revlog: remove legacy usage of `_maxchainlen`
All core code is now getting the setting from the DeltaConfig object.
# revlogdeltas.py - Logic around delta computation for revlog
#
# Copyright 2005-2007 Olivia Mackall <olivia@selenic.com>
# Copyright 2018 Octobus <contact@octobus.net>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""Helper class to compute deltas stored inside revlogs"""
import collections
import struct
# import stuff from node for others to import from revlog
from ..node import nullrev
from ..i18n import _
from .constants import (
COMP_MODE_DEFAULT,
COMP_MODE_INLINE,
COMP_MODE_PLAIN,
DELTA_BASE_REUSE_FORCE,
DELTA_BASE_REUSE_NO,
KIND_CHANGELOG,
KIND_FILELOG,
KIND_MANIFESTLOG,
REVIDX_ISCENSORED,
REVIDX_RAWTEXT_CHANGING_FLAGS,
)
from ..thirdparty import attr
from .. import (
error,
mdiff,
util,
)
from . import flagutil
# maximum <delta-chain-data>/<revision-text-length> ratio
LIMIT_DELTA2TEXT = 2
class _testrevlog:
"""minimalist fake revlog to use in doctests"""
def __init__(self, data, density=0.5, mingap=0, snapshot=()):
"""data is an list of revision payload boundaries"""
from .. import revlog
self._data = data
self._srdensitythreshold = density
self._srmingapsize = mingap
self.data_config = revlog.DataConfig()
self.data_config.sr_density_threshold = density
self.data_config.sr_min_gap_size = mingap
self.delta_config = revlog.DeltaConfig()
self.feature_config = revlog.FeatureConfig()
self._snapshot = set(snapshot)
self.index = None
def start(self, rev):
if rev == nullrev:
return 0
if rev == 0:
return 0
return self._data[rev - 1]
def end(self, rev):
if rev == nullrev:
return 0
return self._data[rev]
def length(self, rev):
return self.end(rev) - self.start(rev)
def __len__(self):
return len(self._data)
def issnapshot(self, rev):
if rev == nullrev:
return True
return rev in self._snapshot
def slicechunk(revlog, revs, targetsize=None):
"""slice revs to reduce the amount of unrelated data to be read from disk.
``revs`` is sliced into groups that should be read in one time.
Assume that revs are sorted.
The initial chunk is sliced until the overall density (payload/chunks-span
ratio) is above `revlog._srdensitythreshold`. No gap smaller than
`revlog._srmingapsize` is skipped.
If `targetsize` is set, no chunk larger than `targetsize` will be yield.
For consistency with other slicing choice, this limit won't go lower than
`revlog._srmingapsize`.
If individual revisions chunk are larger than this limit, they will still
be raised individually.
>>> data = [
... 5, #00 (5)
... 10, #01 (5)
... 12, #02 (2)
... 12, #03 (empty)
... 27, #04 (15)
... 31, #05 (4)
... 31, #06 (empty)
... 42, #07 (11)
... 47, #08 (5)
... 47, #09 (empty)
... 48, #10 (1)
... 51, #11 (3)
... 74, #12 (23)
... 85, #13 (11)
... 86, #14 (1)
... 91, #15 (5)
... ]
>>> revlog = _testrevlog(data, snapshot=range(16))
>>> list(slicechunk(revlog, list(range(16))))
[[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]]
>>> list(slicechunk(revlog, [0, 15]))
[[0], [15]]
>>> list(slicechunk(revlog, [0, 11, 15]))
[[0], [11], [15]]
>>> list(slicechunk(revlog, [0, 11, 13, 15]))
[[0], [11, 13, 15]]
>>> list(slicechunk(revlog, [1, 2, 3, 5, 8, 10, 11, 14]))
[[1, 2], [5, 8, 10, 11], [14]]
Slicing with a maximum chunk size
>>> list(slicechunk(revlog, [0, 11, 13, 15], targetsize=15))
[[0], [11], [13], [15]]
>>> list(slicechunk(revlog, [0, 11, 13, 15], targetsize=20))
[[0], [11], [13, 15]]
Slicing involving nullrev
>>> list(slicechunk(revlog, [-1, 0, 11, 13, 15], targetsize=20))
[[-1, 0], [11], [13, 15]]
>>> list(slicechunk(revlog, [-1, 13, 15], targetsize=5))
[[-1], [13], [15]]
"""
if targetsize is not None:
targetsize = max(targetsize, revlog._srmingapsize)
# targetsize should not be specified when evaluating delta candidates:
# * targetsize is used to ensure we stay within specification when reading,
densityslicing = getattr(revlog.index, 'slicechunktodensity', None)
if densityslicing is None:
densityslicing = lambda x, y, z: _slicechunktodensity(revlog, x, y, z)
for chunk in densityslicing(
revs, revlog._srdensitythreshold, revlog._srmingapsize
):
for subchunk in _slicechunktosize(revlog, chunk, targetsize):
yield subchunk
def _slicechunktosize(revlog, revs, targetsize=None):
"""slice revs to match the target size
This is intended to be used on chunk that density slicing selected by that
are still too large compared to the read garantee of revlog. This might
happens when "minimal gap size" interrupted the slicing or when chain are
built in a way that create large blocks next to each other.
