view tests/test-http-api-httpv2.t @ 42903:d7304434390f

changegroup: move message about added changes to transaction summary

Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:

    adding changesets
    adding manifests
    adding file changes
    added 32768 changesets with 60829 changes to 2668 files
    adding changesets
    adding manifests
    adding file changes
    added 8192 changesets with 16885 changes to 1553 files
    adding changesets
    adding manifests
    adding file changes
    added 1020 changesets with 1799 changes to 536 files
    adding changesets
    adding manifests
    ...

Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.

There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.

This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.

To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.

#require no-chg

  $ . $TESTDIR/wireprotohelpers.sh
  $ enabledummycommands

  $ hg init server
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > EOF
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

HTTP v2 protocol not enabled by default

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003 HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 33\r\n
  s>     \r\n
  s>     API exp-http-v2-0003 not enabled\n

Restart server with support for HTTP v2 API

  $ killdaemons.py
  $ enablehttpv2 server
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

Request to unknown command yields 404

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

GET to read-only command yields a 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Missing Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: invalid
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: invalid\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Content-Type header results in 415

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     user-agent: test
  >     content-type: badmedia
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: badmedia\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 415 Unsupported Media Type\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 88\r\n
  s>     \r\n
  s>     client MUST send Content-Type header with value: application/mercurial-exp-framing-0006\n

Request to read-only command works out of the box

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

  $ sendhttpv2peerverbose << EOF
  > command customreadonly
  > EOF
  creating http peer for wire protocol version 2
  sending customreadonly command
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 65\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x15\x00\x00\x01\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041
  s>     X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: gen[
    b'customreadonly bytes response'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

Request to read-write command fails because server is read-only by default

GET to read-write request yields 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Even for unknown commands

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

SSL required by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 403 ssl required\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Length: 17\r\n
  s>     \r\n
  s>     permission denied

Restart server to allow non-ssl read-write operations

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Authorized request for valid read-write command works

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Authorized request for unknown command is rejected

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/badcommand
  >     user-agent: test
  >     accept: $MEDIATYPE
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

debugreflect isn't enabled by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 34\r\n
  s>     \r\n
  s>     debugreflect service not available

Restart server to get debugreflect endpoint

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Command frames can be reflected via debugreflect

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'command1', b'args': {b'foo': b'val1', b'bar1': b'val'}}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 47\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \'\x00\x00\x01\x00\x01\x01\x11\xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 223\r\n
  s>     \r\n
  s>     received: 1 1 1 \xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1\n
  s>     ["runcommand", {"args": {"bar1": "val", "foo": "val1"}, "command": "command1", "data": null, "redirect": null, "requestid": 1}]\n
  s>     received: <no frame>\n
  s>     {"action": "noop"}

Multiple requests to regular command URL are not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Multiple requests to "multirequest" URL are allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  >     frame 3 1 0 command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     *\r\n (glob)
  s>     user-agent: test\r\n
  s>     content-length: 58\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly\x15\x00\x00\x03\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x03\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Interleaved requests to "multirequest" are processed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request continuation JnamespacesDnameHlistkeys
  >     frame 1 1 0 command-request continuation IbookmarksDnameHlistkeys
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 115\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x11\x00\x00\x01\x00\x01\x01\x15\xa2Dargs\xa1Inamespace\x11\x00\x00\x03\x00\x01\x00\x15\xa2Dargs\xa1Inamespace\x19\x00\x00\x03\x00\x01\x00\x12JnamespacesDnameHlistkeys\x18\x00\x00\x01\x00\x01\x00\x12IbookmarksDnameHlistkeys
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x03\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     28\r\n
  s>      \x00\x00\x03\x00\x02\x041\xa3Ibookmarks@Jnamespaces@Fphases@
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     9\r\n
  s>     \x01\x00\x00\x01\x00\x02\x041\xa0
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Restart server to disable read-write access

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Attempting to run a read-write command via multirequest on read-only URL is not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'pushkey'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 22\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x0e\x00\x00\x01\x00\x01\x01\x11\xa1DnameGpushkey
  s> makefile('rb', None)
  s>     HTTP/1.1 403 Forbidden\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 52\r\n
  s>     \r\n
  s>     insufficient permissions to execute command: pushkey

Defining an invalid content encoding results in warning

  $ hg --config experimental.httppeer.v2-encoder-order=identity,badencoder --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  wire protocol version 2 encoder referenced in config (badencoder) is not known; ignoring
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 56\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  s>     1e\r\n
  s>     \x16\x00\x00\x01\x00\x02\x041
  s>     \x81T\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#if zstd

  $ hg --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 70\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     *\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x83Hzstd-8mbDzlibHidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hzstd-8mb
  s>     \r\n
  s>     25\r\n
  s>     \x1d\x00\x00\x01\x00\x02\x042
  s>     (\xb5/\xfd\x00X\xa4\x00\x00p\xa1FstatusBok\x81T\x00\x01\x00\tP\x02
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#endif

  $ cat error.log