view tests/test-diffstat.t @ 43564:d053d3f10b6a

packaging: stage installed files for Inno

Previously, the Inno installer maintained its own mapping of
source files to install location. (We have to maintain a
similar mapping in the WiX installer.)

Managing the explicit file layout for Windows packages is
cumbersome and redundant. Every time you want to change the
layout you need to change N locations. We frequently forget
to do this and we only find out when people install Mercurial
from our packages at release time.

This commit starts the process of consolidating and simplifying
the logic for managing the install layout on Windows.

We introduce a list of install layout rules. These are simply
source filenames (which can contain wildcards) and destination
paths.

The Inno packaging code has been updated to assemble all
files into a staging directory that mirrors the final install
layout. The list of files to add to the installer is derived
by walking this staging directory and dynamically emitting
the proper entries for the Inno Setup script.

I diffed the file layout before and after this commit and
there is no difference.

Another benefit of this change is that it facilitates easier
testing of the Windows install layout. Before, in order to
test the final install layout, you needed to build an installer
and run it. Now, you can stage files into the final layout
and test from there, without running the installer. This
should cut down on overhead when changing Windows code.

Differential Revision: https://phab.mercurial-scm.org/D7159

  $ hg init repo
  $ cd repo
  $ i=0; while [ "$i" -lt 213 ]; do echo a >> a; i=`expr $i + 1`; done
  $ hg add a
  $ cp a b
  $ hg add b

Wide diffstat:

  $ hg diff --stat
   a |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   b |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

diffstat width:

  $ COLUMNS=24 hg diff --config ui.interactive=true --stat
   a |  213 ++++++++++++++
   b |  213 ++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

  $ hg ci -m adda

  $ cat >> a <<EOF
  > a
  > a
  > a
  > EOF

Narrow diffstat:

  $ hg diff --stat
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)

  $ hg ci -m appenda

  >>> open("c", "wb").write(b"\0") and None
  $ touch d
  $ hg add c d

Binary diffstat:

  $ hg diff --stat
   c |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Binary git diffstat:

  $ hg diff --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg ci -m createb

  >>> open("file with spaces", "wb").write(b"\0") and None
  $ hg add "file with spaces"

Filename with spaces diffstat:

  $ hg diff --stat
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename with spaces git diffstat:

  $ hg diff --stat --git
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename without "a/" or "b/" (issue5759):

  $ hg diff --config 'diff.noprefix=1' -c1 --stat --git
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  $ hg diff --config 'diff.noprefix=1' -c2 --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg log --config 'diff.noprefix=1' -r '1:' -p --stat --git
  changeset:   1:3a95b07bb77f
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     appenda
  
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  
  diff --git a a
  --- a
  +++ a
  @@ -211,3 +211,6 @@
   a
   a
   a
  +a
  +a
  +a
  
  changeset:   2:c60a6c753773
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     createb
  
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)
  
  diff --git c c
  new file mode 100644
  index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..f76dd238ade08917e6712764a16a22005a50573d
  GIT binary patch
  literal 1
  Ic${MZ000310RR91
  
  diff --git d d
  new file mode 100644
  

diffstat within directories:

  $ hg rm -f 'file with spaces'

  $ mkdir dir1 dir2
  $ echo new1 > dir1/new
  $ echo new2 > dir2/new
  $ hg add dir1/new dir2/new
  $ hg diff --stat
   dir1/new |  1 +
   dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1 dir2
  warning: dir2 not inside relative root dir1

  $ hg diff --stat --root dir1 -I dir1/old

  $ cd dir1
  $ hg diff --stat .
   dir1/new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat --root .
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
--root trumps ui.relative-paths
  $ hg diff --stat --root .. --config ui.relative-paths=yes
   new         |  1 +
   ../dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)
  $ hg diff --stat --root ../dir1 ../dir2
  warning: ../dir2 not inside relative root .

  $ hg diff --stat --root . -I old

  $ cd ..

Files with lines beginning with '--' or '++' should be properly counted in diffstat

  $ hg up -Cr tip
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm dir1/new
  $ rm dir2/new
  $ rm "file with spaces"
  $ cat > file << EOF
  > line 1
  > line 2
  > line 3
  > EOF
  $ hg commit -Am file
  adding file

Lines added starting with '--' should count as additions
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes
  > line 3
  > EOF

  $ hg diff --root .
  diff -r be1569354b24 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  -line 2
  +-- line 2, with dashes
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
  $ hg commit -m filev2
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes, changed again
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +-- line 2, with dashes, changed again
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
and starting with '++' should count as additions
  $ cat > file << EOF
  > line 1
  > ++ line 2, switched dashes to plusses
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +++ line 2, switched dashes to plusses
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

When a file is renamed, --git shouldn't loss the info about old file
  $ hg init issue6025
  $ cd issue6025
  $ echo > a
  $ hg ci -Am 'add a'
  adding a
  $ hg mv a b
  $ hg diff --git
  diff --git a/a b/b
  rename from a
  rename to b
  $ hg diff --stat
   a |  1 -
   b |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   a => b |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)
-- filename may contain whitespaces
  $ echo > c
  $ hg ci -Am 'add c'
  adding c
  $ hg mv c 'new c'
  $ hg diff --git
  diff --git a/c b/new c
  rename from c
  rename to new c
  $ hg diff --stat
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   c => new c |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)

Make sure `diff --stat -q --config diff.git-0` shows stat (issue4037)

  $ hg status
  A new c
  R c
  $ hg diff --stat -q
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)