>>> data = [
... 3, #0 (3)
... 5, #1 (2)
... 6, #2 (1)
... 8, #3 (2)
... 8, #4 (empty)
... 11, #5 (3)
... 12, #6 (1)
... 13, #7 (1)
... 14, #8 (1)
... ]
== All snapshots cases ==
>>> revlog = _testrevlog(data, snapshot=range(9))
Cases where chunk is already small enough
>>> list(_slicechunktosize(revlog, [0], 3))
[[0]]
>>> list(_slicechunktosize(revlog, [6, 7], 3))
[[6, 7]]
>>> list(_slicechunktosize(revlog, [0], None))
[[0]]
>>> list(_slicechunktosize(revlog, [6, 7], None))
[[6, 7]]
cases where we need actual slicing
>>> list(_slicechunktosize(revlog, [0, 1], 3))
[[0], [1]]
>>> list(_slicechunktosize(revlog, [1, 3], 3))
[[1], [3]]
>>> list(_slicechunktosize(revlog, [1, 2, 3], 3))
[[1, 2], [3]]
>>> list(_slicechunktosize(revlog, [3, 5], 3))
[[3], [5]]
>>> list(_slicechunktosize(revlog, [3, 4, 5], 3))
[[3], [5]]
>>> list(_slicechunktosize(revlog, [5, 6, 7, 8], 3))
[[5], [6, 7, 8]]
>>> list(_slicechunktosize(revlog, [0, 1, 2, 3, 4, 5, 6, 7, 8], 3))
[[0], [1, 2], [3], [5], [6, 7, 8]]
Case with too large individual chunk (must return valid chunk)
>>> list(_slicechunktosize(revlog, [0, 1], 2))
[[0], [1]]
>>> list(_slicechunktosize(revlog, [1, 3], 1))
[[1], [3]]
>>> list(_slicechunktosize(revlog, [3, 4, 5], 2))
[[3], [5]]
== No Snapshot cases ==
>>> revlog = _testrevlog(data)
Cases where chunk is already small enough
>>> list(_slicechunktosize(revlog, [0], 3))
[[0]]
>>> list(_slicechunktosize(revlog, [6, 7], 3))
[[6, 7]]
>>> list(_slicechunktosize(revlog, [0], None))
[[0]]
>>> list(_slicechunktosize(revlog, [6, 7], None))
[[6, 7]]
cases where we need actual slicing
>>> list(_slicechunktosize(revlog, [0, 1], 3))
[[0], [1]]
>>> list(_slicechunktosize(revlog, [1, 3], 3))
[[1], [3]]
>>> list(_slicechunktosize(revlog, [1, 2, 3], 3))
[[1], [2, 3]]
>>> list(_slicechunktosize(revlog, [3, 5], 3))
[[3], [5]]
>>> list(_slicechunktosize(revlog, [3, 4, 5], 3))
[[3], [4, 5]]
>>> list(_slicechunktosize(revlog, [5, 6, 7, 8], 3))
[[5], [6, 7, 8]]
>>> list(_slicechunktosize(revlog, [0, 1, 2, 3, 4, 5, 6, 7, 8], 3))
[[0], [1, 2], [3], [5], [6, 7, 8]]
Case with too large individual chunk (must return valid chunk)
>>> list(_slicechunktosize(revlog, [0, 1], 2))
[[0], [1]]
>>> list(_slicechunktosize(revlog, [1, 3], 1))
[[1], [3]]
>>> list(_slicechunktosize(revlog, [3, 4, 5], 2))
[[3], [5]]
== mixed case ==
>>> revlog = _testrevlog(data, snapshot=[0, 1, 2])
>>> list(_slicechunktosize(revlog, list(range(9)), 5))
[[0, 1], [2], [3, 4, 5], [6, 7, 8]]
"""
assert targetsize is None or 0 <= targetsize
startdata = revlog.start(revs[0])
enddata = revlog.end(revs[-1])
fullspan = enddata - startdata
if targetsize is None or fullspan <= targetsize:
yield revs
return
startrevidx = 0
endrevidx = 1
iterrevs = enumerate(revs)
next(iterrevs) # skip first rev.
# first step: get snapshots out of the way
for idx, r in iterrevs:
span = revlog.end(r) - startdata
snapshot = revlog.issnapshot(r)
if span <= targetsize and snapshot:
endrevidx = idx + 1
else:
chunk = _trimchunk(revlog, revs, startrevidx, endrevidx)
if chunk:
yield chunk
startrevidx = idx
startdata = revlog.start(r)
endrevidx = idx + 1
if not snapshot:
break
# for the others, we use binary slicing to quickly converge toward valid
# chunks (otherwise, we might end up looking for start/end of many
# revisions). This logic is not looking for the perfect slicing point, it
# focuses on quickly converging toward valid chunks.
nbitem = len(revs)
while (enddata - startdata) > targetsize:
endrevidx = nbitem
if nbitem - startrevidx <= 1:
break # protect against individual chunk larger than limit
localenddata = revlog.end(revs[endrevidx - 1])
span = localenddata - startdata
while span > targetsize:
if endrevidx - startrevidx <= 1:
break # protect against individual chunk larger than limit
endrevidx -= (endrevidx - startrevidx) // 2
localenddata = revlog.end(revs[endrevidx - 1])
span = localenddata - startdata
chunk = _trimchunk(revlog, revs, startrevidx, endrevidx)
if chunk:
yield chunk
startrevidx = endrevidx
startdata = revlog.start(revs[startrevidx])
chunk = _trimchunk(revlog, revs, startrevidx)
if chunk:
yield chunk
def _slicechunktodensity(revlog, revs, targetdensity=0.5, mingapsize=0):
"""slice revs to reduce the amount of unrelated data to be read from disk.
``revs`` is sliced into groups that should be read in one time.
Assume that revs are sorted.
The initial chunk is sliced until the overall density (payload/chunks-span
ratio) is above `targetdensity`. No gap smaller than `mingapsize` is
skipped.
