branchmap: skip obsolete revisions while computing heads
It's time to make this part of core Mercurial obsolescence-aware.
Not considering obsolete revisions when computing heads is clearly what
Mercurial should do. But there are a couple of small issues:
- Let's say tip of the repo is obsolete. There are two ways of finding tiprev
for branchcache (both are in use): looking at input data for update() and
looking at computed heads after update(). Previously, repo tip would be
tiprev of the branchcache. With this patch, an obsolete revision can no
longer be tiprev. And depending on what way we use for finding tiprev (input
data vs computed heads) we'll get a different result. This is relevant when
recomputing cache key from cache contents, and may lead to updating cache for
obsolete revisions multiple times (not from scratch, because it still would
be considered valid for a subset of revisions in the repo).
- If all commits on a branch are obsolete, the branchcache will include that
branch, but the list of heads will be empty (that's why there's now `if not
heads` when recomputing tiprev/tipnode from cache contents). Having an entry
for every branch is currently required for notify extension (and
test-notify.t to pass), because notify doesn't handle revsets in its
subscription config very well and will throw an error if e.g. a branch
doesn't exist.
- Cloning static HTTP repos may try to stat() a non-existent obsstore file. The
issue is that we now care about obsolescence during clone, but statichttpvfs
doesn't implement a stat method, so a regular vfs.stat() is used, and it
assumes that file is local and calls os.stat(). During a clone, we're trying
to stat() .hg/store/obsstore, but in static HTTP case we provide a literal
URL to the obsstore file on the remote as if it were a local file path. On
windows it actually results in a failure in test-static-http.t.
The first issue is going to be addressed in a series dedicated to making sure
branchcache is properly and timely written on disk (it wasn't perfect even
before this patch, but there aren't enough tests to demonstrate that). The
second issue will be addressed in a future patch for notify extension that will
make it not raise an exception if a branch doesn't exist. And the third one was
partially addressed in the previous patch in this series and will be properly
fixed in a future patch when this series is accepted.
filteredhash() grows a keyword argument to make sure that branchcache is also
invalidated when there are new obsolete revisions in its repo view. This way
the on-disk cache format is unchanged and compatible between versions (although
it will obviously be recomputed when switching versions before/after this patch
and the repo has obsolete revisions).
There's one test that uses plain `hg up` without arguments while updated to a
pruned commit. To make this test pass, simply return current working directory
parent. Later in this series this code will be replaced by what prune command
does: updating to the closest non-obsolete ancestor.
Test changes:
test-branch-change.t: update branch head and cache update message. The head of
default listed in hg heads is changed because revision 2 was rewritten as 7,
and 1 is the closest ancestor on the same branch, so it's the head of default
now.
The cache invalidation message appears now because of the cache hash change,
since we're now accounting for obsolete revisions. Here's some context:
"served.hidden" repo filter means everything is visible (no filtered
revisions), so before this series branch2-served.hidden file would not contain
any cache hash, only revnum and node. Now it also has a hash when there are
obsolete changesets in the repo. The command that the message appears for is
changing branch of 5 and 6, which are now obsolete, so the cache hash changes.
In general, when cache is simply out-of-date, it can be updated using the old
version as a base. But if cache hash differs, then the cache for that
particular repo filter is recomputed (at least with the current
implementation). This is what happens here.
test-obsmarker-template.t: the pull reports 2 heads changed, but after that the
repo correctly sees only 1. The new message could be better, but it's still an
improvement over the previous one where hg pull suggested merging with an
obsolete revision.
test-obsolete.t: we can see these revisions in hg log --hidden, but they
shouldn't be considered heads even with --hidden.
test-rebase-obsolete{,2}.t: there were new heads created previously after
making new orphan changesets, but they weren't detected. Now we are properly
detecting and reporting them.
test-rebase-obsolete4.t: there's only one head now because the other head is
pruned and was falsely reported before.
test-static-http.t: add obsstore to the list of requested files. This file
doesn't exist on the remotes, but clients want it anyway (they get 404). This
is fine, because there are other nonexistent files that clients request, like
.hg/bookmarks or .hg/cache/tags2-served.
