absorb: make it explicit if empty changeset was created
If the config rewrite.empty-successor=skip is set, a message "became empty and
was dropped" is shown if the changeset became empty. If the config
rewrite.empty-successor=keep is set, absorb may create changesets even if they
became empty. It’s probably a good idea to make that explicit. Therefore the
message is changed to be a combination of both: "became empty and became ...".
Repeating the word "became" is not very elegant. This results from the fact
that "became" was and is overloaded to indicate both the change from non-empty
to empty and the successor relation. In the combinated message, both meanings
are used in one sentence.
initialize
$ make_changes() {
> d=`pwd`
> [ ! -z $1 ] && cd $1
> echo "test `basename \`pwd\``" >> test
> hg commit -Am"${2:-test}"
> r=$?
> cd $d
> return $r
> }
$ ls -1a
.
..
$ hg init a
$ cd a
$ echo 'test' > test; hg commit -Am'test'
adding test
clone to b
$ mkdir ../b
$ cd ../b
$ hg clone ../a .
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo "[extensions]" >> .hg/hgrc
$ echo "bookflow=" >> .hg/hgrc
$ hg branch X
abort: creating named branches is disabled and you should use bookmarks
(see 'hg help bookflow')
[255]
$ hg bookmark X
$ hg bookmarks
* X 0:* (glob)
$ hg bookmark X
abort: bookmark X already exists, to move use the --rev option
[255]
$ make_changes
$ hg push ../a -q
$ hg bookmarks
\* X 1:* (glob)
change a
$ cd ../a
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 'test' >> test; hg commit -Am'test'
pull in b
$ cd ../b
$ hg pull -u
pulling from $TESTTMP/a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets * (glob)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(leaving bookmark X)
$ hg status
$ hg bookmarks
X 1:* (glob)
check protection of @ bookmark
$ hg bookmark @
$ hg bookmarks
\* @ 2:* (glob)
X 1:* (glob)
$ make_changes
abort: cannot commit, bookmark @ is protected
[255]
$ hg status
M test
$ hg bookmarks
\* @ 2:* (glob)
X 1:* (glob)
$ hg --config bookflow.protect= commit -Am"Updated test"
$ hg bookmarks
\* @ 3:* (glob)
X 1:* (glob)
check requirement for an active bookmark
$ hg bookmark -i
$ hg bookmarks
@ 3:* (glob)
X 1:* (glob)
$ make_changes
abort: cannot commit without an active bookmark
[255]
$ hg revert test
$ rm test.orig
$ hg status
make the bookmark move by updating it on a, and then pulling
# add a commit to a
$ cd ../a
$ hg bookmark X
$ hg bookmarks
\* X 2:* (glob)
$ make_changes
$ hg bookmarks
* X 3:81af7977fdb9
# go back to b, and check out X
$ cd ../b
$ hg up X
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(activating bookmark X)
$ hg bookmarks
@ 3:* (glob)
\* X 1:* (glob)
# pull, this should move the bookmark forward, because it was changed remotely
$ hg pull -u | grep "updating to active bookmark X"
updating to active bookmark X
$ hg bookmarks
@ 3:* (glob)
* X 4:81af7977fdb9
the bookmark should not move if it diverged from remote
$ hg -R ../a status
$ hg -R ../b status
$ make_changes ../a
$ make_changes ../b
$ hg -R ../a status
$ hg -R ../b status
$ hg -R ../a bookmarks
* X 4:238292f60a57
$ hg -R ../b bookmarks
@ 3:* (glob)
* X 5:096f7e86892d
$ cd ../b
$ # make sure we cannot push after bookmarks diverged
$ hg push -B X | grep abort
abort: push creates new remote head * with bookmark 'X'! (glob)
(pull and merge or see 'hg help push' for details about pushing new heads)
[1]
$ hg pull -u | grep divergent
divergent bookmark X stored as X@default
1 other divergent bookmarks for "X"
$ hg bookmarks
@ 3:* (glob)
* X 5:096f7e86892d
X@default 6:238292f60a57
$ hg id -in
096f7e86892d 5
$ make_changes
$ hg status
$ hg bookmarks
@ 3:* (glob)
* X 7:227f941aeb07
X@default 6:238292f60a57
now merge with the remote bookmark
$ hg merge X@default --tool :local -q
$ hg status
M test
$ hg commit -m"Merged with X@default"
$ hg bookmarks
@ 3:* (glob)
* X 8:26fed9bb3219
$ hg push -B X | grep bookmark
pushing to $TESTTMP/a (?)
