perf: use locally defined revlog option list for Mercurial earlier than 3.7
Before this patch, referring commands.debugrevlogopts prevents perf.py
from being loaded by Mercurial earlier than 3.7 (or 5606f7d0d063),
because it isn't available in such Mercurial, even though
cmdutil.openrevlog(), a user of these options, has been available
since 1.9 (or a79fea6b3e77).
In addition to it, there are some code paths for Mercurial earlier
than 3.7. For example, setting "_prereadsize" attribute in perfindex()
and perfnodelookup() is effective only with hg earlier than 1.8 (or
61c9bc3da402).
But just "using locally defined revlog option list" might cause
unexpected behavior at runtime. If --dir option is specified to
cmdutil.openrevlog() of Mercurial earlier than 3.5 (or 49c583ca48c4),
it is silently ignored without any warning or so.
============ ============ ===== ===============
debugrevlogopts
hg version openrevlog() --dir of commands
============ ============ ===== ===============
3.7 or later o o o
3.5 or later o o x
1.9 or later o x x
earlier x x x
============ ============ ===== ===============
Therefore, this patch does:
- use locally defined option list, if commands.debugrevlogopts isn't
available (for Mercurial earlier than 3.7)
- wrap cmdutil.openrevlog(), if it is ambiguous whether
cmdutil.openrevlog() can recognize --dir option correctly
(for Mercurial earlier than 3.5)
This wrapper function aborts execution, if:
- --dir option is specified, and
- localrepository doesn't have "dirlog" attribute, which indicates
that localrepository has a function for '--dir'
BTW, extensions.wrapfunction() has been available since 1.1 (or
0ab5f21c390b), and this seems old enough for "historical
portability" of perf.py, which has been available since 1.1 (or
eb240755386d).
# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <vadim.gelfer@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''pull, update and merge in one command (DEPRECATED)'''
from __future__ import absolute_import
from mercurial.i18n import _
from mercurial.node import (
short,
)
from mercurial import (
cmdutil,
commands,
error,
exchange,
hg,
lock,
util,
)
release = lock.release
cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'
@command('fetch',
[('r', 'rev', [],
_('a specific revision you would like to pull'), _('REV')),
('e', 'edit', None, _('invoke editor on commit messages')),
('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
('', 'switch-parent', None, _('switch parents when merging')),
] + commands.commitopts + commands.commitopts2 + commands.remoteopts,
_('hg fetch [SOURCE]'))
def fetch(ui, repo, source='default', **opts):
'''pull changes from a remote repository, merge new changes if needed.
This finds all changes from the repository at the specified path
or URL and adds them to the local repository.
If the pulled changes add a new branch head, the head is
automatically merged, and the result of the merge is committed.
Otherwise, the working directory is updated to include the new
changes.
When a merge is needed, the working directory is first updated to
the newly pulled changes. Local changes are then merged into the
pulled changes. To switch the merge order, use --switch-parent.
See :hg:`help dates` for a list of formats valid for -d/--date.
Returns 0 on success.
'''
date = opts.get('date')
if date:
opts['date'] = util.parsedate(date)
parent, _p2 = repo.dirstate.parents()
branch = repo.dirstate.branch()
try:
branchnode = repo.branchtip(branch)
except error.RepoLookupError:
branchnode = None
if parent != branchnode:
raise error.Abort(_('working directory not at branch tip'),
hint=_("use 'hg update' to check out branch tip"))
wlock = lock = None
try:
wlock = repo.wlock()
lock = repo.lock()
cmdutil.bailifchanged(repo)
bheads = repo.branchheads(branch)
bheads = [head for head in bheads if len(repo[head].children()) == 0]
if len(bheads) > 1:
raise error.Abort(_('multiple heads in this branch '
'(use "hg heads ." and "hg merge" to merge)'))
other = hg.peer(repo, opts, ui.expandpath(source))
ui.status(_('pulling from %s\n') %
util.hidepassword(ui.expandpath(source)))
revs = None
if opts['rev']:
try:
revs = [other.lookup(rev) for rev in opts['rev']]
except error.CapabilityError:
err = _("other repository doesn't support revision lookup, "
"so a rev cannot be specified.")
raise error.Abort(err)
# Are there any changes at all?
modheads = exchange.pull(repo, other, heads=revs).cgresult
if modheads == 0:
return 0
# Is this a simple fast-forward along the current branch?
newheads = repo.branchheads(branch)
newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
if len(newheads) == 1 and len(newchildren):
if newchildren[0] != parent:
return hg.update(repo, newchildren[0])
else:
return 0
# Are there more than one additional branch heads?
newchildren = [n for n in newchildren if n != parent]
newparent = parent
if newchildren:
newparent = newchildren[0]
hg.clean(repo, newparent)
newheads = [n for n in newheads if n != newparent]
if len(newheads) > 1:
ui.status(_('not merging with %d other new branch heads '
'(use "hg heads ." and "hg merge" to merge them)\n') %
(len(newheads) - 1))
return 1
if not newheads:
return 0
# Otherwise, let's merge.
err = False
if newheads:
# By default, we consider the repository we're pulling
# *from* as authoritative, so we merge our changes into
# theirs.
if opts['switch_parent']:
firstparent, secondparent = newparent, newheads[0]
else:
firstparent, secondparent = newheads[0], newparent
ui.status(_('updating to %d:%s\n') %
(repo.changelog.rev(firstparent),
short(firstparent)))
hg.clean(repo, firstparent)
ui.status(_('merging with %d:%s\n') %
(repo.changelog.rev(secondparent), short(secondparent)))
err = hg.merge(repo, secondparent, remind=False)
if not err:
# we don't translate commit messages
message = (cmdutil.logmessage(ui, opts) or
('Automated merge with %s' %
util.removeauth(other.url())))
editopt = opts.get('edit') or opts.get('force_editor')
editor = cmdutil.getcommiteditor(edit=editopt, editform='fetch')
n = repo.commit(message, opts['user'], opts['date'], editor=editor)
ui.status(_('new changeset %d:%s merges remote changes '
'with local\n') % (repo.changelog.rev(n),
short(n)))
return err
finally:
release(lock, wlock)