heptapod-ci: actually give pytest more time before timeout
`HGTEST_TIMEOUT` is overridden by `HGTEST_SLOWTIMEOUT` for tests marked as
slow, which `test-check-pytype.t` is. So this whole time the timeout was 1500s
(or 25 minutes), which is unfortunately not long enough for a *lot* of the
times it's run on the CI.
Differential Revision: https://phab.mercurial-scm.org/D11717
#require svn svn-bindings
$ filter_svn_output () {
> egrep -v 'Committing|Updating|(^$)' | sed -e 's/done$//' || true
> }
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> [convert]
> svn.trunk = mytrunk
> EOF
$ svnadmin create svn-repo
$ SVNREPOPATH=`pwd`/svn-repo
$ SVNREPOURL="`"$PYTHON" $TESTDIR/svnurlof.py \"$SVNREPOPATH\"`"
$ INVALIDREVISIONID=svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1
$ VALIDREVISIONID=svn:a2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk/mytrunk@1
Now test that it works with trunk/tags layout, but no branches yet.
Initial svn import
$ mkdir projB
$ cd projB
$ mkdir mytrunk
$ mkdir tags
$ cd ..
$ svn import -m "init projB" projB "$SVNREPOURL/proj%20B" | filter_svn_output | sort
Adding projB/mytrunk
Adding projB/tags
Committed revision 1.
Update svn repository
$ svn co "$SVNREPOURL/proj%20B/mytrunk" B | filter_svn_output
Checked out revision 1.
$ cd B
$ echo hello > 'letter .txt'
$ svn add 'letter .txt' | filter_svn_output
A letter .txt
$ svn ci -m hello | filter_svn_output
Adding letter .txt
Transmitting file data .
Committed revision 2.
$ svn-safe-append.py world 'letter .txt'
$ svn ci -m world | filter_svn_output
Sending letter .txt
Transmitting file data .
Committed revision 3.
$ svn copy -m "tag v0.1" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.1" | filter_svn_output
Committed revision 4.
$ svn-safe-append.py 'nice day today!' 'letter .txt'
$ svn ci -m "nice day" | filter_svn_output
Sending letter .txt
Transmitting file data .
Committed revision 5.
$ cd ..
Convert to hg once and also test localtimezone option
NOTE: This doesn't check all time zones -- it merely determines that
the configuration option is taking effect.
An arbitrary (U.S.) time zone is used here. TZ=US/Hawaii is selected
since it does not use DST (unlike other U.S. time zones) and is always
a fixed difference from UTC.
$ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
initializing destination B-hg repository
scanning source...
sorting...
converting...
3 init projB
2 hello
1 world
0 nice day
updating tags
Update svn repository again
$ cd B
$ svn-safe-append.py "see second letter" 'letter .txt'
$ echo "nice to meet you" > letter2.txt
$ svn add letter2.txt | filter_svn_output
A letter2.txt
$ svn ci -m "second letter" | filter_svn_output
Sending letter .txt
Adding letter2.txt
Transmitting file data ..
Committed revision 6.
$ svn copy -m "tag v0.2" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.2" | filter_svn_output
Committed revision 7.
$ svn-safe-append.py "blah-blah-blah" letter2.txt
$ svn ci -m "work in progress" | filter_svn_output
Sending letter2.txt
Transmitting file data .
Committed revision 8.
$ cd ..
$ hg convert -s svn "$SVNREPOURL/proj%20B/non-existent-path" dest
initializing destination dest repository
abort: no revision found in module /proj B/non-existent-path
[255]
########################################
Test incremental conversion
$ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
scanning source...
sorting...
converting...
1 second letter
0 work in progress
updating tags
$ cd B-hg
$ hg log -G --template '{rev} {desc|firstline} date: {date|date} files: {files}\n'
o 7 update tags date: * +0000 files: .hgtags (glob)
|
o 6 work in progress date: * -1000 files: letter2.txt (glob)
|
o 5 second letter date: * -1000 files: letter .txt letter2.txt (glob)
|
o 4 update tags date: * +0000 files: .hgtags (glob)
|
o 3 nice day date: * -1000 files: letter .txt (glob)
|
o 2 world date: * -1000 files: letter .txt (glob)
|
o 1 hello date: * -1000 files: letter .txt (glob)
|
o 0 init projB date: * -1000 files: (glob)
$ hg tags -q
tip
v0.2
v0.1
$ cd ..
Test filemap
$ echo 'include letter2.txt' > filemap
$ hg convert --filemap filemap "$SVNREPOURL/proj%20B/mytrunk" fmap
initializing destination fmap repository
scanning source...
sorting...
converting...
5 init projB
4 hello
3 world
2 nice day
1 second letter
0 work in progress
$ hg -R fmap branch -q
default
$ hg log -G -R fmap --template '{rev} {desc|firstline} files: {files}\n'
o 1 work in progress files: letter2.txt
|
o 0 second letter files: letter2.txt
Convert with --full adds and removes files that didn't change
$ cd B
$ echo >> "letter .txt"
$ svn ci -m 'nothing' | filter_svn_output
Sending letter .txt
Transmitting file data .
