templatekw: expose color name in {namespaces} entries
Templates make use of a "log.<namespace>" label. The <namespace> value
here differs from the actual namespace name in that the namespace
itself is plural but the label/color value is singular.
Expose the color name to the templating layer so log.* labels
can be emitted for {namespaces}.
As part of this, we refactored the logic to eliminate a gnarly
comprehension. We store color names in their own dict because the
lookup can occur in tight loops and we shouldn't have to go to
repo.names[ns] multiple times for every changeset.
# dagop.py - graph ancestry and topology algorithm for revset
#
# Copyright 2010 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import heapq
from . import (
error,
mdiff,
node,
patch,
smartset,
)
baseset = smartset.baseset
generatorset = smartset.generatorset
# possible maximum depth between null and wdir()
_maxlogdepth = 0x80000000
def _genrevancestors(repo, revs, followfirst, startdepth, stopdepth):
if followfirst:
cut = 1
else:
cut = None
if startdepth is None:
startdepth = 0
if stopdepth is None:
stopdepth = _maxlogdepth
if stopdepth == 0:
return
if stopdepth < 0:
raise error.ProgrammingError('negative stopdepth')
cl = repo.changelog
# load input revs lazily to heap so earlier revisions can be yielded
# without fully computing the input revs
revs.sort(reverse=True)
irevs = iter(revs)
pendingheap = [] # [(-rev, depth), ...] (i.e. lower depth first)
inputrev = next(irevs, None)
if inputrev is not None:
heapq.heappush(pendingheap, (-inputrev, 0))
lastrev = None
while pendingheap:
currev, curdepth = heapq.heappop(pendingheap)
currev = -currev
if currev == inputrev:
inputrev = next(irevs, None)
if inputrev is not None:
heapq.heappush(pendingheap, (-inputrev, 0))
# rescan parents until curdepth >= startdepth because queued entries
# of the same revision are iterated from the lowest depth
foundnew = (currev != lastrev)
if foundnew and curdepth >= startdepth:
lastrev = currev
yield currev
pdepth = curdepth + 1
if foundnew and pdepth < stopdepth:
try:
for prev in cl.parentrevs(currev)[:cut]:
if prev != node.nullrev:
heapq.heappush(pendingheap, (-prev, pdepth))
except error.WdirUnsupported:
for pctx in repo[currev].parents()[:cut]:
if pctx.rev() != node.nullrev:
heapq.heappush(pendingheap, (-pctx.rev(), pdepth))
def revancestors(repo, revs, followfirst, startdepth=None, stopdepth=None):
"""Like revlog.ancestors(), but supports additional options, includes
the given revs themselves, and returns a smartset
Scan ends at the stopdepth (exlusive) if specified. Revisions found
earlier than the startdepth are omitted.
"""
gen = _genrevancestors(repo, revs, followfirst, startdepth, stopdepth)
return generatorset(gen, iterasc=False)
def revdescendants(repo, revs, followfirst):
"""Like revlog.descendants() but supports followfirst."""
if followfirst:
cut = 1
else:
cut = None
def iterate():
cl = repo.changelog
# XXX this should be 'parentset.min()' assuming 'parentset' is a
# smartset (and if it is not, it should.)
first = min(revs)
nullrev = node.nullrev
if first == nullrev:
# Are there nodes with a null first parent and a non-null
# second one? Maybe. Do we care? Probably not.
for i in cl:
yield i
else:
seen = set(revs)
for i in cl.revs(first + 1):
for x in cl.parentrevs(i)[:cut]:
if x != nullrev and x in seen:
seen.add(i)
yield i
break
return generatorset(iterate(), iterasc=True)
def _reachablerootspure(repo, minroot, roots, heads, includepath):
"""return (heads(::<roots> and ::<heads>))
If includepath is True, return (<roots>::<heads>)."""
if not roots:
return []
parentrevs = repo.changelog.parentrevs
roots = set(roots)
visit = list(heads)
reachable = set()
seen = {}
# prefetch all the things! (because python is slow)
reached = reachable.add
dovisit = visit.append
nextvisit = visit.pop
# open-code the post-order traversal due to the tiny size of
# sys.getrecursionlimit()
while visit:
rev = nextvisit()
if rev in roots:
reached(rev)
if not includepath:
continue
parents = parentrevs(rev)
seen[rev] = parents
for parent in parents:
if parent >= minroot and parent not in seen:
dovisit(parent)
if not reachable:
return baseset()
if not includepath:
return reachable
for rev in sorted(seen):
for parent in seen[rev]:
if parent in reachable:
reached(rev)
return reachable
def reachableroots(repo, roots, heads, includepath=False):
"""return (heads(::<roots> and ::<heads>))
If includepath is True, return (<roots>::<heads>)."""
if not roots:
return baseset()
minroot = roots.min()
roots = list(roots)
heads = list(heads)
try:
revs = repo.changelog.reachableroots(minroot, heads, roots, includepath)
except AttributeError:
revs = _reachablerootspure(repo, minroot, roots, heads, includepath)
revs = baseset(revs)
revs.sort()
return revs
def _changesrange(fctx1, fctx2, linerange2, diffopts):
"""Return `(diffinrange, linerange1)` where `diffinrange` is True
if diff from fctx2 to fctx1 has changes in linerange2 and
`linerange1` is the new line range for fctx1.