>>> revlog = _testrevlog([
... 5, #00 (5)
... 10, #01 (5)
... 12, #02 (2)
... 12, #03 (empty)
... 27, #04 (15)
... 31, #05 (4)
... 31, #06 (empty)
... 42, #07 (11)
... 47, #08 (5)
... 47, #09 (empty)
... 48, #10 (1)
... 51, #11 (3)
... 74, #12 (23)
... 85, #13 (11)
... 86, #14 (1)
... 91, #15 (5)
... ])
>>> list(_slicechunktodensity(revlog, list(range(16))))
[[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]]
>>> list(_slicechunktodensity(revlog, [0, 15]))
[[0], [15]]
>>> list(_slicechunktodensity(revlog, [0, 11, 15]))
[[0], [11], [15]]
>>> list(_slicechunktodensity(revlog, [0, 11, 13, 15]))
[[0], [11, 13, 15]]
>>> list(_slicechunktodensity(revlog, [1, 2, 3, 5, 8, 10, 11, 14]))
[[1, 2], [5, 8, 10, 11], [14]]
>>> list(_slicechunktodensity(revlog, [1, 2, 3, 5, 8, 10, 11, 14],
... mingapsize=20))
[[1, 2, 3, 5, 8, 10, 11], [14]]
>>> list(_slicechunktodensity(revlog, [1, 2, 3, 5, 8, 10, 11, 14],
... targetdensity=0.95))
[[1, 2], [5], [8, 10, 11], [14]]
>>> list(_slicechunktodensity(revlog, [1, 2, 3, 5, 8, 10, 11, 14],
... targetdensity=0.95, mingapsize=12))
[[1, 2], [5, 8, 10, 11], [14]]
"""
start = revlog.start
length = revlog.length
if len(revs) <= 1:
yield revs
return
deltachainspan = segmentspan(revlog, revs)
if deltachainspan < mingapsize:
yield revs
return
readdata = deltachainspan
chainpayload = sum(length(r) for r in revs)
if deltachainspan:
density = chainpayload / float(deltachainspan)
else:
density = 1.0
if density >= targetdensity:
yield revs
return
# Store the gaps in a heap to have them sorted by decreasing size
gaps = []
prevend = None
for i, rev in enumerate(revs):
revstart = start(rev)
revlen = length(rev)
# Skip empty revisions to form larger holes
if revlen == 0:
continue
if prevend is not None:
gapsize = revstart - prevend
# only consider holes that are large enough
if gapsize > mingapsize:
gaps.append((gapsize, i))
prevend = revstart + revlen
# sort the gaps to pop them from largest to small
gaps.sort()
# Collect the indices of the largest holes until the density is acceptable
selected = []
while gaps and density < targetdensity:
gapsize, gapidx = gaps.pop()
selected.append(gapidx)
# the gap sizes are stored as negatives to be sorted decreasingly
# by the heap
readdata -= gapsize
if readdata > 0:
density = chainpayload / float(readdata)
else:
density = 1.0
selected.sort()
# Cut the revs at collected indices
previdx = 0
for idx in selected:
chunk = _trimchunk(revlog, revs, previdx, idx)
if chunk:
yield chunk
previdx = idx
chunk = _trimchunk(revlog, revs, previdx)
if chunk:
yield chunk
def _trimchunk(revlog, revs, startidx, endidx=None):
"""returns revs[startidx:endidx] without empty trailing revs
Doctest Setup
>>> revlog = _testrevlog([
... 5, #0
... 10, #1
... 12, #2
... 12, #3 (empty)
... 17, #4
... 21, #5
... 21, #6 (empty)
... ])
Contiguous cases:
>>> _trimchunk(revlog, [0, 1, 2, 3, 4, 5, 6], 0)
[0, 1, 2, 3, 4, 5]
>>> _trimchunk(revlog, [0, 1, 2, 3, 4, 5, 6], 0, 5)
[0, 1, 2, 3, 4]
>>> _trimchunk(revlog, [0, 1, 2, 3, 4, 5, 6], 0, 4)
[0, 1, 2]
>>> _trimchunk(revlog, [0, 1, 2, 3, 4, 5, 6], 2, 4)
[2]
>>> _trimchunk(revlog, [0, 1, 2, 3, 4, 5, 6], 3)
[3, 4, 5]
>>> _trimchunk(revlog, [0, 1, 2, 3, 4, 5, 6], 3, 5)
[3, 4]
Discontiguous cases:
>>> _trimchunk(revlog, [1, 3, 5, 6], 0)
[1, 3, 5]
>>> _trimchunk(revlog, [1, 3, 5, 6], 0, 2)
[1]
>>> _trimchunk(revlog, [1, 3, 5, 6], 1, 3)
[3, 5]
>>> _trimchunk(revlog, [1, 3, 5, 6], 1)
[3, 5]
"""
length = revlog.length
if endidx is None:
endidx = len(revs)
# If we have a non-emtpy delta candidate, there are nothing to trim
if revs[endidx - 1] < len(revlog):
# Trim empty revs at the end, except the very first revision of a chain
while (
endidx > 1 and endidx > startidx and length(revs[endidx - 1]) == 0
):
endidx -= 1
return revs[startidx:endidx]
def segmentspan(revlog, revs):
"""Get the byte span of a segment of revisions
revs is a sorted array of revision numbers
>>> revlog = _testrevlog([
... 5, #0
... 10, #1
... 12, #2
... 12, #3 (empty)
... 17, #4
... ])
>>> segmentspan(revlog, [0, 1, 2, 3, 4])
17
>>> segmentspan(revlog, [0, 4])
17
>>> segmentspan(revlog, [3, 4])
5
>>> segmentspan(revlog, [1, 2, 3,])
7
>>> segmentspan(revlog, [1, 3])
7
"""
if not revs:
return 0
end = revlog.end(revs[-1])
return end - revlog.start(revs[0])
def _textfromdelta(revlog, baserev, delta, p1, p2, flags, expectednode):
"""build full text from a (base, delta) pair and other metadata"""
# special case deltas which replace entire base; no need to decode
# base revision. this neatly avoids censored bases, which throw when
# they're decoded.
hlen = struct.calcsize(b">lll")
if delta[:hlen] == mdiff.replacediffheader(
revlog.rawsize(baserev), len(delta) - hlen
):
fulltext = delta[hlen:]
else:
# deltabase is rawtext before changed by flag processors, which is
# equivalent to non-raw text
basetext = revlog.revision(baserev)
fulltext = mdiff.patch(basetext, delta)
try:
validatehash = flagutil.processflagsraw(revlog, fulltext, flags)
if validatehash:
revlog.checkhash(fulltext, expectednode, p1=p1, p2=p2)
if flags & REVIDX_ISCENSORED:
raise error.StorageError(
_(b'node %s is not censored') % expectednode
)
except error.CensoredNodeError:
# must pass the censored index flag to add censored revisions
if not flags & REVIDX_ISCENSORED:
raise
return fulltext
@attr.s(slots=True, frozen=True)
class _deltainfo:
distance = attr.ib()
deltalen = attr.ib()
data = attr.ib()
base = attr.ib()
chainbase = attr.ib()
chainlen = attr.ib()
compresseddeltalen = attr.ib()
snapshotdepth = attr.ib()
def drop_u_compression(delta):
"""turn into a "u" (no-compression) into no-compression without header
This is useful for revlog format that has better compression method.
