narrow: intersect provided matcher with narrowmatcher in `hg diff`
This provides significant speedups when running diff, and no change in behavior
that I'm aware of (or that the tests found). I tested with a repo that I started
using narrow in after it was created and attempted to run `hg diff -c .` and
similar commands in it on a commit that had files not in the narrowspec.
Timing numbers below, using a similar setup as my previous commits.
before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and
0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've
encountered where there's one directory with 30k+ subdirectories. N means
narrow, T means treemanifest. The narrowspec is pretty small when in use, and
importantly the narrowspec is applied *after* doing the initial checkout
(without narrowing), so all of these files exist in the filesystem, which is not
normally the case if someone has been using narrow for the entire life of the
clone.
Anything less than a 5% difference in performance is most likely noise.
diff --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2%
m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2%
m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4%
m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3%
l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1%
l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7%
l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <--
l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <--
diff -c . --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8%
m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1%
m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4%
m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6%
l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6%
l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4%
l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <--
l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <--
rebase -r . --keep -d .^^:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3%
m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6%
m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3%
m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4%
l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9%
l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2%
l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1%
l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8%
status --change . --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0%
m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6%
m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0%
m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4%
l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3%
l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--?
l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6%
l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0%
status --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1%
m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6%
m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3%
m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4%
l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8%
l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7%
l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6%
l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9%
update $rev^; ~/src/hg/hg{hg}/hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3%
m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1%
m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1%
m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7%
l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1%
l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9%
l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3%
l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1%
Differential Revision: https://phab.mercurial-scm.org/D4587
Verify that pending changesets are seen by pretxn* hooks but not by other
processes that access the destination repo while the hooks are running.
The hooks (python and external) both reject changesets after some think time,
during which another process runs pull. Each hook creates a file ('notify') to
indicate to the controlling process that it is running; the process removes the
file to indicate the hook can terminate.
init env vars
$ d=`pwd`
$ maxwait=20
utility to run the test - start a push in the background and run pull
$ dotest() {
> rm -f notify
> printf 'push '; hg -R child-push tip --template '{node}\n'
> hg -R child-push -q push > push.out 2>&1 &
>
> # wait for hook to create the notify file
> i=$maxwait
> while [ ! -f notify -a $i != 0 ]; do
> sleep 1
> i=`expr $i - 1`
> done
>
> # run pull
> hg -R child-pull -q pull
> rc=$?
>
> # tell hook to finish; notify should exist.
> rm notify
> wait
>
> cat push.out
> printf 'pull '; hg -R child-pull tip --template '{node}\n'
> return $rc
> }
python hook
$ cat <<EOF > reject.py
> import os, time
> from mercurial import ui, localrepo
> def rejecthook(ui, repo, hooktype, node, **opts):
> ui.write(b'hook %s\\n' % repo[b'tip'].hex())
> # create the notify file so caller knows we're running
> fpath = os.path.join('$d', 'notify')
> f = open(fpath, 'w')
> f.close()
> # wait for ack - caller should delete the notify file
> i = $maxwait
> while os.path.exists(fpath) and i > 0:
> time.sleep(1)
> i -= 1
> return True # reject the changesets
> EOF
external hook
$ cat <<EOF > reject.sh
> printf 'hook '; hg tip --template '{node}\\n'
> # create the notify file so caller knows we're running
> fpath=$d/notify
> touch \$fpath
> # wait for ack - caller should delete the notify file
> i=$maxwait
> while [ -f \$fpath -a \$i != 0 ]; do
> sleep 1
> i=\`expr \$i - 1\`
> done
> exit 1 # reject the changesets
> EOF
create repos
$ hg init parent
$ hg clone -q parent child-push
$ hg clone -q parent child-pull
$ echo a > child-push/a
$ hg -R child-push add child-push/a
$ hg -R child-push commit -m a -d '1000000 0'
test python hook
$ cat <<EOF > parent/.hg/hgrc
> [extensions]
> reject = $d/reject.py
> [hooks]
> pretxnchangegroup = python:reject.rejecthook
> EOF
$ dotest
push 29b62aeb769fdf78d8d9c5f28b017f76d7ef824b
hook 29b62aeb769fdf78d8d9c5f28b017f76d7ef824b
transaction abort!
rollback completed
abort: pretxnchangegroup hook failed
pull 0000000000000000000000000000000000000000
test external hook
$ cat <<EOF > parent/.hg/hgrc
> [hooks]
> pretxnchangegroup = sh $d/reject.sh
> EOF
$ dotest
push 29b62aeb769fdf78d8d9c5f28b017f76d7ef824b
hook 29b62aeb769fdf78d8d9c5f28b017f76d7ef824b
transaction abort!
rollback completed
abort: pretxnchangegroup hook exited with status 1
pull 0000000000000000000000000000000000000000
Test that pending on transaction without changegroup see the normal changegroup(
(issue4609)
$ cat <<EOF > parent/.hg/hgrc
> [hooks]
> pretxnchangegroup=
> pretxnclose = hg tip -T "tip: {node|short}\n"
> [phases]
> publishing=False
> EOF
setup
$ cd parent
$ echo a > a
$ hg add a
$ hg commit -m a
tip: cb9a9f314b8b
actual test
$ hg phase --public .
tip: cb9a9f314b8b