"""
blocks = mdiff.allblocks(fctx1.data(), fctx2.data(), diffopts)
filteredblocks, linerange1 = mdiff.blocksinrange(blocks, linerange2)
diffinrange = any(stype == '!' for _, stype in filteredblocks)
return diffinrange, linerange1
def blockancestors(fctx, fromline, toline, followfirst=False):
"""Yield ancestors of `fctx` with respect to the block of lines within
`fromline`-`toline` range.
"""
diffopts = patch.diffopts(fctx._repo.ui)
introrev = fctx.introrev()
if fctx.rev() != introrev:
fctx = fctx.filectx(fctx.filenode(), changeid=introrev)
visit = {(fctx.linkrev(), fctx.filenode()): (fctx, (fromline, toline))}
while visit:
c, linerange2 = visit.pop(max(visit))
pl = c.parents()
if followfirst:
pl = pl[:1]
if not pl:
# The block originates from the initial revision.
yield c, linerange2
continue
inrange = False
for p in pl:
inrangep, linerange1 = _changesrange(p, c, linerange2, diffopts)
inrange = inrange or inrangep
if linerange1[0] == linerange1[1]:
# Parent's linerange is empty, meaning that the block got
# introduced in this revision; no need to go futher in this
# branch.
continue
# Set _descendantrev with 'c' (a known descendant) so that, when
# _adjustlinkrev is called for 'p', it receives this descendant
# (as srcrev) instead possibly topmost introrev.
p._descendantrev = c.rev()
visit[p.linkrev(), p.filenode()] = p, linerange1
if inrange:
yield c, linerange2
def blockdescendants(fctx, fromline, toline):
"""Yield descendants of `fctx` with respect to the block of lines within
`fromline`-`toline` range.
"""
# First possibly yield 'fctx' if it has changes in range with respect to
# its parents.
try:
c, linerange1 = next(blockancestors(fctx, fromline, toline))
except StopIteration:
pass
else:
if c == fctx:
yield c, linerange1
diffopts = patch.diffopts(fctx._repo.ui)
fl = fctx.filelog()
seen = {fctx.filerev(): (fctx, (fromline, toline))}
for i in fl.descendants([fctx.filerev()]):
c = fctx.filectx(i)
inrange = False
for x in fl.parentrevs(i):
try:
p, linerange2 = seen[x]
except KeyError:
# nullrev or other branch
continue
inrangep, linerange1 = _changesrange(c, p, linerange2, diffopts)
inrange = inrange or inrangep
# If revision 'i' has been seen (it's a merge), we assume that its
# line range is the same independently of which parents was used
# to compute it.
assert i not in seen or seen[i][1] == linerange1, (
'computed line range for %s is not consistent between '
'ancestor branches' % c)
seen[i] = c, linerange1
if inrange:
yield c, linerange1
def toposort(revs, parentsfunc, firstbranch=()):
"""Yield revisions from heads to roots one (topo) branch at a time.
This function aims to be used by a graph generator that wishes to minimize
the number of parallel branches and their interleaving.
Example iteration order (numbers show the "true" order in a changelog):
o 4
|
o 1
|
| o 3
| |
| o 2
|/
o 0
Note that the ancestors of merges are understood by the current
algorithm to be on the same branch. This means no reordering will
occur behind a merge.
"""