Committed revision 9.
$ cd ..
$ echo 'rename letter2.txt letter3.txt' > filemap
$ hg convert --filemap filemap --full "$SVNREPOURL/proj%20B/mytrunk" fmap
scanning source...
sorting...
converting...
0 nothing
$ hg -R fmap st --change tip
A letter .txt
A letter3.txt
R letter2.txt
test invalid splicemap1
$ cat > splicemap <<EOF
> $INVALIDREVISIONID $VALIDREVISIONID
> EOF
$ hg convert --splicemap splicemap "$SVNREPOURL/proj%20B/mytrunk" smap
initializing destination smap repository
abort: splicemap entry svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1 is not a valid revision identifier
[255]
Test stop revision
$ hg convert --rev 1 "$SVNREPOURL/proj%20B/mytrunk" stoprev
initializing destination stoprev repository
scanning source...
sorting...
converting...
0 init projB
$ hg -R stoprev branch -q
default
Check convert_revision extra-records.
This is also the only place testing more than one extra field in a revision.
$ cd stoprev
$ hg tip --debug | grep extra
extra: branch=default
extra: convert_revision=svn:........-....-....-....-............/proj B/mytrunk@1 (re)
$ cd ..
Test converting empty heads (issue3347).
Also tests getting logs directly without debugsvnlog.
$ svnadmin create svn-empty
$ svnadmin load -q svn-empty < "$TESTDIR/svn/empty.svndump"
$ hg --config convert.svn.trunk= --config convert.svn.debugsvnlog=0 convert svn-empty
assuming destination svn-empty-hg
initializing destination svn-empty-hg repository
scanning source...
sorting...
converting...
1 init projA
0 adddir
$ hg --config convert.svn.trunk= convert "$SVNREPOURL/../svn-empty/trunk"
assuming destination trunk-hg
initializing destination trunk-hg repository
scanning source...
sorting...
converting...
1 init projA
0 adddir
Test that a too-new repository format is properly rejected:
$ mv svn-empty/format format
$ echo 999 > svn-empty/format
It's important that this command explicitly specify svn, otherwise it
can have surprising side effects (like falling back to a perforce
depot that can be seen from the test environment and slurping from that.)
$ hg convert --source-type svn svn-empty this-will-fail
initializing destination this-will-fail repository
file:/*/$TESTTMP/svn-empty does not look like a Subversion repository to libsvn version 1.*.* (glob)
abort: svn-empty: missing or unsupported repository
[255]
$ mv format svn-empty/format
enable svn subrepos
$ cat >> $HGRCPATH <<EOF
> [subrepos]
> svn:allowed = true
> EOF
try converting when we have an svn subrepo and a merge in hg superrepo (issue5657)
$ cd "$TESTTMP"
$ hg init withmerge
$ cd withmerge
$ echo "subrepo = [svn]$SVNREPOURL" >.hgsub
$ hg add .hgsub
$ svn checkout "$SVNREPOURL" subrepo | sort
A subrepo/proj B
A subrepo/proj B/mytrunk
A subrepo/proj B/mytrunk/letter .txt
A subrepo/proj B/mytrunk/letter2.txt
A subrepo/proj B/tags
A subrepo/proj B/tags/v0.1
A subrepo/proj B/tags/v0.1/letter .txt
A subrepo/proj B/tags/v0.2
A subrepo/proj B/tags/v0.2/letter .txt
A subrepo/proj B/tags/v0.2/letter2.txt
Checked out revision 9.
$ hg ci -m "Adding svn subrepo"
$ touch file1.txt
$ hg add file1.txt
$ hg ci -m "Adding file1"
$ hg up 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ touch file2.txt
$ hg add file2.txt
$ hg ci -m "Adding file2"
created new head
$ hg merge 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m "merged"
$ cd ..
$ hg --config extensions.convert= convert withmerge withmerge-converted
initializing destination withmerge-converted repository
scanning source...
sorting...
converting...
3 Adding svn subrepo
2 Adding file1
1 Adding file2
0 merged
$ cd withmerge-converted
$ hg up | sort
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
A subrepo/proj B
A subrepo/proj B/mytrunk
A subrepo/proj B/mytrunk/letter .txt
A subrepo/proj B/mytrunk/letter2.txt
A subrepo/proj B/tags
A subrepo/proj B/tags/v0.1
A subrepo/proj B/tags/v0.1/letter .txt
A subrepo/proj B/tags/v0.2
A subrepo/proj B/tags/v0.2/letter .txt
A subrepo/proj B/tags/v0.2/letter2.txt
Checked out revision 9.
$ ls
file1.txt
file2.txt
subrepo