Differential Revision: https://phab.mercurial-scm.org/D12097
$ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ hg init
$ hg qinit
$ echo x > x
$ hg ci -Ama
adding x
$ hg qnew a.patch
$ echo a > a
$ hg add a
$ hg qrefresh
$ hg qnew b.patch
$ echo b > b
$ hg add b
$ hg qrefresh
$ hg qnew c.patch
$ echo c > c
$ hg add c
$ hg qrefresh
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
should fail
$ hg qguard does-not-exist.patch +bleh
abort: no patch named does-not-exist.patch
[255]
should fail
$ hg qguard +fail
abort: no patches applied
[255]
$ hg qpush
applying a.patch
now at: a.patch
should guard a.patch
$ hg qguard +a
should print +a
$ hg qguard
a.patch: +a
$ hg qpop
popping a.patch
patch queue now empty
should fail
$ hg qpush a.patch
cannot push 'a.patch' - guarded by '+a'
[1]
$ hg qguard a.patch
a.patch: +a
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop
popping b.patch
patch queue now empty
test selection of an empty guard
$ hg qselect ""
abort: guard cannot be an empty string
[255]
$ hg qselect a
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qguard -- c.patch -a
should print -a
$ hg qguard c.patch
c.patch: -a
should skip c.patch
$ hg qpush -a
applying b.patch
skipping c.patch - guarded by '-a'
now at: b.patch
$ hg qnext
all patches applied
[1]
should display b.patch
$ hg qtop
b.patch
$ hg qguard -n c.patch
should push c.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
$ hg qselect -n
guards deactivated
number of unguarded, unapplied patches has changed from 3 to 2
should push all
$ hg qpush -a
applying b.patch
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qguard a.patch +1
$ hg qguard b.patch +2
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
should push a.patch, not b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping a.patch
patch queue now empty
$ hg qselect 2
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qprev
b.patch
Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.
$ hg qtop
c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qselect 1 2
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch, b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop -a
popping b.patch
popping a.patch
patch queue now empty
$ hg qguard -- a.patch +1 +2 -3
$ hg qselect 1 2 3
number of unguarded, unapplied patches has changed from 3 to 2
list patches and guards
$ hg qguard -l
a.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
have at least one patch applied to test coloring
$ hg qpush
applying b.patch
now at: b.patch
list patches and guards with color
$ hg --config extensions.color= qguard --config color.mode=ansi \
> -l --color=always
\x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
\x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
\x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)
should pop b.patch
$ hg qpop
popping b.patch
patch queue now empty
list series
$ hg qseries -v
0 G a.patch
1 U b.patch
2 U c.patch
list guards
$ hg qselect
1
2
3
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qselect -n --reapply -v
guards deactivated
popping guarded patches
popping c.patch
popping b.patch
patch queue now empty
reapplying unguarded patches
skipping a.patch - guarded by '+1' '+2'
skipping b.patch - guarded by '+2'
skipping a.patch - guarded by '+1' '+2'
skipping b.patch - guarded by '+2'
applying c.patch
patching file c
adding c
committing files:
c
committing manifest
committing changelog
now at: c.patch
guards in series file: +1 +2 -3
$ hg qselect -s
+1
+2
-3
should show c.patch
$ hg qapplied
c.patch
$ hg qrename a.patch new.patch
should show :
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qnew d.patch
$ hg qpop
popping d.patch
now at: c.patch
should show new.patch and b.patch as Guarded, c.patch as Applied
and d.patch as Unapplied
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 U d.patch
qseries again, but with color
$ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
3 U \x1b[0;30;1md.patch\x1b[0m (esc)
$ hg qguard d.patch +2
new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 G d.patch
$ qappunappv()
> {
> for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
> echo % hg $command
> hg $command
> done
> }
$ hg qpop -a
popping c.patch
patch queue now empty