"""
assert delta.data[0] == b'u', delta.data[0]
return _deltainfo(
delta.distance,
delta.deltalen - 1,
(b'', delta.data[1]),
delta.base,
delta.chainbase,
delta.chainlen,
delta.compresseddeltalen,
delta.snapshotdepth,
)
def is_good_delta_info(revlog, deltainfo, revinfo):
"""Returns True if the given delta is good. Good means that it is within
the disk span, disk size, and chain length bounds that we know to be
performant."""
if deltainfo is None:
return False
# the DELTA_BASE_REUSE_FORCE case should have been taken care of sooner so
# we should never end up asking such question. Adding the assert as a
# safe-guard to detect anything that would be fishy in this regard.
assert (
revinfo.cachedelta is None
or revinfo.cachedelta[2] != DELTA_BASE_REUSE_FORCE
or not revlog.delta_config.general_delta
)
# - 'deltainfo.distance' is the distance from the base revision --
# bounding it limits the amount of I/O we need to do.
# - 'deltainfo.compresseddeltalen' is the sum of the total size of
# deltas we need to apply -- bounding it limits the amount of CPU
# we consume.
textlen = revinfo.textlen
defaultmax = textlen * 4
maxdist = revlog._maxdeltachainspan
if not maxdist:
maxdist = deltainfo.distance # ensure the conditional pass
maxdist = max(maxdist, defaultmax)
# Bad delta from read span:
#
# If the span of data read is larger than the maximum allowed.
#
# In the sparse-revlog case, we rely on the associated "sparse reading"
# to avoid issue related to the span of data. In theory, it would be
# possible to build pathological revlog where delta pattern would lead
# to too many reads. However, they do not happen in practice at all. So
# we skip the span check entirely.
if not revlog._sparserevlog and maxdist < deltainfo.distance:
return False
# Bad delta from new delta size:
#
# If the delta size is larger than the target text, storing the
# delta will be inefficient.
if textlen < deltainfo.deltalen:
return False
# Bad delta from cumulated payload size:
#
# If the sum of delta get larger than K * target text length.
if textlen * LIMIT_DELTA2TEXT < deltainfo.compresseddeltalen:
return False
# Bad delta from chain length:
#
# If the number of delta in the chain gets too high.
if (
revlog.delta_config.max_chain_len
and revlog.delta_config.max_chain_len < deltainfo.chainlen
):
return False
# bad delta from intermediate snapshot size limit
#
# If an intermediate snapshot size is higher than the limit. The
# limit exist to prevent endless chain of intermediate delta to be
# created.
if (
deltainfo.snapshotdepth is not None
and (textlen >> deltainfo.snapshotdepth) < deltainfo.deltalen
):
return False
# bad delta if new intermediate snapshot is larger than the previous
# snapshot
if (
deltainfo.snapshotdepth
and revlog.length(deltainfo.base) < deltainfo.deltalen
):
return False
return True
# If a revision's full text is that much bigger than a base candidate full
# text's, it is very unlikely that it will produce a valid delta. We no longer
# consider these candidates.
LIMIT_BASE2TEXT = 500
def _candidategroups(
revlog,
textlen,
p1,
p2,
cachedelta,
excluded_bases=None,
target_rev=None,
snapshot_cache=None,
):
"""Provides group of revision to be tested as delta base
This top level function focus on emitting groups with unique and worthwhile
content. See _raw_candidate_groups for details about the group order.
"""
# should we try to build a delta?
if not (len(revlog) and revlog._storedeltachains):
yield None
return
if target_rev is None:
target_rev = len(revlog)
if not revlog.delta_config.general_delta:
# before general delta, there is only one possible delta base
yield (target_rev - 1,)
yield None
return
# the DELTA_BASE_REUSE_FORCE case should have been taken care of sooner so
# we should never end up asking such question. Adding the assert as a
# safe-guard to detect anything that would be fishy in this regard.
assert (
cachedelta is None
or cachedelta[2] != DELTA_BASE_REUSE_FORCE
or not revlog.delta_config.general_delta
)
deltalength = revlog.length
deltaparent = revlog.deltaparent
sparse = revlog._sparserevlog
good = None
deltas_limit = textlen * LIMIT_DELTA2TEXT
group_chunk_size = revlog._candidate_group_chunk_size
tested = {nullrev}
candidates = _refinedgroups(
revlog,
p1,
p2,
cachedelta,
snapshot_cache=snapshot_cache,
)
while True:
temptative = candidates.send(good)
if temptative is None:
break
group = []
for rev in temptative:
# skip over empty delta (no need to include them in a chain)
while not (rev == nullrev or rev in tested or deltalength(rev)):
tested.add(rev)
rev = deltaparent(rev)
# no need to try a delta against nullrev, this will be done as a
# last resort.
if rev == nullrev:
continue
# filter out revision we tested already
if rev in tested:
continue
# an higher authority deamed the base unworthy (e.g. censored)
if excluded_bases is not None and rev in excluded_bases:
tested.add(rev)
continue
# We are in some recomputation cases and that rev is too high in
# the revlog
if target_rev is not None and rev >= target_rev:
tested.add(rev)
continue
# filter out delta base that will never produce good delta
if deltas_limit < revlog.length(rev):
tested.add(rev)
continue
if sparse and revlog.rawsize(rev) < (textlen // LIMIT_BASE2TEXT):
tested.add(rev)
continue
# no delta for rawtext-changing revs (see "candelta" for why)
if revlog.flags(rev) & REVIDX_RAWTEXT_CHANGING_FLAGS:
tested.add(rev)
continue
# If we reach here, we are about to build and test a delta.
# The delta building process will compute the chaininfo in all
# case, since that computation is cached, it is fine to access it
# here too.
chainlen, chainsize = revlog._chaininfo(rev)
# if chain will be too long, skip base
if (
revlog.delta_config.max_chain_len
and chainlen >= revlog.delta_config.max_chain_len
):
tested.add(rev)
continue
# if chain already have too much data, skip base
if deltas_limit < chainsize:
tested.add(rev)
continue
if sparse and revlog.upperboundcomp is not None:
maxcomp = revlog.upperboundcomp
basenotsnap = (p1, p2, nullrev)
if rev not in basenotsnap and revlog.issnapshot(rev):
snapshotdepth = revlog.snapshotdepth(rev)
# If text is significantly larger than the base, we can
# expect the resulting delta to be proportional to the size
# difference
revsize = revlog.rawsize(rev)
rawsizedistance = max(textlen - revsize, 0)
# use an estimate of the compression upper bound.
lowestrealisticdeltalen = rawsizedistance // maxcomp
# check the absolute constraint on the delta size
snapshotlimit = textlen >> snapshotdepth
if snapshotlimit < lowestrealisticdeltalen:
# delta lower bound is larger than accepted upper bound
tested.add(rev)
continue
# check the relative constraint on the delta size
revlength = revlog.length(rev)
if revlength < lowestrealisticdeltalen:
# delta probable lower bound is larger than target base
tested.add(rev)
continue
group.append(rev)
if group:
