narrow: intersect provided matcher with narrowmatcher in `hg diff`
This provides significant speedups when running diff, and no change in behavior
that I'm aware of (or that the tests found). I tested with a repo that I started
using narrow in after it was created and attempted to run `hg diff -c .` and
similar commands in it on a commit that had files not in the narrowspec.
Timing numbers below, using a similar setup as my previous commits.
before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and
0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've
encountered where there's one directory with 30k+ subdirectories. N means
narrow, T means treemanifest. The narrowspec is pretty small when in use, and
importantly the narrowspec is applied *after* doing the initial checkout
(without narrowing), so all of these files exist in the filesystem, which is not
normally the case if someone has been using narrow for the entire life of the
clone.
Anything less than a 5% difference in performance is most likely noise.
diff --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2%
m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2%
m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4%
m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3%
l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1%
l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7%
l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <--
l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <--
diff -c . --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8%
m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1%
m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4%
m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6%
l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6%
l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4%
l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <--
l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <--
rebase -r . --keep -d .^^:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3%
m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6%
m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3%
m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4%
l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9%
l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2%
l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1%
l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8%
status --change . --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0%
m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6%
m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0%
m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4%
l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3%
l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--?
l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6%
l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0%
status --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1%
m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6%
m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3%
m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4%
l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8%
l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7%
l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6%
l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9%
update $rev^; ~/src/hg/hg{hg}/hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3%
m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1%
m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1%
m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7%
l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1%
l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9%
l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3%
l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1%
Differential Revision: https://phab.mercurial-scm.org/D4587
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> [mq]
> git = keep
> [diff]
> nodates = 1
> EOF
init:
$ hg init repo
$ cd repo
$ echo a > a
$ hg ci -Am adda
adding a
$ echo a >> a
$ hg qnew -f p1
$ echo b >> a
$ hg qnew -f p2
$ echo c >> a
$ hg qnew -f p3
Fold in the middle of the queue:
(this tests also that editor is not invoked if '--edit' is not
specified)
$ hg qpop p1
popping p3
popping p2
now at: p1
$ hg qdiff
diff -r 07f494440405 a
--- a/a
+++ b/a
@@ -1,1 +1,2 @@
a
+a
$ HGEDITOR=cat hg qfold p2
$ grep git .hg/patches/p1 && echo 'git patch found!'
[1]
$ hg qser
p1
p3
$ hg qdiff
diff -r 07f494440405 a
--- a/a
+++ b/a
@@ -1,1 +1,3 @@
a
+a
+b
Fold with local changes:
$ echo d >> a
$ hg qfold p3
abort: local changes found, qrefresh first
[255]
$ hg diff -c .
diff -r 07f494440405 -r ???????????? a (glob)
--- a/a
+++ b/a
@@ -1,1 +1,3 @@
a
+a
+b
$ hg revert -a --no-backup
reverting a
Fold git patch into a regular patch, expect git patch:
$ echo a >> a
$ hg qnew -f regular
$ hg cp a aa
$ hg qnew --git -f git
$ hg qpop
popping git
now at: regular
$ hg qfold git
$ cat .hg/patches/regular
# HG changeset patch
# Parent ???????????????????????????????????????? (glob)
diff --git a/a b/a
--- a/a
+++ b/a
@@ -1,3 +1,4 @@
a
a
b
+a
diff --git a/a b/aa
copy from a
copy to aa
--- a/a
+++ b/aa
@@ -1,3 +1,4 @@
a
a
b
+a
$ hg qpop
popping regular
now at: p1
$ hg qdel regular
Fold regular patch into a git patch, expect git patch:
$ hg cp a aa
$ hg qnew --git -f git
$ echo b >> aa
$ hg qnew -f regular
$ hg qpop
popping regular
now at: git
$ hg qfold regular
$ cat .hg/patches/git
# HG changeset patch
# Parent ???????????????????????????????????????? (glob)
diff --git a/a b/aa
copy from a
copy to aa
--- a/a
+++ b/aa
@@ -1,3 +1,4 @@
a
a
b
+b
Test saving last-message.txt:
$ hg qrefresh -m "original message"
$ cat > $TESTTMP/commitfailure.py <<EOF
> from mercurial import error
> def reposetup(ui, repo):
> class commitfailure(repo.__class__):
> def commit(self, *args, **kwargs):
> raise error.Abort('emulating unexpected abort')
> repo.__class__ = commitfailure
> EOF
$ cat >> .hg/hgrc <<EOF
> [extensions]
> # this failure occurs before editor invocation
> commitfailure = $TESTTMP/commitfailure.py
> EOF
$ cat > $TESTTMP/editor.sh << EOF
> echo "==== before editing"
> cat \$1
> echo "===="
> (echo; echo "test saving last-message.txt") >> \$1
> EOF
$ hg qapplied
p1
git
$ hg tip --template "{files}\n"
aa
(test that editor is not invoked before transaction starting,
and that combination of '--edit' and '--message' doesn't abort execution)
$ rm -f .hg/last-message.txt
$ HGEDITOR="sh $TESTTMP/editor.sh" hg qfold -e -m MESSAGE p3
qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
abort: emulating unexpected abort
[255]
$ test -f .hg/last-message.txt
[1]
(reset applied patches and directory status)
$ cat >> .hg/hgrc <<EOF
> [extensions]
> # this failure occurs after editor invocation
> commitfailure = !
> EOF
$ hg qapplied
p1
$ hg status -A aa
? aa
$ rm aa
$ hg status -m
M a
$ hg revert --no-backup -q a
$ hg qpush -q git
now at: git
(test that editor is invoked and commit message is saved into
"last-message.txt")
$ cat >> .hg/hgrc <<EOF
> [hooks]
> # this failure occurs after editor invocation
> pretxncommit.unexpectedabort = false
> EOF
$ rm -f .hg/last-message.txt
$ HGEDITOR="sh $TESTTMP/editor.sh" hg qfold -e p3
==== before editing
original message
HG: Enter commit message. Lines beginning with 'HG:' are removed.
HG: Leave message empty to use default message.
HG: --
HG: user: test
HG: branch 'default'
HG: added aa
HG: changed a
====
note: commit message saved in .hg/last-message.txt
transaction abort!
rollback completed
qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
abort: pretxncommit.unexpectedabort hook exited with status 1
[255]
$ cat .hg/last-message.txt
original message
test saving last-message.txt
(confirm whether files listed up in the commit message editing are correct)
$ cat >> .hg/hgrc <<EOF
> [hooks]
> pretxncommit.unexpectedabort =
> EOF
$ hg status -u | while read f; do rm ${f}; done
$ hg revert --no-backup -q --all
$ hg qpush -q git
now at: git
$ hg qpush -q --move p3
now at: p3
$ hg status --rev "git^1" --rev . -arm
M a
A aa
$ cd ..