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
d.patch: +2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
c.patch
% hg qunapplied -v
0 G new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
new.patch
c.patch
% hg qunapplied -v
0 U new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qpush -a
applying new.patch
skipping b.patch - guarded by '+2'
applying c.patch
skipping d.patch - guarded by '+2'
now at: c.patch
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 G b.patch
2 A c.patch
% hg qunapplied
% hg qunapplied -v
3 G d.patch
$ hg qselect 2
number of unguarded, unapplied patches has changed from 0 to 1
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 U b.patch
2 A c.patch
% hg qunapplied
d.patch
% hg qunapplied -v
3 U d.patch
$ for patch in `hg qseries`; do
> echo % hg qapplied $patch
> hg qapplied $patch
> echo % hg qunapplied $patch
> hg qunapplied $patch
> done
% hg qapplied new.patch
new.patch
% hg qunapplied new.patch
b.patch
d.patch
% hg qapplied b.patch
new.patch
% hg qunapplied b.patch
d.patch
% hg qapplied c.patch
new.patch
c.patch
% hg qunapplied c.patch
d.patch
% hg qapplied d.patch
new.patch
c.patch
% hg qunapplied d.patch
hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past
$ hg qdelete -k b.patch
$ hg qseries -m
b.patch
hg qseries -m with color
$ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
\x1b[0;31;1mb.patch\x1b[0m (esc)
excercise corner cases in "qselect --reapply"
$ hg qpop -a
popping c.patch
popping new.patch
patch queue now empty
$ hg qguard -- new.patch -not-new
$ hg qguard -- c.patch -not-c
$ hg qguard -- d.patch -not-d
$ hg qpush -a
applying new.patch
applying c.patch
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qguard -l
new.patch: -not-new
c.patch: -not-c
d.patch: -not-d
$ hg qselect --reapply not-d
popping guarded patches
popping d.patch
now at: c.patch
reapplying unguarded patches
cannot push 'd.patch' - guarded by '-not-d'
$ hg qser -v
0 A new.patch
1 A c.patch
2 G d.patch
$ hg qselect --reapply -n
guards deactivated
$ hg qpush
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 A new.patch
1 A c.patch
2 A d.patch
$ hg qselect --reapply not-c
popping guarded patches
popping d.patch
popping c.patch
now at: new.patch
reapplying unguarded patches
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 A new.patch
1 G c.patch
2 A d.patch
$ hg qselect --reapply not-new
popping guarded patches
popping d.patch
popping new.patch
patch queue now empty
reapplying unguarded patches
applying c.patch
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 G new.patch
1 A c.patch
2 A d.patch
test that qselect shows "number of guarded, applied patches" correctly
$ hg qimport -q -e b.patch
adding b.patch to series file
$ hg qguard -- b.patch -not-b
$ hg qpop -a -q
patch queue now empty
$ hg qunapplied -v
0 G new.patch
1 U c.patch
2 U d.patch
3 U b.patch
$ hg qselect not-new not-c
number of unguarded, unapplied patches has changed from 3 to 2
$ hg qpush -q -a
patch d.patch is empty
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 A d.patch
3 A b.patch
$ hg qselect --none
guards deactivated
$ hg qselect not-new not-c not-d
number of guarded, applied patches has changed from 0 to 1
test that "qselect --reapply" reapplies patches successfully when the
already applied patch becomes unguarded and it follows the already
guarded (= not yet applied) one.
$ hg qpop -q -a
patch queue now empty
$ hg qselect not-new not-c
number of unguarded, unapplied patches has changed from 1 to 2
$ hg qpush -q -a
patch d.patch is empty
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 A d.patch
3 A b.patch
$ hg qselect -q --reapply not-c not-b
now at: d.patch
cannot push 'b.patch' - guarded by '-not-b'
$ hg qseries -v
0 U new.patch
1 G c.patch
2 A d.patch
3 G b.patch
test that "qselect --reapply" checks applied patches correctly when no
applied patches becomes guarded but some of unapplied ones become
unguarded.
$ hg qpop -q -a
patch queue now empty
$ hg qselect not-new not-c not-d
number of unguarded, unapplied patches has changed from 2 to 1
$ hg qpush -q -a
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 G d.patch
3 A b.patch
$ hg qselect -q --reapply not-new not-c
$ hg qseries -v
0 G new.patch
1 G c.patch
2 U d.patch
3 A b.patch