# When the size of the candidate group is big, it can result in a
# quite significant performance impact. To reduce this, we can send
# them in smaller batches until the new batch does not provide any
# improvements.
#
# This might reduce the overall efficiency of the compression in
# some corner cases, but that should also prevent very pathological
# cases from being an issue. (eg. 20 000 candidates).
#
# XXX note that the ordering of the group becomes important as it
# now impacts the final result. The current order is unprocessed
# and can be improved.
if group_chunk_size == 0:
tested.update(group)
good = yield tuple(group)
else:
prev_good = good
for start in range(0, len(group), group_chunk_size):
sub_group = group[start : start + group_chunk_size]
tested.update(sub_group)
good = yield tuple(sub_group)
if prev_good == good:
break
yield None
def _refinedgroups(revlog, p1, p2, cachedelta, snapshot_cache=None):
good = None
# First we try to reuse a the delta contained in the bundle.
# (or from the source revlog)
#
# This logic only applies to general delta repositories and can be disabled
# through configuration. Disabling reuse source delta is useful when
# we want to make sure we recomputed "optimal" deltas.
debug_info = None
if cachedelta is not None and cachedelta[2] > DELTA_BASE_REUSE_NO:
# Assume what we received from the server is a good choice
# build delta will reuse the cache
if debug_info is not None:
debug_info['cached-delta.tested'] += 1
good = yield (cachedelta[0],)
if good is not None:
if debug_info is not None:
debug_info['cached-delta.accepted'] += 1
yield None
return
if snapshot_cache is None:
snapshot_cache = SnapshotCache()
groups = _rawgroups(
revlog,
p1,
p2,
cachedelta,
snapshot_cache,
)
for candidates in groups:
good = yield candidates
if good is not None:
break
# If sparse revlog is enabled, we can try to refine the available deltas
if not revlog._sparserevlog:
yield None
return
# if we have a refinable value, try to refine it
if good is not None and good not in (p1, p2) and revlog.issnapshot(good):
# refine snapshot down
previous = None
while previous != good:
previous = good
base = revlog.deltaparent(good)
if base == nullrev:
break
good = yield (base,)
# refine snapshot up
if not snapshot_cache.snapshots:
snapshot_cache.update(revlog, good + 1)
previous = None
while good != previous:
previous = good
children = tuple(sorted(c for c in snapshot_cache.snapshots[good]))
good = yield children
if debug_info is not None:
if good is None:
debug_info['no-solution'] += 1
yield None
def _rawgroups(revlog, p1, p2, cachedelta, snapshot_cache=None):
"""Provides group of revision to be tested as delta base
This lower level function focus on emitting delta theorically interresting
without looking it any practical details.
The group order aims at providing fast or small candidates first.
"""
# Why search for delta base if we cannot use a delta base ?
assert revlog.delta_config.general_delta
# also see issue6056
sparse = revlog._sparserevlog
curr = len(revlog)
prev = curr - 1
deltachain = lambda rev: revlog._deltachain(rev)[0]
# exclude already lazy tested base if any
parents = [p for p in (p1, p2) if p != nullrev]
if not revlog._deltabothparents and len(parents) == 2:
parents.sort()
# To minimize the chance of having to build a fulltext,
# pick first whichever parent is closest to us (max rev)
yield (parents[1],)
# then the other one (min rev) if the first did not fit
yield (parents[0],)
elif len(parents) > 0:
# Test all parents (1 or 2), and keep the best candidate
yield parents
if sparse and parents:
if snapshot_cache is None:
# map: base-rev: [snapshot-revs]
snapshot_cache = SnapshotCache()
# See if we can use an existing snapshot in the parent chains to use as
# a base for a new intermediate-snapshot
#
# search for snapshot in parents delta chain
# map: snapshot-level: snapshot-rev
parents_snaps = collections.defaultdict(set)
candidate_chains = [deltachain(p) for p in parents]
for chain in candidate_chains:
for idx, s in enumerate(chain):
if not revlog.issnapshot(s):
break
parents_snaps[idx].add(s)
snapfloor = min(parents_snaps[0]) + 1
snapshot_cache.update(revlog, snapfloor)
# search for the highest "unrelated" revision
#
# Adding snapshots used by "unrelated" revision increase the odd we
# reuse an independant, yet better snapshot chain.
#
# XXX instead of building a set of revisions, we could lazily enumerate
# over the chains. That would be more efficient, however we stick to
# simple code for now.
all_revs = set()
for chain in candidate_chains:
all_revs.update(chain)
other = None
for r in revlog.revs(prev, snapfloor):
if r not in all_revs:
other = r
break
if other is not None:
# To avoid unfair competition, we won't use unrelated intermediate
# snapshot that are deeper than the ones from the parent delta
# chain.
max_depth = max(parents_snaps.keys())
chain = deltachain(other)
for depth, s in enumerate(chain):
if s < snapfloor:
continue
if max_depth < depth:
break
if not revlog.issnapshot(s):
break
parents_snaps[depth].add(s)
# Test them as possible intermediate snapshot base
# We test them from highest to lowest level. High level one are more
# likely to result in small delta
floor = None
for idx, snaps in sorted(parents_snaps.items(), reverse=True):
siblings = set()
for s in snaps:
siblings.update(snapshot_cache.snapshots[s])
# Before considering making a new intermediate snapshot, we check
# if an existing snapshot, children of base we consider, would be
# suitable.
#
# It give a change to reuse a delta chain "unrelated" to the
# current revision instead of starting our own. Without such
# re-use, topological branches would keep reopening new chains.
# Creating more and more snapshot as the repository grow.
if floor is not None:
# We only do this for siblings created after the one in our
# parent's delta chain. Those created before has less chances
# to be valid base since our ancestors had to create a new
# snapshot.
siblings = [r for r in siblings if floor < r]
yield tuple(sorted(siblings))
# then test the base from our parent's delta chain.
yield tuple(sorted(snaps))
floor = min(snaps)
