rhg: desambiguate status without decompressing filelog if possible
When status is unsure based on `stat()` and the dirstate if a file is clean
or modified, we need to compare it against the filelog.
This comparison can skip looking at contents if the lengths differ.
This changeset optimize this further to deduce what we can about the length
if the filelog without decompressing it or resolving deltas.
Differential Revision: https://phab.mercurial-scm.org/D11965
#testcases filelog compatibility changeset sidedata
$ cat >> $HGRCPATH << EOF
> [extensions]
> rebase=
> [alias]
> l = log -G -T '{rev} {desc}\n{files}\n'
> EOF
#if compatibility
$ cat >> $HGRCPATH << EOF
> [experimental]
> copies.read-from = compatibility
> EOF
#endif
#if changeset
$ cat >> $HGRCPATH << EOF
> [experimental]
> copies.read-from = changeset-only
> copies.write-to = changeset-only
> EOF
#endif
#if sidedata
$ cat >> $HGRCPATH << EOF
> [format]
> exp-use-copies-side-data-changeset = yes
> EOF
#endif
$ REPONUM=0
$ newrepo() {
> cd $TESTTMP
> REPONUM=`expr $REPONUM + 1`
> hg init repo-$REPONUM
> cd repo-$REPONUM
> }
Simple rename case
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg mv x y
$ hg debugp1copies
x -> y
$ hg debugp2copies
$ hg ci -m 'rename x to y'
$ hg l
@ 1 rename x to y
| x y
o 0 add x
x
$ hg debugp1copies -r 1
x -> y
$ hg debugpathcopies 0 1
x -> y
$ hg debugpathcopies 1 0
y -> x
Test filtering copies by path. We do filtering by destination.
$ hg debugpathcopies 0 1 x
$ hg debugpathcopies 1 0 x
y -> x
$ hg debugpathcopies 0 1 y
x -> y
$ hg debugpathcopies 1 0 y
Copies not including commit changes
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg mv x y
$ hg debugpathcopies . .
$ hg debugpathcopies . 'wdir()'
x -> y
$ hg debugpathcopies 'wdir()' .
y -> x
Copy a file onto another file
$ newrepo
$ echo x > x
$ echo y > y
$ hg ci -Aqm 'add x and y'
$ hg cp -f x y
$ hg debugp1copies
x -> y
$ hg debugp2copies
$ hg ci -m 'copy x onto y'
$ hg l
@ 1 copy x onto y
| y
o 0 add x and y
x y
$ hg debugp1copies -r 1
x -> y
$ hg debugpathcopies 0 1
x -> y (no-filelog !)
$ hg debugpathcopies 0 1 --config devel.copy-tracing.trace-all-files=yes
x -> y
Copy a file onto another file with same content. If metadata is stored in changeset, this does not
produce a new filelog entry. The changeset's "files" entry should still list the file.
$ newrepo
$ echo x > x
$ echo x > x2
$ hg ci -Aqm 'add x and x2 with same content'
$ hg cp -f x x2
$ hg ci -m 'copy x onto x2'
$ hg l
@ 1 copy x onto x2
| x2
o 0 add x and x2 with same content
x x2
$ hg debugp1copies -r 1
x -> x2
$ hg debugpathcopies 0 1
x -> x2 (no-filelog !)
$ hg debugpathcopies 0 1 --config devel.copy-tracing.trace-all-files=yes
x -> x2
Rename file in a loop: x->y->z->x
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg mv x y
$ hg debugp1copies
x -> y
$ hg debugp2copies
$ hg ci -m 'rename x to y'
$ hg mv y z
$ hg ci -m 'rename y to z'
$ hg mv z x
$ hg ci -m 'rename z to x'
$ hg l
@ 3 rename z to x
| x z
o 2 rename y to z
| y z
o 1 rename x to y
| x y
o 0 add x
x
$ hg debugpathcopies 0 3
Copy x to z, then remove z, then copy x2 (same content as x) to z. With copy metadata in the
changeset, the two copies here will have the same filelog entry, so ctx['z'].introrev() might point
to the first commit that added the file. We should still report the copy as being from x2.
