py3: make stdout line-buffered if connected to a TTY
Status messages that are to be shown on the terminal should be written to the
file descriptor before anything further is done, to keep the user updated.
One common way to achieve this is to make stdout line-buffered if it is
connected to a TTY. This is done on Python 2 (except on Windows, where libc,
which the CPython 2 streams depend on, does not properly support this).
Python 3 rolls it own I/O streams. On Python 3, buffered binary streams can't be
set line-buffered. The previous code (added in 227ba1afcb65) incorrectly
assumed that on Python 3, pycompat.stdout (sys.stdout.buffer) is already
line-buffered. However the interpreter initializes it with a block-buffered
stream or an unbuffered stream (when the -u option or the PYTHONUNBUFFERED
environment variable is set), never with a line-buffered stream.
One example where the current behavior is unacceptable is when running
`hg pull https://www.mercurial-scm.org/repo/hg` on Python 3, where the line
"pulling from https://www.mercurial-scm.org/repo/hg" does not appear on the
terminal before the hg process blocks while waiting for the server.
Various approaches to fix this problem are possible, including:
1. Weaken the contract of procutil.stdout to not give any guarantees about
buffering behavior. In this case, users of procutil.stdout need to be
changed to do enough flushes. In particular,
1. either ui must insert enough flushes for ui.write() and friends, or
2. ui.write() and friends get split into flushing and fully buffered
methods, or
3. users of ui.write() and friends must flush explicitly.
2. Make stdout unbuffered.
3. Make stdout line-buffered. Since Python 3 does not natively support that for
binary streams, we must implement it ourselves.
(2.) is problematic because using unbuffered I/O changes the performance
characteristics significantly compared to line-buffered (which is used on
Python 2) and this would be a regression.
(1.2.) and (1.3) are a substantial amount of work. It’s unclear whether the
added complexity would be justified, given that raw performance doesn’t matter
that much when writing to a terminal much faster than the user could read it.
(1.1.) pushes complexity into the ui class instead of separating the concern of
how stdout is buffered. Other users of procutil.stdout would still need to take
care of the flushes.
This patch implements (3.). The general performance considerations are very
similar to (1.1.). The extra method invocation and method forwarding add a
little more overhead if the class is used. In exchange, it doesn’t add overhead
if not used.
For the benchmarks, I compared the previous implementation (incorrect on Python
3), (1.1.), (3.) and (2.). The command was chosen so that the streams were
configured as if they were writing to a TTY, but actually write to a pager,
which is also the default:
HGRCPATH=/dev/null python3 ./hg --cwd ~/vcs/mozilla-central --time --pager yes --config pager.pager='cat > /dev/null' status --all
previous:
time: real 7.880 secs (user 7.290+0.050 sys 0.580+0.170)
time: real 7.830 secs (user 7.220+0.070 sys 0.590+0.140)
time: real 7.800 secs (user 7.210+0.050 sys 0.570+0.170)
(1.1.) using Yuya Nishihara’s patch:
time: real 9.860 secs (user 8.670+0.350 sys 1.160+0.830)
time: real 9.540 secs (user 8.430+0.370 sys 1.100+0.770)
time: real 9.830 secs (user 8.630+0.370 sys 1.180+0.840)
(3.) using this patch:
time: real 9.580 secs (user 8.480+0.350 sys 1.090+0.770)
time: real 9.670 secs (user 8.480+0.330 sys 1.170+0.860)
time: real 9.640 secs (user 8.500+0.350 sys 1.130+0.810)
(2.) using a previous patch by me:
time: real 10.480 secs (user 8.850+0.720 sys 1.590+1.500)
time: real 10.490 secs (user 8.750+0.750 sys 1.710+1.470)
time: real 10.240 secs (user 8.600+0.700 sys 1.590+1.510)
As expected, there’s no difference on Python 2, as exactly the same code paths
are used:
previous:
time: real 6.950 secs (user 5.870+0.330 sys 1.070+0.770)
time: real 7.040 secs (user 6.040+0.360 sys 0.980+0.750)
time: real 7.070 secs (user 5.950+0.360 sys 1.100+0.760)
this patch:
time: real 7.010 secs (user 5.900+0.390 sys 1.070+0.730)
time: real 7.000 secs (user 5.850+0.350 sys 1.120+0.760)
time: real 7.000 secs (user 5.790+0.380 sys 1.170+0.710)
Testing cloning with the EOL extension
$ cat >> $HGRCPATH <<EOF
> [extensions]
> eol =
>
> [eol]
> native = CRLF
> EOF
setup repository
$ hg init repo
$ cd repo
$ cat > .hgeol <<EOF
> [patterns]
> **.txt = native
> EOF
$ printf "first\r\nsecond\r\nthird\r\n" > a.txt
$ hg commit --addremove -m 'checkin'
adding .hgeol
adding a.txt
Test commit of removed .hgeol and how it immediately makes the automatic
changes explicit and committable.
$ cd ..
$ hg clone repo repo-2
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd repo-2
$ cat a.txt
first\r (esc)
second\r (esc)
third\r (esc)
$ hg cat a.txt
first
second
third
$ hg remove .hgeol
$ touch a.txt * # ensure consistent st dirtyness checks, ignoring dirstate timing
$ hg st -v --debug
M a.txt
R .hgeol
$ hg commit -m 'remove eol'
$ hg exp
# HG changeset patch
# User test
# Date 0 0
# Thu Jan 01 00:00:00 1970 +0000
# Node ID 3c20c2d90333b6ecdc8f7aa8f9b73223c7c7a608
# Parent 90f94e2cf4e24628afddd641688dfe4cd476d6e4
remove eol
diff -r 90f94e2cf4e2 -r 3c20c2d90333 .hgeol
--- a/.hgeol Thu Jan 01 00:00:00 1970 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +0,0 @@
-[patterns]
-**.txt = native
diff -r 90f94e2cf4e2 -r 3c20c2d90333 a.txt
--- a/a.txt Thu Jan 01 00:00:00 1970 +0000
+++ b/a.txt Thu Jan 01 00:00:00 1970 +0000
@@ -1,3 +1,3 @@
-first
-second
-third
+first\r (esc)
+second\r (esc)
+third\r (esc)
$ hg push --quiet
$ cd ..
Test clone of repo with .hgeol in working dir, but no .hgeol in default
checkout revision tip. The repo is correctly updated to be consistent and have
the exact content checked out without filtering, ignoring the current .hgeol in
the source repo:
$ cat repo/.hgeol
[patterns]
**.txt = native
$ hg clone repo repo-3 -v --debug
linked 7 files
updating to branch default
resolving manifests
branchmerge: False, force: False, partial: False
ancestor: 000000000000, local: 000000000000+, remote: 3c20c2d90333
calling hook preupdate.eol: hgext.eol.preupdate
a.txt: remote created -> g
getting a.txt
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd repo-3
$ cat a.txt
first\r (esc)
second\r (esc)
third\r (esc)
Test clone of revision with .hgeol
$ cd ..
$ hg clone -r 0 repo repo-4
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets 90f94e2cf4e2
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd repo-4
$ cat .hgeol
[patterns]
**.txt = native
$ cat a.txt
first\r (esc)
second\r (esc)
third\r (esc)
$ cd ..