updating bookmark X
$ cd ../a
$ hg up -q
$ hg bookmarks
* X 7:26fed9bb3219
test hg pull when there is more than one descendant
$ cd ../a
$ hg bookmark Z
$ hg bookmark Y
$ make_changes . YY
$ hg up Z -q
$ make_changes . ZZ
created new head
$ hg bookmarks
X 7:26fed9bb3219
Y 8:131e663dbd2a
* Z 9:b74a4149df25
$ hg log -r 'p1(Y)' -r 'p1(Z)' -T '{rev}\n' # prove that Y and Z share the same parent
7
$ hg log -r 'Y%Z' -T '{rev}\n' # revs in Y but not in Z
8
$ hg log -r 'Z%Y' -T '{rev}\n' # revs in Z but not in Y
9
$ cd ../b
$ hg pull -uq
$ hg id
b74a4149df25 tip Z
$ hg bookmarks | grep \* # no active bookmark
[1]
test shelving
$ cd ../a
$ echo anotherfile > anotherfile # this change should not conflict
$ hg add anotherfile
$ hg commit -m"Change in a"
$ cd ../b
$ hg up Z | grep Z
(activating bookmark Z)
$ hg book | grep \* # make sure active bookmark
\* Z 10:* (glob)
$ echo "test b" >> test
$ hg diff --stat
test | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg shelve
shelved as Z
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg pull -uq
$ hg unshelve
unshelving change 'Z'
rebasing shelved changes
$ hg diff --stat
test | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
make the bookmark move by updating it on a, and then pulling with a local change
# add a commit to a
$ cd ../a
$ hg up -C X |fgrep "activating bookmark X"
(activating bookmark X)
# go back to b, and check out X
$ cd ../b
$ hg up -C X |fgrep "activating bookmark X"
(activating bookmark X)
# update and push from a
$ make_changes ../a
created new head
$ echo "more" >> test
$ hg pull -u 2>&1 | fgrep -v TESTTMP| fgrep -v "searching for changes" | fgrep -v adding
pulling from $TESTTMP/a
updating bookmark X
added 1 changesets with 0 changes to 0 files (+1 heads)
new changesets * (glob)
updating to active bookmark X
merging test
warning: conflicts while merging test! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges
$ hg update -Cq
$ rm test.orig
make sure that commits aren't possible if working directory is not pointing to active bookmark
$ hg -R ../a status
$ hg -R ../b status
$ hg -R ../a id -i
36a6e592ec06
$ hg -R ../a book | grep X
\* X \d+:36a6e592ec06 (re)
$ hg -R ../b id -i
36a6e592ec06
$ hg -R ../b book | grep X
\* X \d+:36a6e592ec06 (re)
$ make_changes ../a
$ hg -R ../a book | grep X
\* X \d+:f73a71c992b8 (re)
$ cd ../b
$ hg pull 2>&1 | grep -v add | grep -v pulling | grep -v searching | grep -v changeset
updating bookmark X
(run 'hg update' to get a working copy)
working directory out of sync with active bookmark, run 'hg up X'
$ hg id -i # we're still on the old commit
36a6e592ec06
$ hg book | grep X # while the bookmark moved
\* X \d+:f73a71c992b8 (re)
$ make_changes
abort: cannot commit, working directory out of sync with active bookmark
(run 'hg up X')
[255]
$ hg up -Cq -r . # cleanup local changes
$ hg status
$ hg id -i # we're still on the old commit
36a6e592ec06
$ hg up X -q
$ hg id -i # now we're on X
f73a71c992b8
$ hg book | grep X
\* X \d+:f73a71c992b8 (re)