$ newrepo
$ echo x > x
$ echo x > x2
$ hg ci -Aqm 'add x and x2 with same content'
$ hg cp x z
$ hg ci -qm 'copy x to z'
$ hg rm z
$ hg ci -m 'remove z'
$ hg cp x2 z
$ hg ci -m 'copy x2 to z'
$ hg l
@ 3 copy x2 to z
| z
o 2 remove z
| z
o 1 copy x to z
| z
o 0 add x and x2 with same content
x x2
$ hg debugp1copies -r 3
x2 -> z
$ hg debugpathcopies 0 3
x2 -> z
Create x and y, then rename them both to the same name, but on different sides of a fork
$ newrepo
$ echo x > x
$ echo y > y
$ hg ci -Aqm 'add x and y'
$ hg mv x z
$ hg ci -qm 'rename x to z'
$ hg co -q 0
$ hg mv y z
$ hg ci -qm 'rename y to z'
$ hg l
@ 2 rename y to z
| y z
| o 1 rename x to z
|/ x z
o 0 add x and y
x y
$ hg debugpathcopies 1 2
z -> x
y -> z
Fork renames x to y on one side and removes x on the other
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg mv x y
$ hg ci -m 'rename x to y'
$ hg co -q 0
$ hg rm x
$ hg ci -m 'remove x'
created new head
$ hg l
@ 2 remove x
| x
| o 1 rename x to y
|/ x y
o 0 add x
x
$ hg debugpathcopies 1 2
Merge rename from other branch
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg mv x y
$ hg ci -m 'rename x to y'
$ hg co -q 0
$ echo z > z
$ hg ci -Aqm 'add z'
$ hg merge -q 1
$ hg debugp1copies
$ hg debugp2copies
$ hg ci -m 'merge rename from p2'
$ hg l
@ 3 merge rename from p2
|\
| o 2 add z
| | z
o | 1 rename x to y
|/ x y
o 0 add x
x
Perhaps we should indicate the rename here, but `hg status` is documented to be weird during
merges, so...
$ hg debugp1copies -r 3
$ hg debugp2copies -r 3
$ hg debugpathcopies 0 3
x -> y
$ hg debugpathcopies 1 2
y -> x
$ hg debugpathcopies 1 3
$ hg debugpathcopies 2 3
x -> y
Copy file from either side in a merge
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg co -q null
$ echo y > y
$ hg ci -Aqm 'add y'
$ hg merge -q 0
$ hg cp y z
$ hg debugp1copies
y -> z
$ hg debugp2copies
$ hg ci -m 'copy file from p1 in merge'
$ hg co -q 1
$ hg merge -q 0
$ hg cp x z
$ hg debugp1copies
$ hg debugp2copies
x -> z
$ hg ci -qm 'copy file from p2 in merge'
$ hg l
@ 3 copy file from p2 in merge
|\ z
+---o 2 copy file from p1 in merge
| |/ z
| o 1 add y
| y
o 0 add x
x
$ hg debugp1copies -r 2
y -> z
$ hg debugp2copies -r 2
$ hg debugpathcopies 1 2
y -> z
$ hg debugpathcopies 0 2
$ hg debugp1copies -r 3
$ hg debugp2copies -r 3
x -> z
$ hg debugpathcopies 1 3
$ hg debugpathcopies 0 3
x -> z
Copy file that exists on both sides of the merge, same content on both sides
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x on branch 1'
$ hg co -q null
$ echo x > x
$ hg ci -Aqm 'add x on branch 2'
$ hg merge -q 0
$ hg cp x z
$ hg debugp1copies
x -> z
$ hg debugp2copies
$ hg ci -qm 'merge'
$ hg l
@ 2 merge
|\ z
| o 1 add x on branch 2
| x
o 0 add x on branch 1
x
$ hg debugp1copies -r 2
x -> z
$ hg debugp2copies -r 2
It's a little weird that it shows up on both sides
$ hg debugpathcopies 1 2
x -> z
$ hg debugpathcopies 0 2
x -> z (filelog !)
Copy file that exists on both sides of the merge, different content
$ newrepo
$ echo branch1 > x
$ hg ci -Aqm 'add x on branch 1'
$ hg co -q null
$ echo branch2 > x
$ hg ci -Aqm 'add x on branch 2'
$ hg merge -q 0
warning: conflicts while merging x! (edit, then use 'hg resolve --mark')
[1]
$ echo resolved > x
$ hg resolve -m x
(no more unresolved files)
$ hg cp x z
$ hg debugp1copies
x -> z
$ hg debugp2copies
$ hg ci -qm 'merge'
$ hg l
@ 2 merge
|\ x z
| o 1 add x on branch 2
| x
o 0 add x on branch 1
x
$ hg debugp1copies -r 2
x -> z (changeset !)
x -> z (sidedata !)
$ hg debugp2copies -r 2
x -> z (no-changeset no-sidedata !)
$ hg debugpathcopies 1 2
x -> z (changeset !)
x -> z (sidedata !)
$ hg debugpathcopies 0 2
x -> z (no-changeset no-sidedata !)