# No suitable base found in the parent chain, search if any full
# snapshots emitted since parent's base would be a suitable base for an
# intermediate snapshot.
#
# It give a chance to reuse a delta chain unrelated to the current
# revisions instead of starting our own. Without such re-use,
# topological branches would keep reopening new full chains. Creating
# more and more snapshot as the repository grow.
full = [r for r in snapshot_cache.snapshots[nullrev] if snapfloor <= r]
yield tuple(sorted(full))
if not sparse:
# other approach failed try against prev to hopefully save us a
# fulltext.
yield (prev,)
class SnapshotCache:
__slots__ = ('snapshots', '_start_rev', '_end_rev')
def __init__(self):
self.snapshots = collections.defaultdict(set)
self._start_rev = None
self._end_rev = None
def update(self, revlog, start_rev=0):
"""find snapshots from start_rev to tip"""
nb_revs = len(revlog)
end_rev = nb_revs - 1
if start_rev > end_rev:
return # range is empty
if self._start_rev is None:
assert self._end_rev is None
self._update(revlog, start_rev, end_rev)
elif not (self._start_rev <= start_rev and end_rev <= self._end_rev):
if start_rev < self._start_rev:
self._update(revlog, start_rev, self._start_rev - 1)
if self._end_rev < end_rev:
self._update(revlog, self._end_rev + 1, end_rev)
if self._start_rev is None:
assert self._end_rev is None
self._end_rev = end_rev
self._start_rev = start_rev
else:
self._start_rev = min(self._start_rev, start_rev)
self._end_rev = max(self._end_rev, end_rev)
assert self._start_rev <= self._end_rev, (
self._start_rev,
self._end_rev,
)
def _update(self, revlog, start_rev, end_rev):
"""internal method that actually do update content"""
assert self._start_rev is None or (
start_rev < self._start_rev or start_rev > self._end_rev
), (self._start_rev, self._end_rev, start_rev, end_rev)
assert self._start_rev is None or (
end_rev < self._start_rev or end_rev > self._end_rev
), (self._start_rev, self._end_rev, start_rev, end_rev)
cache = self.snapshots
if hasattr(revlog.index, 'findsnapshots'):
revlog.index.findsnapshots(cache, start_rev, end_rev)
else:
deltaparent = revlog.deltaparent
issnapshot = revlog.issnapshot
for rev in revlog.revs(start_rev, end_rev):
if issnapshot(rev):
cache[deltaparent(rev)].add(rev)
class deltacomputer:
def __init__(
self,
revlog,
write_debug=None,
debug_search=False,
debug_info=None,
):
self.revlog = revlog
self._write_debug = write_debug
if write_debug is None:
self._debug_search = False
else:
self._debug_search = debug_search
self._debug_info = debug_info
self._snapshot_cache = SnapshotCache()
@property
def _gather_debug(self):
return self._write_debug is not None or self._debug_info is not None
def buildtext(self, revinfo):
"""Builds a fulltext version of a revision
revinfo: revisioninfo instance that contains all needed info
"""
btext = revinfo.btext
if btext[0] is not None:
return btext[0]
revlog = self.revlog
cachedelta = revinfo.cachedelta
baserev = cachedelta[0]
delta = cachedelta[1]
fulltext = btext[0] = _textfromdelta(
revlog,
baserev,
delta,
revinfo.p1,
revinfo.p2,
revinfo.flags,
revinfo.node,
)
return fulltext
def _builddeltadiff(self, base, revinfo):
revlog = self.revlog
t = self.buildtext(revinfo)
if revlog.iscensored(base):
# deltas based on a censored revision must replace the
# full content in one patch, so delta works everywhere
header = mdiff.replacediffheader(revlog.rawsize(base), len(t))
delta = header + t
else:
ptext = revlog.rawdata(base)
delta = mdiff.textdiff(ptext, t)
return delta
def _builddeltainfo(self, revinfo, base, target_rev=None):
# can we use the cached delta?
revlog = self.revlog
chainbase = revlog.chainbase(base)
if revlog.delta_config.general_delta:
deltabase = base
else:
if target_rev is not None and base != target_rev - 1:
msg = (
b'general delta cannot use delta for something else '
b'than `prev`: %d<-%d'
)
msg %= (base, target_rev)
raise error.ProgrammingError(msg)
deltabase = chainbase
snapshotdepth = None
if revlog._sparserevlog and deltabase == nullrev:
snapshotdepth = 0
elif revlog._sparserevlog and revlog.issnapshot(deltabase):
# A delta chain should always be one full snapshot,
# zero or more semi-snapshots, and zero or more deltas
p1, p2 = revlog.rev(revinfo.p1), revlog.rev(revinfo.p2)
if deltabase not in (p1, p2) and revlog.issnapshot(deltabase):
snapshotdepth = len(revlog._deltachain(deltabase)[0])
delta = None
if revinfo.cachedelta:
cachebase = revinfo.cachedelta[0]
# check if the diff still apply
currentbase = cachebase
while (
currentbase != nullrev
and currentbase != base
and self.revlog.length(currentbase) == 0
):
currentbase = self.revlog.deltaparent(currentbase)
if self.revlog._lazydelta and currentbase == base:
delta = revinfo.cachedelta[1]
if delta is None:
delta = self._builddeltadiff(base, revinfo)
if self._debug_search:
msg = b"DBG-DELTAS-SEARCH: uncompressed-delta-size=%d\n"
msg %= len(delta)
self._write_debug(msg)
# snapshotdept need to be neither None nor 0 level snapshot
if revlog.upperboundcomp is not None and snapshotdepth:
lowestrealisticdeltalen = len(delta) // revlog.upperboundcomp
snapshotlimit = revinfo.textlen >> snapshotdepth
if self._debug_search:
msg = b"DBG-DELTAS-SEARCH: projected-lower-size=%d\n"
msg %= lowestrealisticdeltalen
self._write_debug(msg)
if snapshotlimit < lowestrealisticdeltalen:
if self._debug_search:
msg = b"DBG-DELTAS-SEARCH: DISCARDED (snapshot limit)\n"
self._write_debug(msg)
return None
if revlog.length(base) < lowestrealisticdeltalen:
if self._debug_search:
msg = b"DBG-DELTAS-SEARCH: DISCARDED (prev size)\n"
self._write_debug(msg)
return None
header, data = revlog.compress(delta)
deltalen = len(header) + len(data)
offset = revlog.end(len(revlog) - 1)
dist = deltalen + offset - revlog.start(chainbase)
chainlen, compresseddeltalen = revlog._chaininfo(base)
chainlen += 1
compresseddeltalen += deltalen
return _deltainfo(
dist,
deltalen,
(header, data),
deltabase,
chainbase,
chainlen,
compresseddeltalen,
snapshotdepth,
)
def _fullsnapshotinfo(self, revinfo, curr):
rawtext = self.buildtext(revinfo)
data = self.revlog.compress(rawtext)
compresseddeltalen = deltalen = dist = len(data[1]) + len(data[0])
deltabase = chainbase = curr
snapshotdepth = 0
chainlen = 1
return _deltainfo(
dist,
deltalen,
data,
deltabase,
chainbase,
chainlen,
compresseddeltalen,
snapshotdepth,
)
def finddeltainfo(self, revinfo, excluded_bases=None, target_rev=None):
"""Find an acceptable delta against a candidate revision
revinfo: information about the revision (instance of _revisioninfo)
Returns the first acceptable candidate revision, as ordered by
_candidategroups
If no suitable deltabase is found, we return delta info for a full
snapshot.
