narrow: intersect provided matcher with narrowmatcher in `hg diff`
This provides significant speedups when running diff, and no change in behavior
that I'm aware of (or that the tests found). I tested with a repo that I started
using narrow in after it was created and attempted to run `hg diff -c .` and
similar commands in it on a commit that had files not in the narrowspec.
Timing numbers below, using a similar setup as my previous commits.
before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and
0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've
encountered where there's one directory with 30k+ subdirectories. N means
narrow, T means treemanifest. The narrowspec is pretty small when in use, and
importantly the narrowspec is applied *after* doing the initial checkout
(without narrowing), so all of these files exist in the filesystem, which is not
normally the case if someone has been using narrow for the entire life of the
clone.
Anything less than a 5% difference in performance is most likely noise.
diff --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2%
m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2%
m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4%
m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3%
l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1%
l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7%
l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <--
l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <--
diff -c . --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8%
m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1%
m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4%
m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6%
l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6%
l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4%
l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <--
l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <--
rebase -r . --keep -d .^^:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3%
m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6%
m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3%
m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4%
l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9%
l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2%
l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1%
l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8%
status --change . --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0%
m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6%
m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0%
m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4%
l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3%
l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--?
l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6%
l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0%
status --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1%
m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6%
m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3%
m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4%
l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8%
l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7%
l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6%
l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9%
update $rev^; ~/src/hg/hg{hg}/hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3%
m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1%
m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1%
m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7%
l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1%
l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9%
l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3%
l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1%
Differential Revision: https://phab.mercurial-scm.org/D4587
$ cat <<EOF >> $HGRCPATH
> [ui]
> color = always
> [color]
> mode = ansi
> EOF
Terminfo codes compatibility fix
$ echo "color.none=0" >> $HGRCPATH
$ hg init repo1
$ cd repo1
$ mkdir a b a/1 b/1 b/2
$ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2
hg status in repo root:
$ hg status
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
$ hg status --color=debug
[status.unknown|? ][status.unknown|a/1/in_a_1]
[status.unknown|? ][status.unknown|a/in_a]
[status.unknown|? ][status.unknown|b/1/in_b_1]
[status.unknown|? ][status.unknown|b/2/in_b_2]
[status.unknown|? ][status.unknown|b/in_b]
[status.unknown|? ][status.unknown|in_root]
HGPLAIN disables color
$ HGPLAIN=1 hg status --color=debug
? a/1/in_a_1 (glob)
? a/in_a (glob)
? b/1/in_b_1 (glob)
? b/2/in_b_2 (glob)
? b/in_b (glob)
? in_root
HGPLAINEXCEPT=color does not disable color
$ HGPLAINEXCEPT=color hg status --color=debug
[status.unknown|? ][status.unknown|a/1/in_a_1] (glob)
[status.unknown|? ][status.unknown|a/in_a] (glob)
[status.unknown|? ][status.unknown|b/1/in_b_1] (glob)
[status.unknown|? ][status.unknown|b/2/in_b_2] (glob)
[status.unknown|? ][status.unknown|b/in_b] (glob)
[status.unknown|? ][status.unknown|in_root]
hg status with template
$ hg status -T "{label('red', path)}\n" --color=debug
[red|a/1/in_a_1]
[red|a/in_a]
[red|b/1/in_b_1]
[red|b/2/in_b_2]
[red|b/in_b]
[red|in_root]
hg status . in repo root:
$ hg status .
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
$ hg status --cwd a
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
$ hg status --cwd a .
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a\x1b[0m (esc)
$ hg status --cwd a ..
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../b/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../b/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../b/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_root\x1b[0m (esc)
$ hg status --cwd b
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
$ hg status --cwd b .
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b\x1b[0m (esc)
$ hg status --cwd b ..
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../a/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../a/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_root\x1b[0m (esc)
$ hg status --cwd a/1
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
$ hg status --cwd a/1 .
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a_1\x1b[0m (esc)
$ hg status --cwd a/1 ..
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_a\x1b[0m (esc)
$ hg status --cwd b/1
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
$ hg status --cwd b/1 .
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_1\x1b[0m (esc)
$ hg status --cwd b/1 ..
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_b\x1b[0m (esc)
$ hg status --cwd b/2
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/1/in_a_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4ma/in_a\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/2/in_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4mb/in_b\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_root\x1b[0m (esc)
$ hg status --cwd b/2 .
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_2\x1b[0m (esc)
$ hg status --cwd b/2 ..
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../1/in_b_1\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4min_b_2\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4m../in_b\x1b[0m (esc)
Make sure --color=never works
$ hg status --color=never
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
Make sure ui.formatted=False works
$ hg status --color=auto --config ui.formatted=False
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ cd ..