Copy x->y on one side of merge and copy x->z on the other side. Pathcopies from one parent
of the merge to the merge should include the copy from the other side.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg cp x y
$ hg ci -qm 'copy x to y'
$ hg co -q 0
$ hg cp x z
$ hg ci -qm 'copy x to z'
$ hg merge -q 1
$ hg ci -m 'merge copy x->y and copy x->z'
$ hg l
@ 3 merge copy x->y and copy x->z
|\
| o 2 copy x to z
| | z
o | 1 copy x to y
|/ y
o 0 add x
x
$ hg debugp1copies -r 3
$ hg debugp2copies -r 3
$ hg debugpathcopies 2 3
x -> y
$ hg debugpathcopies 1 3
x -> z
Copy x->y on two separate branches. Pathcopies from one branch to the other
should not report the copy.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg cp x y
$ hg ci -qm 'copy x to y'
$ hg co -q 0
$ hg graft 1 -q
$ hg l
@ 2 copy x to y
| y
| o 1 copy x to y
|/ y
o 0 add x
x
$ hg debugp1copies -r 1
x -> y
$ hg debugp1copies -r 2
x -> y
$ hg debugpathcopies 1 2
$ hg debugpathcopies 2 1
Copy x to y on one side of merge, create y and rename to z on the other side.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg cp x y
$ hg ci -qm 'copy x to y'
$ hg co -q 0
$ echo y > y
$ hg ci -Aqm 'add y'
$ hg mv y z
$ hg ci -m 'rename y to z'
$ hg merge -q 1
$ hg ci -m 'merge'
$ hg l
@ 4 merge
|\
| o 3 rename y to z
| | y z
| o 2 add y
| | y
o | 1 copy x to y
|/ y
o 0 add x
x
$ hg debugp1copies -r 3
y -> z
$ hg debugp2copies -r 3
$ hg debugpathcopies 2 3
y -> z
$ hg debugpathcopies 1 3
y -> z (no-filelog !)
Create x and y, then rename x to z on one side of merge, and rename y to z and
modify z on the other side. When storing copies in the changeset, we don't
filter out copies whose target was created on the other side of the merge.
$ newrepo
$ echo x > x
$ echo y > y
$ hg ci -Aqm 'add x and y'
$ hg mv x z
$ hg ci -qm 'rename x to z'
$ hg co -q 0
$ hg mv y z
$ hg ci -qm 'rename y to z'
$ echo z >> z
$ hg ci -m 'modify z'
$ hg merge -q 1
warning: conflicts while merging z! (edit, then use 'hg resolve --mark')
[1]
$ echo z > z
$ hg resolve -qm z
$ hg ci -m 'merge 1 into 3'
Try merging the other direction too
$ hg co -q 1
$ hg merge -q 3
warning: conflicts while merging z! (edit, then use 'hg resolve --mark')
[1]
$ echo z > z
$ hg resolve -qm z
$ hg ci -m 'merge 3 into 1'
created new head
$ hg l
@ 5 merge 3 into 1
|\ z
+---o 4 merge 1 into 3
| |/ z
| o 3 modify z
| | z
| o 2 rename y to z
| | y z
o | 1 rename x to z
|/ x z
o 0 add x and y
x y
$ hg debugpathcopies 1 4
y -> z (no-filelog !)
$ hg debugpathcopies 2 4
x -> z (no-filelog !)
$ hg debugpathcopies 0 4
x -> z (filelog !)
y -> z (no-filelog !)
$ hg debugpathcopies 1 5
y -> z (no-filelog !)
$ hg debugpathcopies 2 5
x -> z (no-filelog !)
$ hg debugpathcopies 0 5
x -> z
Create x and y, then remove y and rename x to y on one side of merge, and
modify x on the other side. The modification to x from the second side
should be propagated to y.
$ newrepo
$ echo original > x
$ hg add x
$ echo unrelated > y
$ hg add y
$ hg commit -m 'add x and y'
$ hg remove y
$ hg commit -m 'remove y'
$ hg rename x y
$ hg commit -m 'rename x to y'
$ hg checkout -q 0
$ echo modified > x
$ hg commit -m 'modify x'
created new head
$ hg l
@ 3 modify x
| x
| o 2 rename x to y
| | x y
| o 1 remove y
|/ y
o 0 add x and y
x y
#if filelog
$ hg merge 2
file 'x' was deleted in other [merge rev] but was modified in local [working copy].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
1 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
This should ideally be "modified", but we will probably not be able to fix
that in the filelog case.
$ cat y
original
#else
$ hg merge 2
merging x and y to y
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat y
modified
#endif
Same as above, but in the opposite direction
#if filelog
$ hg co -qC 2
$ hg merge 3
file 'x' was deleted in local [working copy] but was modified in other [merge rev].
You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
What do you want to do? u
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
BROKEN: should be "modified"
$ cat y
original
#else
$ hg co -qC 2
$ hg merge 3
merging y and x to y
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat y
modified
#endif
Create x and y, then rename x to z on one side of merge, and rename y to z and
then delete z on the other side.