`excluded_bases` is an optional set of revision that cannot be used as
a delta base. Use this to recompute delta suitable in censor or strip
context.
"""
if target_rev is None:
target_rev = len(self.revlog)
gather_debug = self._gather_debug
cachedelta = revinfo.cachedelta
revlog = self.revlog
p1r = p2r = None
if excluded_bases is None:
excluded_bases = set()
if gather_debug:
start = util.timer()
dbg = self._one_dbg_data()
dbg['revision'] = target_rev
target_revlog = b"UNKNOWN"
target_type = self.revlog.target[0]
target_key = self.revlog.target[1]
if target_type == KIND_CHANGELOG:
target_revlog = b'CHANGELOG:'
elif target_type == KIND_MANIFESTLOG:
target_revlog = b'MANIFESTLOG:'
if target_key:
target_revlog += b'%s:' % target_key
elif target_type == KIND_FILELOG:
target_revlog = b'FILELOG:'
if target_key:
target_revlog += b'%s:' % target_key
dbg['target-revlog'] = target_revlog
p1r = revlog.rev(revinfo.p1)
p2r = revlog.rev(revinfo.p2)
if p1r != nullrev:
p1_chain_len = revlog._chaininfo(p1r)[0]
else:
p1_chain_len = -1
if p2r != nullrev:
p2_chain_len = revlog._chaininfo(p2r)[0]
else:
p2_chain_len = -1
dbg['p1-chain-len'] = p1_chain_len
dbg['p2-chain-len'] = p2_chain_len
# 1) if the revision is empty, no amount of delta can beat it
#
# 2) no delta for flag processor revision (see "candelta" for why)
# not calling candelta since only one revision needs test, also to
# avoid overhead fetching flags again.
if not revinfo.textlen or revinfo.flags & REVIDX_RAWTEXT_CHANGING_FLAGS:
deltainfo = self._fullsnapshotinfo(revinfo, target_rev)
if gather_debug:
end = util.timer()
dbg['duration'] = end - start
dbg[
'delta-base'
] = deltainfo.base # pytype: disable=attribute-error
dbg['search_round_count'] = 0
dbg['using-cached-base'] = False
dbg['delta_try_count'] = 0
dbg['type'] = b"full"
dbg['snapshot-depth'] = 0
self._dbg_process_data(dbg)
return deltainfo
deltainfo = None
# If this source delta are to be forcibly reuse, let us comply early.
if (
revlog.delta_config.general_delta
and revinfo.cachedelta is not None
and revinfo.cachedelta[2] == DELTA_BASE_REUSE_FORCE
):
base = revinfo.cachedelta[0]
if base == nullrev:
dbg_type = b"full"
deltainfo = self._fullsnapshotinfo(revinfo, target_rev)
if gather_debug:
snapshotdepth = 0
elif base not in excluded_bases:
delta = revinfo.cachedelta[1]
header, data = revlog.compress(delta)
deltalen = len(header) + len(data)
if gather_debug:
offset = revlog.end(len(revlog) - 1)
chainbase = revlog.chainbase(base)
distance = deltalen + offset - revlog.start(chainbase)
chainlen, compresseddeltalen = revlog._chaininfo(base)
chainlen += 1
compresseddeltalen += deltalen
if base == p1r or base == p2r:
dbg_type = b"delta"
snapshotdepth = None
elif not revlog.issnapshot(base):
snapshotdepth = None
else:
dbg_type = b"snapshot"
snapshotdepth = revlog.snapshotdepth(base) + 1
else:
distance = None
chainbase = None
chainlen = None
compresseddeltalen = None
snapshotdepth = None
deltainfo = _deltainfo(
distance=distance,
deltalen=deltalen,
data=(header, data),
base=base,
chainbase=chainbase,
chainlen=chainlen,
compresseddeltalen=compresseddeltalen,
snapshotdepth=snapshotdepth,
)
if deltainfo is not None:
if gather_debug:
end = util.timer()
dbg['duration'] = end - start
dbg[
'delta-base'
] = deltainfo.base # pytype: disable=attribute-error
dbg['search_round_count'] = 0
dbg['using-cached-base'] = True
dbg['delta_try_count'] = 0
dbg['type'] = b"full"
if snapshotdepth is None:
dbg['snapshot-depth'] = 0
else:
dbg['snapshot-depth'] = snapshotdepth
self._dbg_process_data(dbg)
return deltainfo
# count the number of different delta we tried (for debug purpose)
dbg_try_count = 0
# count the number of "search round" we did. (for debug purpose)
dbg_try_rounds = 0
dbg_type = b'unknown'
if p1r is None:
p1r = revlog.rev(revinfo.p1)
p2r = revlog.rev(revinfo.p2)
if self._debug_search:
msg = b"DBG-DELTAS-SEARCH: SEARCH rev=%d\n"
msg %= target_rev
self._write_debug(msg)
groups = _candidategroups(
self.revlog,
revinfo.textlen,
p1r,
p2r,
cachedelta,
excluded_bases,
target_rev,
snapshot_cache=self._snapshot_cache,
)
candidaterevs = next(groups)
while candidaterevs is not None:
dbg_try_rounds += 1
if self._debug_search:
prev = None
if deltainfo is not None:
prev = deltainfo.base
if (
cachedelta is not None
and len(candidaterevs) == 1
and cachedelta[0] in candidaterevs
):
round_type = b"cached-delta"
elif p1r in candidaterevs or p2r in candidaterevs:
round_type = b"parents"
elif prev is not None and all(c < prev for c in candidaterevs):
round_type = b"refine-down"
elif prev is not None and all(c > prev for c in candidaterevs):
round_type = b"refine-up"
else:
round_type = b"search-down"
msg = b"DBG-DELTAS-SEARCH: ROUND #%d - %d candidates - %s\n"
