bundle: add config option to include phases
This adds an experimental.bundle-phases config option to include phase
information in bundles. As with the recently added support for
bundling obsmarkers, the support for bundling phases is hidden behind
the config option until we decide to make a bundlespec v3 that
includes phases (and obsmarkers and ...).
We could perhaps use the listkeys format for this, but that's
considered obsolete according to Pierre-Yves. Instead, we introduce a
new "phase-heads" bundle part. The new part contains the phase heads
among the set of bundled revisions. It does not include those in
secret phase; any head in the bundle that is not mentioned in the
phase-heads part is assumed to be secret. As a special case, an empty
phase-heads part thus means that any changesets should be added in
secret phase. (If we ever add a fourth phase, we'll include secret in
the part and we'll add a version number.)
For now, phases are only included by "hg bundle", and not by
e.g. strip and rebase.
============================================
Testing obsolescence markers push: Cases B.4
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category B: pruning case
TestCase 4: Pruned changeset on common part of the history
Variants:
# a: explicite push
# b: bare push
B.4 Pruned changeset on common part of history
=============================================
.. {{{
.. ⊗ C
.. | ● B
.. | |
.. | ● A
.. |/
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * C (prune)
..
.. Command run:
..
.. * hg push -r B
.. * hg push
..
.. Expected exchange:
..
.. * prune for C
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos B.4
creating test repo for test case B.4
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ mkcommit B
$ hg phase --public .
$ hg push ../pushdest
pushing to ../pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
$ hg push ../pulldest
pushing to ../pulldest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
$ hg update -q 0
$ mkcommit C
created new head
$ hg prune -qd '0 0' .
$ hg log -G --hidden
x 7f7f229b13a6 (draft): C
|
| o f6fbb35d8ac9 (public): B
| |
| o f5bc6836db60 (public): A
|/
@ a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
$ cp -R B.4 B.4.a
$ cp -R B.4 B.4.b
Actual Test (explicit push version)
-----------------------------------
$ dotest B.4.a O
## Running testcase B.4.a
# testing echange of "O" (a9bdc8b26820)
## initial state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "O" from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "a9bdc8b26820" from main into pulldest
pulling from main
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Actual Test (bare push version)
-----------------------------------
$ dotest B.4.b
## Running testcase B.4.b
## initial state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}