$ newrepo
$ echo x > x
$ echo y > y
$ hg ci -Aqm 'add x and y'
$ hg mv x z
$ hg ci -qm 'rename x to z'
$ hg co -q 0
$ hg mv y z
$ hg ci -qm 'rename y to z'
$ hg rm z
$ hg ci -m 'delete z'
$ hg merge -q 1
$ echo z > z
$ hg ci -m 'merge 1 into 3'
Try merging the other direction too
$ hg co -q 1
$ hg merge -q 3
$ echo z > z
$ hg ci -m 'merge 3 into 1'
created new head
$ hg l
@ 5 merge 3 into 1
|\ z
+---o 4 merge 1 into 3
| |/ z
| o 3 delete z
| | z
| o 2 rename y to z
| | y z
o | 1 rename x to z
|/ x z
o 0 add x and y
x y
$ hg debugpathcopies 1 4
$ hg debugpathcopies 2 4
x -> z (no-filelog !)
$ hg debugpathcopies 0 4
x -> z (no-changeset no-compatibility !)
$ hg debugpathcopies 1 5
$ hg debugpathcopies 2 5
x -> z (no-filelog !)
$ hg debugpathcopies 0 5
x -> z
Test for a case in fullcopytracing algorithm where neither of the merging csets
is a descendant of the merge base. This test reflects that the algorithm
correctly finds the copies:
$ cat >> $HGRCPATH << EOF
> [experimental]
> evolution.createmarkers=True
> evolution.allowunstable=True
> EOF
$ newrepo
$ echo a > a
$ hg add a
$ hg ci -m "added a"
$ echo b > b
$ hg add b
$ hg ci -m "added b"
$ hg mv b b1
$ hg ci -m "rename b to b1"
$ hg up ".^"
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo d > d
$ hg add d
$ hg ci -m "added d"
created new head
$ echo baba >> b
$ hg ci --amend -m "added d, modified b"
$ hg l --hidden
@ 4 added d, modified b
| b d
| x 3 added d
|/ d
| o 2 rename b to b1
|/ b b1
o 1 added b
| b
o 0 added a
a
Grafting revision 4 on top of revision 2, showing that it respect the rename:
$ hg up 2 -q
$ hg graft -r 4 --base 3 --hidden
grafting 4:af28412ec03c "added d, modified b" (tip) (no-changeset !)
grafting 4:6325ca0b7a1c "added d, modified b" (tip) (changeset !)
merging b1 and b to b1
$ hg l -l1 -p
@ 5 added d, modified b
| b1
~ diff -r 5a4825cc2926 -r 94a2f1a0e8e2 b1 (no-changeset !)
~ diff -r 0a0ed3b3251c -r d544fb655520 b1 (changeset !)
--- a/b1 Thu Jan 01 00:00:00 1970 +0000
+++ b/b1 Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +1,2 @@
b
+baba
Test to make sure that fullcopytracing algorithm doesn't fail when neither of the
merging csets is a descendant of the base.
-------------------------------------------------------------------------------------------------
$ newrepo
$ echo a > a
$ hg add a
$ hg ci -m "added a"
$ echo b > b
$ hg add b
$ hg ci -m "added b"
$ echo foobar > willconflict
$ hg add willconflict
$ hg ci -m "added willconflict"
$ echo c > c
$ hg add c
$ hg ci -m "added c"
$ hg l
@ 3 added c
| c
o 2 added willconflict
| willconflict
o 1 added b
| b
o 0 added a
a
$ hg up ".^^"
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ echo d > d
$ hg add d
$ hg ci -m "added d"
created new head
$ echo barfoo > willconflict
$ hg add willconflict
$ hg ci --amend -m "added willconflict and d"
$ hg l
@ 5 added willconflict and d
| d willconflict
| o 3 added c
| | c
| o 2 added willconflict
|/ willconflict
o 1 added b
| b
o 0 added a
a
$ hg rebase -r . -d 2 -t :other
rebasing 5:5018b1509e94 tip "added willconflict and d" (no-changeset !)
rebasing 5:af8d273bf580 tip "added willconflict and d" (changeset !)
$ hg up 3 -q
$ hg l --hidden
o 6 added willconflict and d
| d willconflict
| x 5 added willconflict and d
| | d willconflict
| | x 4 added d
| |/ d
+---@ 3 added c
| | c
o | 2 added willconflict
|/ willconflict
o 1 added b
| b
o 0 added a
a
Now if we trigger a merge between revision 3 and 6 using base revision 4,
neither of the merging csets will be a descendant of the base revision:
$ hg graft -r 6 --base 4 --hidden -t :other
grafting 6:99802e4f1e46 "added willconflict and d" (tip) (no-changeset !)
grafting 6:b19f0df72728 "added willconflict and d" (tip) (changeset !)