$ hg init repo2
$ cd repo2
$ touch modified removed deleted ignored
$ echo "^ignored$" > .hgignore
$ hg ci -A -m 'initial checkin'
\x1b[0;32madding .hgignore\x1b[0m (esc)
\x1b[0;32madding deleted\x1b[0m (esc)
\x1b[0;32madding modified\x1b[0m (esc)
\x1b[0;32madding removed\x1b[0m (esc)
$ hg log --color=debug
[log.changeset changeset.draft|changeset: 0:389aef86a55e]
[log.tag|tag: tip]
[log.user|user: test]
[log.date|date: Thu Jan 01 00:00:00 1970 +0000]
[log.summary|summary: initial checkin]
$ hg log -Tcompact --color=debug
[log.changeset changeset.draft|0][tip] [log.node|389aef86a55e] [log.date|1970-01-01 00:00 +0000] [log.user|test]
[ui.note log.description|initial checkin]
Labels on empty strings should not be displayed, labels on custom
templates should be.
$ hg log --color=debug -T '{label("my.label",author)}\n{label("skipped.label","")}'
[my.label|test]
$ touch modified added unknown ignored
$ hg add added
$ hg remove removed
$ rm deleted
hg status:
$ hg status
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
\x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
\x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
hg status modified added removed deleted unknown never-existed ignored:
$ hg status modified added removed deleted unknown never-existed ignored
never-existed: * (glob)
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
\x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
\x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
$ hg copy modified copied
hg status -C:
$ hg status -C
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1mcopied\x1b[0m (esc)
\x1b[0;0m modified\x1b[0m (esc)
\x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
\x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
hg status -A:
$ hg status -A
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1mcopied\x1b[0m (esc)
\x1b[0;0m modified\x1b[0m (esc)
\x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
\x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
\x1b[0;30;1mI \x1b[0m\x1b[0;30;1mignored\x1b[0m (esc)
\x1b[0;0mC \x1b[0m\x1b[0;0m.hgignore\x1b[0m (esc)
\x1b[0;0mC \x1b[0m\x1b[0;0mmodified\x1b[0m (esc)
hg status -A (with terminfo color):
#if tic
$ mkdir "$TESTTMP/terminfo"
$ TERMINFO="$TESTTMP/terminfo" tic "$TESTDIR/hgterm.ti"
$ TERM=hgterm TERMINFO="$TESTTMP/terminfo" hg status --config color.mode=terminfo -A
\x1b[30m\x1b[32m\x1b[1mA \x1b[30m\x1b[30m\x1b[32m\x1b[1madded\x1b[30m (esc)
\x1b[30m\x1b[32m\x1b[1mA \x1b[30m\x1b[30m\x1b[32m\x1b[1mcopied\x1b[30m (esc)
\x1b[30m\x1b[30m modified\x1b[30m (esc)
\x1b[30m\x1b[31m\x1b[1mR \x1b[30m\x1b[30m\x1b[31m\x1b[1mremoved\x1b[30m (esc)
\x1b[30m\x1b[36m\x1b[1m\x1b[4m! \x1b[30m\x1b[30m\x1b[36m\x1b[1m\x1b[4mdeleted\x1b[30m (esc)
\x1b[30m\x1b[35m\x1b[1m\x1b[4m? \x1b[30m\x1b[30m\x1b[35m\x1b[1m\x1b[4munknown\x1b[30m (esc)
\x1b[30m\x1b[30m\x1b[1mI \x1b[30m\x1b[30m\x1b[30m\x1b[1mignored\x1b[30m (esc)
\x1b[30m\x1b[30mC \x1b[30m\x1b[30m\x1b[30m.hgignore\x1b[30m (esc)
\x1b[30m\x1b[30mC \x1b[30m\x1b[30m\x1b[30mmodified\x1b[30m (esc)
The user can define effects with raw terminfo codes:
$ cat <<EOF >> $HGRCPATH
> # Completely bogus code for dim
> terminfo.dim = \E[88m
> # We can override what's in the terminfo database, too
> terminfo.bold = \E[2m
> EOF
$ TERM=hgterm TERMINFO="$TESTTMP/terminfo" hg status --config color.mode=terminfo --config color.status.clean=dim -A
\x1b[30m\x1b[32m\x1b[2mA \x1b[30m\x1b[30m\x1b[32m\x1b[2madded\x1b[30m (esc)
\x1b[30m\x1b[32m\x1b[2mA \x1b[30m\x1b[30m\x1b[32m\x1b[2mcopied\x1b[30m (esc)
\x1b[30m\x1b[30m modified\x1b[30m (esc)
\x1b[30m\x1b[31m\x1b[2mR \x1b[30m\x1b[30m\x1b[31m\x1b[2mremoved\x1b[30m (esc)
\x1b[30m\x1b[36m\x1b[2m\x1b[4m! \x1b[30m\x1b[30m\x1b[36m\x1b[2m\x1b[4mdeleted\x1b[30m (esc)
\x1b[30m\x1b[35m\x1b[2m\x1b[4m? \x1b[30m\x1b[30m\x1b[35m\x1b[2m\x1b[4munknown\x1b[30m (esc)
\x1b[30m\x1b[30m\x1b[2mI \x1b[30m\x1b[30m\x1b[30m\x1b[2mignored\x1b[30m (esc)
\x1b[30m\x1b[88mC \x1b[30m\x1b[30m\x1b[88m.hgignore\x1b[30m (esc)
\x1b[30m\x1b[88mC \x1b[30m\x1b[30m\x1b[88mmodified\x1b[30m (esc)
#endif
$ echo "^ignoreddir$" > .hgignore
$ mkdir ignoreddir
$ touch ignoreddir/file
hg status ignoreddir/file:
$ hg status ignoreddir/file
hg status -i ignoreddir/file:
$ hg status -i ignoreddir/file
\x1b[0;30;1mI \x1b[0m\x1b[0;30;1mignoreddir/file\x1b[0m (esc)
$ cd ..
