wireproto: move clonebundles command from extension (issue4931)
The SSH peer class accesses wireproto.commands[cmd] as part of encoding
command arguments. Previously, the wire protocol command was defined in
the clonebundles extension. If the client didn't have this extension
enabled (which it likely doesn't since it is meant as a server-side
extension), then clients attempting to clone via ssh:// would get a
crash due to a KeyError accessing wireproto.commands['clonebundles']
when cloning from a server that is advertising clone bundles.
Moving the definition of the wire protocol command to wireproto.py makes
this problem go away.
A side effect of this code move is servers will always respond to
"clonebundles" wire protocol command requests. This should be fine: the
server will return an empty response unless a clone bundles manifest
file is present and clients shouldn't call the command unless the server
is advertising the capability, which only happens if the clonebundles
extension is enabled and the manifest file exists.
#require icasefs
################################
test for branch merging
################################
test for rename awareness of case-folding collision check:
(1) colliding file is one renamed from collided file:
this is also case for issue3370.
$ hg init branch_merge_renaming
$ cd branch_merge_renaming
$ echo a > a
$ hg add a
$ echo b > b
$ hg add b
$ hg commit -m '#0'
$ hg tag -l A
$ hg rename a tmp
$ hg rename tmp A
$ hg commit -m '#1'
$ hg tag -l B
$ hg update -q 0
$ touch x
$ hg add x
$ hg commit -m '#2'
created new head
$ hg tag -l C
$ hg merge -q
$ hg status -A
M A
R a
C b
C x
$ hg update -q --clean 1
$ hg merge -q
$ hg status -A
M x
C A
C b
$ hg commit -m '(D)'
$ hg tag -l D
additional test for issue3452:
| this assumes the history below.
|
| (A) -- (C) -- (E) -------
| \ \ \
| \ \ \
| (B) -- (D) -- (F) -- (G)
|
| A: add file 'a'
| B: rename from 'a' to 'A'
| C: add 'x' (or operation other than modification of 'a')
| D: merge C into B
| E: modify 'a'
| F: modify 'A'
| G: merge E into F
|
| issue3452 occurs when (B) is recorded before (C)
$ hg update -q --clean C
$ echo "modify 'a' at (E)" > a
$ echo "modify 'b' at (E)" > b
$ hg commit -m '(E)'
created new head
$ hg tag -l E
$ hg update -q --clean D
$ echo "modify 'A' at (F)" > A
$ hg commit -m '(F)'
$ hg tag -l F
$ hg merge -q --tool internal:other E
$ hg status -A
M A
a
M b
C x
$ cat A
modify 'a' at (E)
test also the case that (B) is recorded after (C), to prevent
regression by changes in the future.
to avoid unexpected (successful) behavior by filelog unification,
target file is not 'a'/'A' but 'b'/'B' in this case.
$ hg update -q --clean A
$ hg rename b tmp
$ hg rename tmp B
$ hg commit -m '(B1)'
created new head
$ hg tag -l B1
$ hg merge -q C
$ hg status -A
M x
C B
C a
$ hg commit -m '(D1)'
$ hg tag -l D1
$ echo "modify 'B' at (F1)" > B
$ hg commit -m '(F1)'
$ hg tag -l F1
$ hg merge -q --tool internal:other E
$ hg status -A
M B
b
M a
C x
$ cat B
modify 'b' at (E)
$ cd ..
(2) colliding file is not related to collided file
$ hg init branch_merge_collding
$ cd branch_merge_collding
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg remove a
$ hg commit -m '#1'
$ echo A > A
$ hg add A
$ hg commit -m '#2'
$ hg update --clean 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo x > x
$ hg add x
$ hg commit -m '#3'
created new head
$ echo 'modified at #4' > a
$ hg commit -m '#4'
$ hg merge
abort: case-folding collision between a and A
[255]
$ hg parents --template '{rev}\n'
4
$ hg status -A
C a
C x
$ cat a
modified at #4
$ hg update --clean 2
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg merge
abort: case-folding collision between a and A
[255]
$ hg parents --template '{rev}\n'
2
$ hg status -A
C A
$ cat A
A
test for deletion awareness of case-folding collision check (issue3648):
revision '#3' doesn't change 'a', so 'a' should be recognized as
safely removed in merging between #2 and #3.
$ hg update --clean 3
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status -A
M A
R a
C x
$ hg update --clean 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 3
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status -A
M x
C A
$ cd ..
Prepare for tests of directory case-folding collisions
$ hg init directory-casing
$ cd directory-casing
$ touch 0 # test: file without directory
$ mkdir 0a
$ touch 0a/f
$ mkdir aA
$ touch aA/a
$ hg ci -Aqm0
Directory/file case-folding collision:
$ hg up -q null
$ touch 00 # test: starts as '0'
$ mkdir 000 # test: starts as '0'
$ touch 000/f
$ touch Aa # test: collision with 'aA/a'
$ hg ci -Aqm1
$ hg merge 0
abort: case-folding collision between Aa and directory of aA/a
[255]
(note: no collision between 0 and 00 or 000/f)
Directory case-folding collision:
$ hg up -qC null
$ hg --config extensions.purge= purge
$ mkdir 0A0
$ touch 0A0/f # test: starts as '0a'
$ mkdir Aa
$ touch Aa/b # test: collision with 'aA/a'
$ hg ci -Aqm2
$ hg merge 0
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cd ..
################################
test for linear updates
################################
test for rename awareness of case-folding collision check:
(1) colliding file is one renamed from collided file
$ hg init linearupdate_renameaware_1
$ cd linearupdate_renameaware_1
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg rename a tmp
$ hg rename tmp A
$ hg commit -m '#1'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo 'this is added line' >> a
$ hg update 1
merging a and A to A
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
$ hg status -A
M A
$ cat A
a
this is added line
$ cd ..
(2) colliding file is not related to collided file
$ hg init linearupdate_renameaware_2
$ cd linearupdate_renameaware_2
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg remove a
$ hg commit -m '#1'
$ echo A > A
$ hg add A
$ hg commit -m '#2'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
0
$ hg status -A
C a
$ cat A
a
$ hg up -qC 2
$ hg update --check 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
0
$ hg status -A
C a
$ cat a
a
$ hg update --clean 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
2
$ hg status -A
C A
$ cat A
A
$ cd ..
(3) colliding file is not related to collided file: added in working dir
$ hg init linearupdate_renameaware_3
$ cd linearupdate_renameaware_3
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg rename a b
$ hg commit -m '#1'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo B > B
$ hg add B
$ hg status
A B
$ hg update
abort: case-folding collision between b and B
[255]
$ hg update --check
abort: uncommitted changes
[255]
$ hg update --clean
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
1
$ hg status -A
C b
$ cat b
a
$ cd ..