msg %= (dbg_try_rounds, len(candidaterevs), round_type)
self._write_debug(msg)
nominateddeltas = []
if deltainfo is not None:
if self._debug_search:
msg = (
b"DBG-DELTAS-SEARCH: CONTENDER: rev=%d - length=%d\n"
)
msg %= (deltainfo.base, deltainfo.deltalen)
self._write_debug(msg)
# if we already found a good delta,
# challenge it against refined candidates
nominateddeltas.append(deltainfo)
for candidaterev in candidaterevs:
if self._debug_search:
msg = b"DBG-DELTAS-SEARCH: CANDIDATE: rev=%d\n"
msg %= candidaterev
self._write_debug(msg)
candidate_type = None
if candidaterev == p1r:
candidate_type = b"p1"
elif candidaterev == p2r:
candidate_type = b"p2"
elif self.revlog.issnapshot(candidaterev):
candidate_type = b"snapshot-%d"
candidate_type %= self.revlog.snapshotdepth(
candidaterev
)
if candidate_type is not None:
msg = b"DBG-DELTAS-SEARCH: type=%s\n"
msg %= candidate_type
self._write_debug(msg)
msg = b"DBG-DELTAS-SEARCH: size=%d\n"
msg %= self.revlog.length(candidaterev)
self._write_debug(msg)
msg = b"DBG-DELTAS-SEARCH: base=%d\n"
msg %= self.revlog.deltaparent(candidaterev)
self._write_debug(msg)
dbg_try_count += 1
if self._debug_search:
delta_start = util.timer()
candidatedelta = self._builddeltainfo(
revinfo,
candidaterev,
target_rev=target_rev,
)
if self._debug_search:
delta_end = util.timer()
msg = b"DBG-DELTAS-SEARCH: delta-search-time=%f\n"
msg %= delta_end - delta_start
self._write_debug(msg)
if candidatedelta is not None:
if is_good_delta_info(self.revlog, candidatedelta, revinfo):
if self._debug_search:
msg = b"DBG-DELTAS-SEARCH: DELTA: length=%d (GOOD)\n"
msg %= candidatedelta.deltalen
self._write_debug(msg)
nominateddeltas.append(candidatedelta)
elif self._debug_search:
msg = b"DBG-DELTAS-SEARCH: DELTA: length=%d (BAD)\n"
msg %= candidatedelta.deltalen
self._write_debug(msg)
elif self._debug_search:
msg = b"DBG-DELTAS-SEARCH: NO-DELTA\n"
self._write_debug(msg)
if nominateddeltas:
deltainfo = min(nominateddeltas, key=lambda x: x.deltalen)
if deltainfo is not None:
candidaterevs = groups.send(deltainfo.base)
else:
candidaterevs = next(groups)
if deltainfo is None:
dbg_type = b"full"
deltainfo = self._fullsnapshotinfo(revinfo, target_rev)
elif deltainfo.snapshotdepth: # pytype: disable=attribute-error
dbg_type = b"snapshot"
else:
dbg_type = b"delta"
if gather_debug:
end = util.timer()
if dbg_type == b'full':
used_cached = (
cachedelta is not None
and dbg_try_rounds == 0
and dbg_try_count == 0
and cachedelta[0] == nullrev
)
else:
used_cached = (
cachedelta is not None
and dbg_try_rounds == 1
and dbg_try_count == 1
and deltainfo.base == cachedelta[0]
)
dbg['duration'] = end - start
dbg[
'delta-base'
] = deltainfo.base # pytype: disable=attribute-error
dbg['search_round_count'] = dbg_try_rounds
dbg['using-cached-base'] = used_cached
dbg['delta_try_count'] = dbg_try_count
dbg['type'] = dbg_type
if (
deltainfo.snapshotdepth # pytype: disable=attribute-error
is not None
):
dbg[
'snapshot-depth'
] = deltainfo.snapshotdepth # pytype: disable=attribute-error
else:
dbg['snapshot-depth'] = 0
self._dbg_process_data(dbg)
return deltainfo
def _one_dbg_data(self):
return {
'duration': None,
'revision': None,
'delta-base': None,
'search_round_count': None,
'using-cached-base': None,
'delta_try_count': None,
'type': None,
'p1-chain-len': None,
'p2-chain-len': None,
'snapshot-depth': None,
'target-revlog': None,
}
def _dbg_process_data(self, dbg):
if self._debug_info is not None:
self._debug_info.append(dbg)
if self._write_debug is not None:
msg = (
b"DBG-DELTAS:"
b" %-12s"
b" rev=%d:"
b" delta-base=%d"
b" is-cached=%d"
b" - search-rounds=%d"
b" try-count=%d"
b" - delta-type=%-6s"
b" snap-depth=%d"
b" - p1-chain-length=%d"
b" p2-chain-length=%d"
b" - duration=%f"
b"\n"
)
msg %= (
dbg["target-revlog"],
dbg["revision"],
dbg["delta-base"],
dbg["using-cached-base"],
dbg["search_round_count"],
dbg["delta_try_count"],
dbg["type"],
dbg["snapshot-depth"],
dbg["p1-chain-len"],
dbg["p2-chain-len"],
dbg["duration"],
)
self._write_debug(msg)
def delta_compression(default_compression_header, deltainfo):
"""return (COMPRESSION_MODE, deltainfo)
used by revlog v2+ format to dispatch between PLAIN and DEFAULT
compression.
"""
h, d = deltainfo.data
compression_mode = COMP_MODE_INLINE
if not h and not d:
# not data to store at all... declare them uncompressed
compression_mode = COMP_MODE_PLAIN
elif not h:
t = d[0:1]
if t == b'\0':
compression_mode = COMP_MODE_PLAIN
elif t == default_compression_header:
compression_mode = COMP_MODE_DEFAULT
elif h == b'u':
# we have a more efficient way to declare uncompressed
h = b''
compression_mode = COMP_MODE_PLAIN
deltainfo = drop_u_compression(deltainfo)
return compression_mode, deltainfo