check 'status -q' and some combinations
$ hg init repo3
$ cd repo3
$ touch modified removed deleted ignored
$ echo "^ignored$" > .hgignore
$ hg commit -A -m 'initial checkin'
\x1b[0;32madding .hgignore\x1b[0m (esc)
\x1b[0;32madding deleted\x1b[0m (esc)
\x1b[0;32madding modified\x1b[0m (esc)
\x1b[0;32madding removed\x1b[0m (esc)
$ touch added unknown ignored
$ hg add added
$ echo "test" >> modified
$ hg remove removed
$ rm deleted
$ hg copy modified copied
test unknown color
$ hg --config color.status.modified=periwinkle status
ignoring unknown color/effect 'periwinkle' (configured in color.status.modified)
ignoring unknown color/effect 'periwinkle' (configured in color.status.modified)
ignoring unknown color/effect 'periwinkle' (configured in color.status.modified)
M modified
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1madded\x1b[0m (esc)
\x1b[0;32;1mA \x1b[0m\x1b[0;32;1mcopied\x1b[0m (esc)
\x1b[0;31;1mR \x1b[0m\x1b[0;31;1mremoved\x1b[0m (esc)
\x1b[0;36;1;4m! \x1b[0m\x1b[0;36;1;4mdeleted\x1b[0m (esc)
\x1b[0;35;1;4m? \x1b[0m\x1b[0;35;1;4munknown\x1b[0m (esc)
Run status with 2 different flags.
Check if result is the same or different.
If result is not as expected, raise error
$ assert() {
> hg status $1 > ../a
> hg status $2 > ../b
> if diff ../a ../b > /dev/null; then
> out=0
> else
> out=1
> fi
> if [ $3 -eq 0 ]; then
> df="same"
> else
> df="different"
> fi
> if [ $out -ne $3 ]; then
> echo "Error on $1 and $2, should be $df."
> fi
> }
assert flag1 flag2 [0-same | 1-different]
$ assert "-q" "-mard" 0
$ assert "-A" "-marduicC" 0
$ assert "-qA" "-mardcC" 0
$ assert "-qAui" "-A" 0
$ assert "-qAu" "-marducC" 0
$ assert "-qAi" "-mardicC" 0
$ assert "-qu" "-u" 0
$ assert "-q" "-u" 1
$ assert "-m" "-a" 1
$ assert "-r" "-d" 1
$ cd ..
test 'resolve -l'
$ hg init repo4
$ cd repo4
$ echo "file a" > a
$ echo "file b" > b
$ hg add a b
$ hg commit -m "initial"
$ echo "file a change 1" > a
$ echo "file b change 1" > b
$ hg commit -m "head 1"
$ hg update 0
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo "file a change 2" > a
$ echo "file b change 2" > b
$ hg commit -m "head 2"
created new head
$ hg merge
merging a
merging b
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 2 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg resolve -m b
hg resolve with one unresolved, one resolved:
$ hg resolve -l
\x1b[0;31;1mU \x1b[0m\x1b[0;31;1ma\x1b[0m (esc)
\x1b[0;32;1mR \x1b[0m\x1b[0;32;1mb\x1b[0m (esc)
color coding of error message with current availability of curses
$ hg unknowncommand > /dev/null
hg: unknown command 'unknowncommand'
(use 'hg help' for a list of commands)
[255]
color coding of error message without curses
$ echo 'raise ImportError' > curses.py
$ PYTHONPATH=`pwd`:$PYTHONPATH hg unknowncommand > /dev/null
hg: unknown command 'unknowncommand'
(use 'hg help' for a list of commands)
[255]
$ cd ..