### Quick summary of the algorithm
#
# This function is based around a "retention" principle. We keep revisions
# in memory until we are ready to emit a whole branch that immediately
# "merges" into an existing one. This reduces the number of parallel
# branches with interleaved revisions.
#
# During iteration revs are split into two groups:
# A) revision already emitted
# B) revision in "retention". They are stored as different subgroups.
#
# for each REV, we do the following logic:
#
# 1) if REV is a parent of (A), we will emit it. If there is a
# retention group ((B) above) that is blocked on REV being
# available, we emit all the revisions out of that retention
# group first.
#
# 2) else, we'll search for a subgroup in (B) awaiting for REV to be
# available, if such subgroup exist, we add REV to it and the subgroup is
# now awaiting for REV.parents() to be available.
#
# 3) finally if no such group existed in (B), we create a new subgroup.
#
#
# To bootstrap the algorithm, we emit the tipmost revision (which
# puts it in group (A) from above).
revs.sort(reverse=True)
# Set of parents of revision that have been emitted. They can be considered
# unblocked as the graph generator is already aware of them so there is no
# need to delay the revisions that reference them.
#
# If someone wants to prioritize a branch over the others, pre-filling this
# set will force all other branches to wait until this branch is ready to be
# emitted.
unblocked = set(firstbranch)
# list of groups waiting to be displayed, each group is defined by:
#
# (revs: lists of revs waiting to be displayed,
# blocked: set of that cannot be displayed before those in 'revs')
#
# The second value ('blocked') correspond to parents of any revision in the
# group ('revs') that is not itself contained in the group. The main idea
# of this algorithm is to delay as much as possible the emission of any
# revision. This means waiting for the moment we are about to display
# these parents to display the revs in a group.
#
# This first implementation is smart until it encounters a merge: it will
# emit revs as soon as any parent is about to be emitted and can grow an
# arbitrary number of revs in 'blocked'. In practice this mean we properly
# retains new branches but gives up on any special ordering for ancestors
# of merges. The implementation can be improved to handle this better.
#
# The first subgroup is special. It corresponds to all the revision that
# were already emitted. The 'revs' lists is expected to be empty and the
# 'blocked' set contains the parents revisions of already emitted revision.
#
# You could pre-seed the <parents> set of groups[0] to a specific
# changesets to select what the first emitted branch should be.
groups = [([], unblocked)]
pendingheap = []
pendingset = set()
heapq.heapify(pendingheap)
heappop = heapq.heappop
heappush = heapq.heappush
for currentrev in revs:
# Heap works with smallest element, we want highest so we invert
if currentrev not in pendingset:
heappush(pendingheap, -currentrev)
pendingset.add(currentrev)
# iterates on pending rev until after the current rev have been
# processed.
rev = None
while rev != currentrev:
rev = -heappop(pendingheap)
pendingset.remove(rev)
# Seek for a subgroup blocked, waiting for the current revision.
matching = [i for i, g in enumerate(groups) if rev in g[1]]
if matching:
# The main idea is to gather together all sets that are blocked
# on the same revision.
#
# Groups are merged when a common blocking ancestor is
# observed. For example, given two groups:
#
# revs [5, 4] waiting for 1
# revs [3, 2] waiting for 1
#
# These two groups will be merged when we process
# 1. In theory, we could have merged the groups when
# we added 2 to the group it is now in (we could have
# noticed the groups were both blocked on 1 then), but
# the way it works now makes the algorithm simpler.
#
# We also always keep the oldest subgroup first. We can
# probably improve the behavior by having the longest set
# first. That way, graph algorithms could minimise the length
# of parallel lines their drawing. This is currently not done.
targetidx = matching.pop(0)
trevs, tparents = groups[targetidx]
for i in matching:
gr = groups[i]
trevs.extend(gr[0])
tparents |= gr[1]
# delete all merged subgroups (except the one we kept)
# (starting from the last subgroup for performance and
# sanity reasons)
for i in reversed(matching):
del groups[i]
else:
# This is a new head. We create a new subgroup for it.
targetidx = len(groups)
groups.append(([], {rev}))
gr = groups[targetidx]
# We now add the current nodes to this subgroups. This is done
# after the subgroup merging because all elements from a subgroup
# that relied on this rev must precede it.
#
# we also update the <parents> set to include the parents of the
# new nodes.
if rev == currentrev: # only display stuff in rev
gr[0].append(rev)
gr[1].remove(rev)
parents = [p for p in parentsfunc(rev) if p > node.nullrev]
gr[1].update(parents)
for p in parents:
if p not in pendingset:
pendingset.add(p)
heappush(pendingheap, -p)
# Look for a subgroup to display
#
# When unblocked is empty (if clause), we were not waiting for any
# revisions during the first iteration (if no priority was given) or
# if we emitted a whole disconnected set of the graph (reached a
# root). In that case we arbitrarily take the oldest known
# subgroup. The heuristic could probably be better.
#
# Otherwise (elif clause) if the subgroup is blocked on
# a revision we just emitted, we can safely emit it as
# well.
if not unblocked:
if len(groups) > 1: # display other subset
targetidx = 1
gr = groups[1]
elif not gr[1] & unblocked:
gr = None
if gr is not None:
# update the set of awaited revisions with the one from the
# subgroup
unblocked |= gr[1]
# output all revisions in the subgroup
for r in gr[0]:
yield r
# delete the subgroup that you just output
# unless it is groups[0] in which case you just empty it.
if targetidx:
del groups[targetidx]
else:
gr[0][:] = []
# Check if we have some subgroup waiting for revisions we are not going to
# iterate over
for g in groups:
for r in g[0]:
yield r