -s ../merge-symlink-out a
  $ hg commit -qAm 'symlink a -> ../merge-symlink-out'
  $ hg up -q 0
  $ mkdir a
  $ touch a/poisoned
  $ hg commit -qAm 'file a/poisoned'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: file a/poisoned
  |
  | o  1: symlink a -> ../merge-symlink-out
  |/
  o  0: base
  

try trivial merge

  $ hg up -qC 1
  $ hg merge 2
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]

try rebase onto other revision: cache of audited paths should be discarded,
and the rebase should fail (issue5628)

  $ hg up -qC 2
  $ hg rebase -s 2 -d 1 --config extensions.rebase=
  rebasing 2:e73c21d6b244 "file a/poisoned" (tip)
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]
  $ ls ../merge-symlink-out

  $ cd ..

Test symlink traversal on update:
---------------------------------

  $ mkdir update-symlink-out
  $ hg init update-symlink
  $ cd update-symlink
  $ ln -s ../update-symlink-out a
  $ hg commit -qAm 'symlink a -> ../update-symlink-out'
  $ hg rm a
  $ mkdir a && touch a/b
  $ hg ci -qAm 'file a/b' a/b
  $ hg up -qC 0
  $ hg rm a
  $ mkdir a && touch a/c
  $ hg ci -qAm 'rm a, file a/c'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: rm a, file a/c
  |
  | o  1: file a/b
  |/
  o  0: symlink a -> ../update-symlink-out
  

try linear update where symlink already exists:

  $ hg up -qC 0
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]

try linear update including symlinked directory and its content: paths are
audited first by calculateupdates(), where no symlink is created so both
'a' and 'a/b' are taken as good paths. still applyupdates() should fail.

  $ hg up -qC null
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

try branch update replacing directory with symlink, and its content: the
path 'a' is audited as a directory first, which should be audited again as
a symlink.

  $ rm -f a
  $ hg up -qC 2
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

  $ cd ..

#endif