view tests/test-narrow-exchange.t @ 42903:d7304434390f

changegroup: move message about added changes to transaction summary

Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:

    adding changesets
    adding manifests
    adding file changes
    added 32768 changesets with 60829 changes to 2668 files
    adding changesets
    adding manifests
    adding file changes
    added 8192 changesets with 16885 changes to 1553 files
    adding changesets
    adding manifests
    adding file changes
    added 1020 changesets with 1799 changes to 536 files
    adding changesets
    adding manifests
    ...

Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.

There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.

This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.

To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.

#testcases lfs-on lfs-off

#if lfs-on
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > lfs =
  > EOF
#endif

  $ . "$TESTDIR/narrow-library.sh"

create full repo

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF

  $ mkdir inside
  $ echo 1 > inside/f
  $ mkdir inside2
  $ echo 1 > inside2/f
  $ mkdir outside
  $ echo 1 > outside/f
  $ hg ci -Aqm 'initial'

  $ echo 2 > inside/f
  $ hg ci -qm 'inside 2'

  $ echo 2 > inside2/f
  $ hg ci -qm 'inside2 2'

  $ echo 2 > outside/f
  $ hg ci -qm 'outside 2'

  $ cd ..

  $ hg clone --narrow ssh://user@dummy/master narrow --include inside
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files
  new changesets *:* (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone --narrow ssh://user@dummy/master narrow2 --include inside --include inside2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Can push to wider repo if change does not affect paths in wider repo that are
not also in narrower repo

  $ cd narrow
  $ echo 3 > inside/f
  $ hg ci -m 'inside 3'
  $ hg push ssh://user@dummy/narrow2
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrower repo if change affects only paths within remote's
narrow spec

  $ cd ../narrow2
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ hg co -r 'desc("inside 3")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 4 > inside/f
  $ hg ci -m 'inside 4'
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrow repo if change affects only paths outside remote's
narrow spec

  $ echo 3 > inside2/f
  $ hg ci -m 'inside2 3'
TODO: this should be successful
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: transaction abort!
  remote: rollback completed
  remote: abort: data/inside2/f.i@4a1aa07735e6: unknown parent! (reporevlogstore !)
  remote: abort: data/inside2/f/index@4a1aa07735e6: no node! (reposimplestore !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4)
  [255]

Can pull from wider repo if change affects only paths outside remote's
narrow spec
  $ echo 4 > inside2/f
  $ hg ci -m 'inside2 4'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg log -G -T '{rev} {node|short} {files}\n'
  o  4 ba3480e2f9de inside/f
  |
  @  3 4e5edd526618 inside/f
  |
  o  2 81e7e07b7ab0 outside/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ hg pull ssh://user@dummy/narrow2
  pulling from ssh://user@dummy/narrow2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets d78a96df731d
  (run 'hg update' to get a working copy)

Check that the resulting history is valid in the full repo

  $ cd ../narrow2
  $ hg push ssh://user@dummy/master
  pushing to ssh://user@dummy/master
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 4 changes to 2 files
  $ cd ../master
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 8 changesets with 10 changes to 3 files

Can not push to wider repo if change affects paths in wider repo that are
not also in narrower repo
  $ cd ../master
  $ hg co -r 'desc("inside2 4")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 5 > inside2/f
  $ hg ci -m 'inside2 5'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  8 5970befb64ba inside2/f
  |
  o  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets * (glob)
  (run 'hg update' to get a working copy)
TODO: this should tell the user that their narrow clone does not have the
necessary content to be able to push to the target

TODO: lfs shouldn't abort like this
  $ hg push ssh://user@dummy/narrow2 || true
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 0 changes to 0 files (no-lfs-on !)
  remote: error: pretxnchangegroup.lfs hook raised an exception: data/inside2/f.i@f59b4e021835: no match found (lfs-on !)
  remote: transaction abort! (lfs-on !)
  remote: rollback completed (lfs-on !)
  remote: abort: data/inside2/f.i@f59b4e021835: no match found! (lfs-on !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4) (lfs-on !)