narrow: intersect provided matcher with narrowmatcher in `hg diff`
This provides significant speedups when running diff, and no change in behavior
that I'm aware of (or that the tests found). I tested with a repo that I started
using narrow in after it was created and attempted to run `hg diff -c .` and
similar commands in it on a commit that had files not in the narrowspec.
Timing numbers below, using a similar setup as my previous commits.
before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and
0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've
encountered where there's one directory with 30k+ subdirectories. N means
narrow, T means treemanifest. The narrowspec is pretty small when in use, and
importantly the narrowspec is applied *after* doing the initial checkout
(without narrowing), so all of these files exist in the filesystem, which is not
normally the case if someone has been using narrow for the entire life of the
clone.
Anything less than a 5% difference in performance is most likely noise.
diff --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2%
m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2%
m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4%
m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3%
l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1%
l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7%
l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <--
l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <--
diff -c . --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8%
m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1%
m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4%
m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6%
l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6%
l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4%
l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <--
l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <--
rebase -r . --keep -d .^^:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3%
m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6%
m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3%
m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4%
l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9%
l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2%
l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1%
l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8%
status --change . --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0%
m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6%
m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0%
m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4%
l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3%
l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--?
l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6%
l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0%
status --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1%
m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6%
m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3%
m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4%
l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8%
l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7%
l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6%
l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9%
update $rev^; ~/src/hg/hg{hg}/hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3%
m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1%
m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1%
m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7%
l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1%
l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9%
l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3%
l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1%
Differential Revision: https://phab.mercurial-scm.org/D4587
This test file aims at test topological iteration and the various configuration it can has.
$ cat >> $HGRCPATH << EOF
> [ui]
> logtemplate={rev}\n
> EOF
On this simple example, all topological branch are displayed in turn until we
can finally display 0. this implies skipping from 8 to 3 and coming back to 7
later.
$ hg init test01
$ cd test01
$ hg unbundle $TESTDIR/bundles/remote.hg
adding changesets
adding manifests
adding file changes
added 9 changesets with 7 changes to 4 files (+1 heads)
new changesets bfaf4b5cbf01:916f1afdef90 (9 drafts)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ hg log -G
o 8
|
| o 7
| |
| o 6
| |
| o 5
| |
| o 4
| |
o | 3
| |
o | 2
| |
o | 1
|/
o 0
(display all nodes)
$ hg log -G -r 'sort(all(), topo)'
o 8
|
o 3
|
o 2
|
o 1
|
| o 7
| |
| o 6
| |
| o 5
| |
| o 4
|/
o 0
(display nodes filtered by log options)
$ hg log -G -r 'sort(all(), topo)' -k '.3'
o 8
|
o 3
|
~
o 7
|
o 6
|
~
(revset skipping nodes)
$ hg log -G --rev 'sort(not (2+6), topo)'
o 8
|
o 3
:
o 1
|
| o 7
| :
| o 5
| |
| o 4
|/
o 0
(begin) from the other branch
$ hg log -G -r 'sort(all(), topo, topo.firstbranch=5)'
o 7
|
o 6
|
o 5
|
o 4
|
| o 8
| |
| o 3
| |
| o 2
| |
| o 1
|/
o 0